KMITL

Permanent URI for this communityhttps://dspace.kmitl.ac.th/handle/123456789/1

Browse

Search Results

Now showing 1 - 10 of 12

Some of the metrics are blocked by your
consent settings
Fabrication of BNBT-BS ceramics via a solid-state combustion approach for BNBT-BS/PDMS composite films in hybrid PENG/TENG applications
(2026-10-01)
Luangpangai, Anupong
;
Apirattanon, Nattapong
;
Yimsabai, Sununta
;
Sumang, Rattiphorn
;
Rittidech, Aurawan
Synthesis of (1-x)Bi<inf>0.47</inf>Na<inf>0.47</inf>Ba<inf>0.06</inf>TiO<inf>3</inf>-xBaSnO<inf>3</inf> ceramics (BNBT-xBS, where 0 ≤ x ≤ 0.05) was accomplished via a solid-state combustion approach. The influence of BaSnO<inf>3</inf> concentration on the phase structure, microstructure, dielectric, ferroelectric and strain properties was thoroughly examined. All specimens exhibited the coexistence of rhombohedral and tetragonal phases within a pure perovskite structure. The composition with x = 0.01 demonstrated optimal electrical properties, achieving a dielectric constant (ɛ<inf>m</inf>) of 6199, a maximum polarization (P<inf>max</inf>) of 41.86 μC/cm2, a maximum strain (S<inf>max</inf>) of 0.34% and a normalized strain (d<inf>33</inf>*) of 489 pm/V. The ceramic powder of BNBT-0.01BS was incorporated into a PDMS matrix at concentrations ranging from 0 to 30 wt%. The hybrid PENG/TENG devices achieved their largest electrical output at a BNBT-0.01BS loading of 20 wt%, recording a voltage of 92 V and a current of 0.50 μA. This work outlines a fabrication and development method for composite films with BNBT-0.01BS with PDMS polymers for high-efficiency nanogenerators, playing an important role in improving future energy harvesting technologies.
Some of the metrics are blocked by your
consent settings
Electric and magnetic properties of multiferroic CZFMO doped BNLTBKTBaT composite ceramics prepared via the solid-state combustion method
(2025-07-01)
Klinbanmor, Metarsit
;
Thatawong, Bhoowadol
;
Somsri, Widchaya
;
Prasertpalichat, Sasiphon
;
Vittayakorn, Naratip
The present research work describes in detail investigations of the multiferroic properties of (1-x) (0.85Bi<inf>0.5</inf>Na<inf>0.475</inf>Li<inf>0.025</inf>TiO<inf>3</inf>-0.11Bi<inf>0.5</inf>K<inf>0.5</inf>TiO<inf>3</inf>-0.04BaTiO<inf>3</inf>)-xCo<inf>0.6</inf>Zn<inf>0.4</inf>Fe<inf>1.7</inf>Mn<inf>0.3</inf>O<inf>4</inf> [(1-x)BNLTBKTBaT-xCZFMO]; x = 0, 0.05, 0.10, 0.15 and 0.20 composite ceramics, synthesized by the solid-state combustion technique. The effect of increasing x content on the phase structure, microstructure, electrical and magnetic properties of (1-x)BNLTBKTBaT-xCZFMO composite ceramics was investigated. X-ray diffraction patterns of the BNLTBKTBaT sample showed a pure perovskite phase (rhombohedral and tetragonal structures). When CZFMO was added, the XRD patterns showed a co-structure between perovskite and cubic spinel ferrite structures. The composite grains were composed of large and small sizes, which were composed of mainly the elements of BNLTBKTBaT and CZFMO, respectively. As x increased, the average grain size of the larger grains increased, and the smaller grains got smaller. The density decreased from 5.54 to 4.61 g/cm3 as x increased. Increasing the amount of CZFMO in BNLTBKTBaT also resulted in a decrease in the dielectric constant (ε<inf>r</inf>) and the remnant polarization (P<inf>r</inf>), with the leakage current observed at x = 0.20. The saturation magnetization (M<inf>s</inf>) and the magnetoelectric coupling coefficient (α<inf>E</inf>) increased with increased x. It was found that x = 0.15 gave the optimal electric, magnetic, and magnetoelectric properties (ε<inf>r</inf> = 425, P<inf>r</inf> = 1.64 μC/cm, M<inf>s</inf> = 1.1948 emu/g and α<inf>E</inf> = 4.88 mV/cm-Oe), which makes the composite potentially more applicable for information technology and spintronics devices.
Some of the metrics are blocked by your
consent settings
INFLUENCE OF Pr6O11-DOPING ON THE CRYSTAL STRUCTURE AND ELECTRICAL PROPERTIES OF BNBT PIEZOELECTRIC CERAMICS
(2025-01-01)
Yotthuan, Surirat
;
Sawangboon, Nuttawan
;
Meechoowas, Ekarat
;
Bongkarn, Theerachai
;
Vittayakorn, Naratip
In this work, a series of lead-free 0.97(Bi<inf>0.5</inf>Na<inf>0.5</inf>)TiO<inf>3-</inf>0.03BaTiO<inf>3-x</inf>Pr<inf>6</inf>O<inf>11</inf> (BNBT-xPr) piezoelectric materials with x=0, 0.1, 0.3, 0.5, and 0.7 wt.% were created by the solid-state combustion route, to enhance their electric properties. The investigation on the phase evolution, microstructure, and electrical behavior of the specimens were carried out. The powders and ceramics were calcined and sintered for two hours at 800℃ and 1180℃, correspondingly. All examples displayed a perfect perovskite lattice and no detectable impurity phase. XRD pattern examination for the ceramics disclosed the existence of rhombohedral and tetragonal phases in all examples. The rhombohedral phase was boosted by rising the doping levels, as established by the Rietveld refinement study. As the x content rose, the average grain size and measured density began to decrease from 0.90±0.10 to 0.73±0.07 μm and 6.13 to 6.05 g/cm3, correspondingly. It was noticed that Pr<inf>6</inf>O<inf>11</inf> doping, decreased dielectric properties. The remnant polarization (Pr) of the samples rises from 22.2 to 27.7 μC/cm2 with x rises from 0 to 0.3 and then dropped. The coercive field (Ec) of the ceramics rises significantly when Pr<inf>6</inf>O<inf>11</inf> was incorporated. The BNBT lead-free ceramics doped with 0.3wt%Pr<inf>6</inf>O<inf>11</inf>, with a high Pr value, could be a promising candidate for memory applications to replace Pb-based ceramics.
Some of the metrics are blocked by your
consent settings
EFFECT OF (AlNb)4+ B-SITES SUBSTITUTION ON THE PHASE STRUCTURE, MICROSTRUCTURE AND ELECTRICAL PROPERTIES OF Bi0.47Na0.47Ba0.06TiO3 CERAMICS
(2025-01-01)
Luangpangai, Anupong
;
Chongsatan, Wistsarut
;
Charoenthai, Nipaphat
;
Chootin, Suphornphun
;
Vittayakorn, Naratip
Bi0.47Na0.47Ba0.06Ti1-x(Al0.5Nb0.5)xO3 (abbreviated as BNBT1-xANx) lead-free ceramics (x=0-0.05) were synthesized by the solid-state combustion technique. The effect of (AlNb)4+ content on the phase structure, microstructure and electrical properties was investigated. A pure perovskite structure was obtained from all specimens. Rietveld refinement revealed coexisting rhombohedral and tetragonal phases in all samples and the tetragonal phase increased with increased AlNb content (x). The morphology of the BNBT1-xANx ceramics displayed nearly round grains and anisotropic grain growth. Average grain size decreased from 1.8 to 0.7 µm when x increased from 0 to 0.05 and the grain size distribution became narrower. The density, maximum dielectric constant and remnant polarization rapidly decreased with increased x. The deterioration of the electrical properties induced by (AlNb)4+ substitution was due to shifting away from the morphotropic phase boundary (MPB), poor microstructure and low density.
Some of the metrics are blocked by your
consent settings
PHASE FORMATION, MICROSTRUCTURE AND ELECTRIC PROPERTIES OF La3+ SUBSTITUTION IN B-SITE OF LEAD-FREE BaTi0.91Sn0.09O3 CERAMICS
(2025-01-01)
Pattanakasem, Wiwat
;
Charoenthai, Nipaphat
;
Vittayakorn, Naratip
;
Thongyong, Nateeporn
;
Thongbai, Prasit
The study explored the influence of La3+ substitution at the B-site in BaTi0.91Sn0.09O3 (BTS) ceramics on their phase structure, microstructure, and electrical characteristics. La3+-doped BTS ceramics, denoted as Ba(Ti0.91Sn0.09)1-xLaxO3 (BTSL) with x = 0, 0.005, 0.010, 0.015, and 0.020, were synthesized via the conventional solid-state reaction method. The calcination and sintering processes were carried out at 1200°C for 2 hours and 1400–1450 °C for 4 hours, respectively. Results indicated that the undoped BTSL sample (x = 0) exhibited a pure perovskite phase without detectable impurities. However, when x ranged from 0.005 to 0.020, secondary impurity phases were observed alongside the perovskite structure. Phase analysis revealed that BTSL ceramics consisted of orthorhombic (O) and tetragonal (T) phases for x = 0–0.005, transitioned to a presence of O, T, and cubic (C) phases at x = 0.010–0.015, and exhibited only the C phase at x = 0.020. Rietveld refinement confirmed that La3+ occupied both A- and B-sites for compositions with x ≥ 0.005. As La3+ concentration increased, the average grain size and remnant polarization initially showed a slight reduction (x = 0 to 0.005) before significantly decreasing (x = 0.010 to 0.015). The Curie temperature (TC) was 43°C for x = 0, slightly increased to 44°C for x = 0.005, and then greatly decreased as x increased to 0.020.
Some of the metrics are blocked by your
consent settings
PHASE FORMATION AND ELECTRICAL PROPERTIES OF BCLTS CERAMICS SYNTHESIZED VIA THE SOLID-STATE COMBUSTION TECHNIQUE
(2025-01-01)
Somsri, Widchaya
;
Charoenthai, Nipaphat
;
Sutthapintu, Aekkasit
;
Noisak, Jitrawan
;
Vittayakorn, Naratip
Lead-free Ba<inf>0.93</inf>Ca<inf>0.04</inf>La<inf>0.03</inf>Ti<inf>0.90</inf>Sn<inf>0.10</inf>O<inf>3</inf> (BCLTS) ceramics were fabricated via solid-state combustion technique. The BCLTS powders were calcined in a temperature range of 1075-1175°C for 2h and sintered in a temperature range of 1350-1450°C for 2h. The BCLTS powders exhibited a pure perovskite phase when calcined above 1150°C. All BCLTS ceramic samples displayed a perovskite structure with coexisting cubic and tetragonal phases, with a secondary phase observed only at 1450°C. The growth of grain size was increased with increasing sintering temperature (0.42 to 0.65 μm.). The highest dielectric and ferroelectric properties (ε<inf>r</inf>=3047, tan δ<inf>r</inf> = 0.029, P<inf>max</inf> = 9.52 μC/cm2, P<inf>r</inf> = 0.48 μC/cm2, E<inf>c</inf>= 1.04 kV/cm) were obtained at the sintering temperature of 1400°C. The altered phase structure in this research, compared to earlier studies, results in distinct outcomes for the dielectric and ferroelectric properties.
Some of the metrics are blocked by your
consent settings
EFFECT OF FIRING TEMPERATURE ON THE PHASE FORMATION, MICROSTRUCTURE, AND ELECTRICAL PROPERTIES OF BST-BZN CERAMICS
(2025-01-01)
Somsri, Widchaya
;
Duangkeaw, Panadda
;
Sumang, Rattiphorn
;
Pulphol, Phieraya
;
Vittayakorn, Naratip
Lead-free 0.88Ba0.8Sr0.2TiO3-0.12Bi(Zn2/3Nb1/3)O3 (BST-BZN) ceramics were prepared by the solid-state combustion technique, using glycine as fuel. The BST-BZN ceramics were calcined between 900–1100°C for 2 h and sintered between 1300–1400°C for 2 h. A pure perovskite phase with a pseudo-cubic structure was observed by XRD and confirmed by the Rietveld refinement technique. The average particle and grain sizes tended to increase with increased calcination and sintering temperatures. The measured density was in the range of 5.65–5.90 g/cm3. The dielectric constant (εr) and dielectric loss (tan δr) decreased with increased sintering temperatures, up to 1350°C and then increased. The energy storage density (Wtotal) and energy storage efficiency (η) of the ceramics were 0.488 J/cm3 and 94.1% measured at 100 kV/cm, respectively, obtained by the sample sintered at 1375°C
Some of the metrics are blocked by your
consent settings
EFFECT OF FIRING TEMPERATURES ON THE PHASE STRUCTURE AND ELECTRICAL PROPERTIES OF BNT-BT-0.1NT CERAMICS SYNTHESIZED VIA THE SOLID-STATE COMBUSTION TECHNIQUE
(2025-01-01)
Thatawong, Bhoowadol
;
Tagerd, Kanyanut
;
Vittayakorn, Naratip
;
Udeye, Thanya
;
Bongkarn, Theerachai
Lead-free ceramic materials of 0.9(0.92Bi0.5Na0.5TiO3-0.08BaTiO3)-0.1NaTaO3 or BNT-BT-0.1NT were obtained using glycine as fuel by a solid-state combustion process. The significance of heat treatment conditions, including calcination at 600-800°C for 2 h and sintering at 1075-1175°C for 2 h, on the structure of the phase, microstructure, electrical and energy-storage properties of BNT-BT-0.1NT ceramics were performed. The perovskite phase was presented for all powder samples. BNT-BT-0.1NT powders calcined at the temperature of 750°C for 2 h showed a 100% pure perovskite phase. The particles morphology exhibited spherical shapes with a wide distribution. As the calcination temperature increased, the average particle size grew from 340 nm to 370 nm. Rietveld refinement confirmed that the BNT-BT-0.1NT ceramics possessed a uniform ABO3 structure with cohabiting of rhombohedral (R), tetragonal (T), and cubic (C) phases. With a rise in sintering temperature, the average grain size expanded from 0.85 μm to 2.66 μm, while the remnant polarization (P<inf>r</inf>) and coercive field (E<inf>c</inf>) decreased. The samples sintered at 1150oC for 2 h, the ceramic highlighted the highest dielectric constant (ε<inf>max</inf> ~ 1827), high density of 5.83 g/cm3. Under an applied electric field of 70 kV/cm, the maximum energy storage density reached 0.71 J/cm3.
Some of the metrics are blocked by your
consent settings
PHASE FORMATION AND ELECTRICAL PROPERTIES OF Ba0.91Ca0.09Ti0.916Sn0.084O3-0.1WT%ZnO -0.1WT%MnO2 LEAD-FREE FERROELECTRIC CERAMICS SYNTHESIZED VIA THE SOLID-STATE COMBUSTION METHOD
(2025-01-01)
Yimsabai, Sununta
;
Somsri, Widchaya
;
Vittayakorn, Naratip
;
Charoenthai, Nipaphat
;
Suthapintu, Aekasit
This work investigated the effect of firing temperatures on the phase formation, microstructure, and electrical properties of Ba0.91Ca0.09Ti0.916Sn0.084O3-0.1wt%ZnO-0.1wt%MnO2 (BCTS-ZnMn) lead-free ferroelectric ceramics synthesized via the solid-state combustion method. Glycine was used as fuel to reduce the synthesis temperature. The samples were calcined at temperatures from 1050 to 1250°C (in 50°C increments) for 3 h and sintered from 1250 to 1450°C (in 50°C increments) for 3 h. A pure perovskite phase was found in the powders calcined above 1100°C. The phase structure, microstructure, dielectric and ferroelectric properties of the ceramics were examined. The X-ray diffraction (XRD) analysis for the ceramics revealed the presence of tetragonal (T) and orthorhombic (O) phases in all the ceramics. The average particle size and average grain size increased with increasing firing temperatures. The density, dielectric constant at the Curie temperature (ɛc), Pr and Ps tended to increase with increasing sintering temperatures, up to 1400°C, and then decreased at 1450°C. The ceramic sintered at 1400°C exhibited the highest density (5.89 g/cm3), dielectric response (ɛc = 13324) and good ferroelectric behavior (Pr = 8.67 μC/cm2, Ps = 17.92 μC/cm2 and Ec = 0.99 kV/cm).
Some of the metrics are blocked by your
consent settings
ELECTRICAL AND MAGNETIC PROPERTIES OF MULTIFERROIC Co0.6Zn0.4Fe1.7Mn0.3O4 DOPED 0.99Bi0.47Na0.47Ba0.06TiO3-0.01Ba(Sn0.70Nb0.24)O3 CERAMICS SYNTHESIZED VIA THE SOLID-STATE COMBUSTION TECHNIQUE
(2025-01-01)
Luangpangai, Anupong
;
Chuai, Phomphon
;
Rittidech, Aurawan
;
Pinitsoontorn, Supree
;
Jantaratana, Pongsakorn
Multiferroic (1-x)[0.99Bi<inf>0.47</inf>Na<inf>0.47</inf>Ba<inf>0.06</inf>TiO<inf>3</inf>-<inf>0.01</inf>Ba(Sn<inf>0.70</inf>Nb<inf>0.24</inf>)O<inf>3</inf>]-xCo<inf>0.6Z</inf>n<inf>0.4</inf>Fe<inf>1.7</inf>Mn<inf>0.3</inf>O<inf>4</inf> (abbreviated as BNBT-BSN-xCZFMO) ceramics with x ranging from 0 to 0.20 were fabricated using the solid-state combustion technique. The effect of varying BNBT-BSN: CZFMO ratios on the phase structure, microstructure, electrical and magnetic properties was investigated. X-ray diffraction (XRD) analysis of pure BNBT-BSN showed a perovskite structure with rhombohedral and tetragonal phases. The doped BNBT-BSN-xCZFMO ceramics displayed coexisting rhombohedral, tetragonal, and cubic spinel phases, with the cubic spinel phase increasing when the CZFMO content increased. In addition, the XRD peaks shifted to higher angles as the CZFMO content increased, indicating a decrease in lattice parameters. The dielectric constant decreased with higher CZFMO content and higher frequencies. The pure BNBT-BSN ceramic exhibited a saturated P-E loop with a Pmax of 33.2 µC/cm2, Pr of 26.1 µC/cm2, and an Ec of 14.5 kV/cm. With increased CZFMO content, non-saturated and bloated P-E loops with lower Pmax, Pr, and Ec were observed, implying a rise in the leakage current. The addition of CZFMO induced ferromagnetic behavior in the ceramics, leading to an increase in Ms and a reduction in Hc as CZFMO content increased. The magnetoelectric coupling coefficient of BNBT-BSN-xCZFMO ceramics continuously increased with higher CZFMO content.

KMITL

Browse

Filters

Settings

Sort By

Results per page

Search Results