Pimsarn, Monsak
Loading...
Preferred name
Pimsarn, Monsak
Alternative Name
Pimsarn, M.
Main Affiliation
Email
monsak.pi@kmitl.ac.th
1 results
Now showing 1 - 1 of 1
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Heat transfer characterization in a tubular heat exchanger with V-shaped rings(2017-01-05); ; This article presents the influence of V-shaped rings (or V-ring) placed in a uniform heat-fluxed tube on heat transfer and flow resistance characteristics. In the current experiment, the V-ring elements with attack angle of 30° are inserted into the tube with four relative ring-pitches (R<inf>P</inf> = P/D = 0.5, 1.0, 1.5 and 2.0) and three ring blockage ratios (R<inf>B</inf> = e/D = 0.1, 0.15 and 0.2). Air as the test fluid flows through the tube for Reynolds number of about 5000–25,000. The experimental results reveal that the V-ring can considerably enhance the heat transfer rate up to 5.8 times above the plain tube whereas the friction factor is up to 82 times. The increase in R<inf>B</inf> leads to higher heat transfer and friction loss while the increment in R<inf>P</inf> provides the reversing trend. The thermal enhancement factor of the V-ring is in the range of 1.36–1.63 where its maximum regarded as the optimum point is at R<inf>B</inf> = 0.1 and R<inf>P</inf> = 1.0. In comparison with other vortex-flow devices, the V-ring yields much higher thermal performance than the published inclined rings, wire-coils and twisted tapes. Nusselt number and friction factor correlations for the V-ring are also determined.