KMITL

Permanent URI for this communityhttps://dspace.kmitl.ac.th/handle/123456789/1

Browse

Settings

Author: search.filters.author.Buaphuen, P.Subject: search.filters.subject.composite

Search Results

Now showing 1 - 2 of 2
  • Loading...
    Thumbnail Image
    Some of the metrics are blocked by your 
    consent settings
    Item type:Publication,
    Recycling of Broken Waste Glass as Polyethylene Nanofiller for Electrical Insulating System
    (2022-01-01)
    Vittayakorn, W.
    ;
    Khunna, D.
    ;
    Buaphuen, P.
    ;
    Vittayakorn, N.
    ;
    Makcharoen, W.
    This work focuses on the preparation of a high-quality glass powder from the broken windowpane. The expected glass powder must show a high amount of silicon dioxide with fine particle size. The processing technique used in this work is coarse grinding and high-speed vibratory milling under a variety of conditions to get the best quality of glass powder. The particle size and particle size distribution were examined by using DLS technique. The chemical composition was examined by EDX together with FT-IR and XRF spectroscopies. The results showed that the wide range of particle size distribution occurred in all milling conditions, which approximately ranged from 0.3 to 7 µm, and the 270 min-milling time showed the smallest particle size of glass powder. The chemical analysis showed that the glass powder is rich in silica which contained about 70.47% of SiO<inf>2</inf>. After that, the various ratios of the glass powder/HDPE composites were formed by using the traditional casting method. The physical and electrical properties were investigated for all composites. The results showed that after adding glass powder into the HDPE matrix, the ε<inf>r</inf> value significantly drops due to the inorganic filler suppressed polarization within the systems. For the resistivity, the ρ value significantly increases after adding glass powder to the HDPE matrix for all compositions because this filler promotes the hinder of electric current flow. Finally, it can conclude that the waste glass powder can use as a filler in the HDPE-based composite as better as the commercial SiO<inf>2</inf> powder for the electrical insulting application.
  • Loading...
    Thumbnail Image
    Some of the metrics are blocked by your 
    consent settings
    Item type:Publication,
    Utilization of Waste Glass Powder as a Filler in Epoxy Resin Based Composite
    (2021-01-01)
    Buaphuen, P.
    ;
    Khunna, D.
    ;
    Vittayakorn, W.
    This work focuses on the preparation of a high-quality glass powder from broken household waste glass. The expected glass powder prepared from household waste must show a high amount of silicon dioxide with fine particle size. The processing technique used in this work is coarse grinding and high-speed vibratory milling under a variety of conditions to get the best quality of glass powder. The particle size and particle size distribution were examined by using DLS technique. The chemical composition was examined by EDX together with FT-IR and XRF spectroscopies. The morphology of all glass powders was investigated by SEM. The results showed that the wide range of particle size distribution occurred in all milling conditions, which approximately ranged from 1 to 10 µm, and the 4 h-milling time showed the smallest particle size of glass powder. The chemical analysis showed that the glass powder was rich in silica which contained about 67% of SiO<inf>2</inf>. After that, the various ratios of the glass powder/epoxy resin composites were formed by using the traditional casting method. The physical, mechanical and electrical properties were investigated for all composites. The results showed that the H<inf>v</inf> value of the glass powder/epoxy resin composites exhibited a much higher value than that of pure epoxy resin. For the electrical properties, after added 1 wt% of glass powder into the matrix, the ε<inf>r</inf> and R significantly increased. The E<inf>b</inf> value of the composite prepared from waste glass powder showed no significant difference from the composite prepared from commercial SiO<inf>2</inf>. So, it can say that the waste glass powder can be used as a filler in the epoxy resin-based composite as well as the commercial SiO<inf>2</inf> powder for the electrical insulting application.