Maneerat, Noppadol
Loading...
41 results
Now showing 1 - 10 of 41
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Automatic exudate extraction for early detection of Diabetic Retinopathy(2013-01-01) ;Sreng, Syna ;Takada, Jun Ichi; ; Diabetic Retinopathy (DR) is the most common cause of blindness in diabetic patients, but early detection and timely treatment can prevent this problem. Exudates have been found to be one of the signs and serious DR anomalies so the proper detection of these lesions and the treatment should be done immediately to prevent loss of vision. The aim of this study is to automatically detect these lesions in fundus images. To achieve this goal, the proposed method first preprocesses to improve the quality of fundus image, and then Optic Disc (OD) is detected and eliminated to prevent the interference to the result of exudate detection by combination of 3 methods; image binarization, Region Of Interest (ROI) based segmentation and Morphological Reconstruction (MR). Next, exudates are detected by applying the maximum entropy thresholding to filter out the bright pixels from the result of OD region eliminated. Since the result contains some noises which appear as bright light at the edge of fundus area in some images, that affect is considered and eliminated to improve the result of false positive. Finally, exudates are extracted by using MR. The proposed technique has been tested on 100 fundus images from hospital. Experimental results show that 91 % of exudate is extracted correctly with the average process of 3.92 second per image. © 2013 IEEE. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Automated microaneurysms detection in fundus images using image segmentation(2017-04-19) ;Sreng, Syna; Hamamoto, KazuhikoDiabetic retinopathy is one of the complicated diseases which occurs in diabetic patients when the affects damage the retina. The eyes vision can lead to be lost in case of late treatment. Microaneurysms are the earliest detectable abnormalities of diabetic retinopathy, so the automated detection of the lesions is essential and useful task. This paper proposed a simple method to detect microaneurysms based on its characteristics in fundus images using some techniques in image segmentation. First, we preprocessed to reduce image noise and improve the contrast. Then we segmented them using Canny edges detection and maximum entropy thresholding. The characteristics of microaneurysms which appear as small red dots and circular shape are the specific points to discriminate them from the other lesions as well as the anatomical structures of the fundus image by applying area and eccentricity methods. Finally, the morphological operation was applied to mark out these symptoms. The results were analysis by ophthalmologist in order to define system accuracy and preciseness. According to results of comparison, we found that the accuracy is 90 % and the average processing time is 9.53 seconds per image. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Banana Plant Nutrient Deficiencies Identification using Deep Learning(2023-01-01) ;Han, Kadipa Aung Myo; ; Hamamoto, KazuhikoThis paper presents nutrient deficiency multi-class classification in banana plant data sets using a deep convolutional neural network. In this paper, healthy and eight nutrient deficiency classes were studied. The performance was evaluated in different situations of two public data sets. The proposed method can provide sensitivity and specificity in Raw Images, Raw Images with combination, Augmented Images, and Augmented Images with the combination. Furthermore, nearly 88% of the F1-score was outperformed. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, The Polarization and Depolarization Current Characteristics of Natural Ester Stressed by Partial Discharge(2020-10-25); ;Makmork, Kawee ;Kittikhuntharadol, Yannaphol ;Suksai, NattapatChusang, ThanapatThis paper represents the polarization and depolarization current (PDC) of the natural ester stressed by partial discharge (PD). The needle-plane electrode was used to simulate corona discharge in natural ester. Besides, the needle electrode as a high voltage electrode placed on the 8 hours natural ester impregnated pressboards and the plane electrode as a grounded electrode were used to simulate the surface discharge. To simulate the internal discharge, the plane-plane electrode inserted with various condition impregnated pressboards were experimented. PD phenomena were simulated in the natural ester container for 1, 3, and 6 months. Then the PD-stressed natural ester was used as the liquid specimen for polarization and depolarization current measurement. It was found that the PDC characteristics of natural ester undergone with various PD types were obviously different. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Manufacturing Process Improvement by Barcode Reader using Image Processing(2024-01-01) ;Sukasem, Sutikamon; ;Thudthong, Jakkrit ;Wongsomboon, ChanathipYajima, KuniakiManufacturing industries get perspective on the efficiency of their production process. This study focuses on improving the cycle time of the work process at the station related to barcode reading. This operation should be of minimal duration to result in shorter cycle times and resulting in increased production volumes while still maintaining quality and reducing production costs. Image processing methodology is applied to reading barcodes instead of using a barcode reader which creates clear image quality along with developing an application using Android Bridge (ABD) and ZXing libraries that can read 1D barcodes in many formats. More essentially, application development by multithreading programming can process barcode reading simultaneously at a time that meets the target cycle time. The result of this study proves that the process of reading barcodes by human work has taken 60 times per job cycle and the reading time was about 29 seconds, becoming reduced to 19.85 seconds, manpower can be reduced by 1 person and production cost as well. Moreover, this implementation eliminates human errors that are likely to occur from scanning barcodes in the wrong position. Therefore, this study has benefited the manufacturing industry achieve significantly increased productivity and efficiency. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Routing algorithms with adaptive weight function based on total wavelengths and expected available wavelengths in optical WDM networks(2005-01-01); ; Varakulsiripunth, RuttikornThis paper studies routing and wavelength assignment in wavelength-routed (WR) optical WDM networks which are circuit-switched in nature. When a session request is given, (be hard task of routing and wavelength assignment (RWA) is to calculate the satisfiable path between two nodes, and also to assign an available set of wavelengths along this path. Therefore, we have proposed a new routing and wavelength assignment algorithm, called Total wavelengths and Expected available wavelengths (TEW) algorithm in order to achieve the effective routing and wavelength assignment that can guarantee the service for user's requirement. The link weight function is considered as the main factor for route selection in TEW algorithm. This function is calculated by using a determination factor of the number of wavelengths that are being used currently and are supposed to be available after a certain time. The session requests from users will be routed on the links that has the least number of link weights by using Dijkstra's shortest path algorithm. This means that the selected lightpath will have the minimum utilization and maximum expected available wavelengths. The impact of proposed link weight computing function on the blocking probability is investigated by means of computer simulation and comparing with the traditional mechanism. The results show that the proposed TEW algorithm can achieve better performance in terms of the blocking probability. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Apply PLC to Control 3-Axis Machines(2025-01-01); ;Thaiyai, In; This report presents a method of using PLC (Programable Logic Control) to control the work instead of the 3-Axis machine position controller. PLC is popularly used in various types of control systems. It has a lot of control capabilities, is efficient, stable, durable, easy to use, and cheap. It is the use of commands to control the work of all 3 axes, 2 axes, and 1 axle. The commands used for moving in both straight lines and curves, and there are other devices that need to be controlled together with the machine that is being controlled. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Fully Digital Cosine Signal Driven Pulse Oximeter Without Bandpass Filter Based on Microcontroller(2022-04-20) ;Kainan, Pattana ;Wiriyatanachit, Supatsara ;Rungkrae, Manussawee; In this research, almost fully digital microcontroller pulse oximeter processing by two frequencies of cosine wave-driven red and infrared light sources as well as direct recovering photoplethysmography (PPG) signals from FDM signal without bandpass filter with coherent amplitude demodulation is proposed. An ESP32 microcontroller is employed to generate two cosine waves with two difference equation algorithms instead of using the function of cosine from Arduino or C library language. Two frequency digital cosine wave signals are generated and converted to analog signals with D/A to drive two light sources while two digital cosine signals as mentioned above are recognized in order to use to be as two local oscillator cosine wave signals for recovery of two PPG signals with synchronous demodulation. The RED and IR PPG signals are later used to estimate blood oxygen saturation (SpO2). The experimental result shows that it works well with accuracy and precision of 99.4448% and 0.5551, respectively. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Suitable Supervised Machine Learning Techniques for Malignant Mesothelioma Diagnosis(2019-01-10) ;Win, Khin Yadanar; ;Choomchuay, Somsak ;Sreng, SynaHamamoto, KazuhikoMalignant Mesothelioma (MM) is a rare, aggressive cancer that grows in the lining of the internal organs such as lung, abdomen or heart. Fousing on MM diagnosis, in this paper, we investigate multiple machine learning methods and compare for accurate MM diagnosis results. Seven machine learning algorithms namely (i) Linear Discriminant Analysis (LDA), (ii) Naïve Bayes, (iii) K Nearest Neighborhood (KNN), (iv) Support Vector Machine (SVM), (v) Decision Tree (DT), (vi) Logistic Regression (LogR) and (vii) Random forest (RF) algorithms are exploited. The experiments dataset containing 324 cases with 34 features and six performance measures are used to assess the accuracy of evaluated classifiers. The average accuracy of LDA, NB, KNN, SVM, DT, LogR and RF are 61.73%, 67.90%, 91.36%, 100%, 100%, 100% and 100%, respectively. In addition, the computational complexity of each method is also analyzed. Each algoritm is judged based on its classification accuracy and computational complexity. It is found that SVM, DT, LogR and RF outperform the others and even previous studies. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, A cleaning robot for solar panels(2019-07-01) ;Ronnaronglit, NawatMany types of Solar Panel Cleaning Robots are used in many countries, such as Solar Frames Connected Robot. Developing the Solar Panel Cleaning Robots can be used to work instead human especially it is not necessary to have a supervisor for working control and reduce a risk of damage from moving a robot. However, Solar Frames Connected Robot still has defect which limited size of solar panel and not easy to move. This research aims to design and develop the Solar Panel Cleaning Robots by studying Solar Panel Cleaning Robots movement which work suitable in Thailand, Wireless Joystick, Sensor Sonar using Gear Motor and ARDUINO microcontroller. The robot will clean a solar cell by using a rotary brush with water spray to improve cleaning system. Result of studying Solar Panel Cleaning Robots movement by using Gear Motor can operate at a surface level of 0-30 degrees Celsius and cleaning system by using rotary brush can be clean 80% of solar panel.
