Chodkaveekityada, Peeramed

Preferred name

Alternative Name

Chodkaveekityada, P.

Main Affiliation

School of Engineering

peeramed.ch@kmitl.ac.th

Now showing 1 - 10 of 13

Some of the metrics are blocked by your
consent settings
Time correlation used to improve time diversity gain of rainfall prediction
(2018-01-01)
Chodkaveekityada, Peeramed
;
Fukuchi, Hajime
Correlation of the rainfall rate with time depends on geography, environment, and the type of rainfall. In this letter, we consider the use of such a correlation to improve the time diversity gain of a system that predicts rainfall over Japan. From a rain may with 4 years of data, we selected 43 locations throughout mainland Japan, and from these data, we derived the cumulative time percentage, the diversity gain from a time diversity method using 10 to 120 min delays, and the correlation from a time series of rainfall. This information is used to improve the prediction of rainfall. Root-mean-square errors show an improvement in the diversity gain.
Some of the metrics are blocked by your
consent settings
Discrete Time Two-Frequency Shift Keying
(2024-01-01)
Wardkein, Paramote
;
Kaew-In, Chanapat
;
Wanprasert, Thanaree
;
Philuek, Pandaree
;
Moonthongnoi, Nateekan
In this article, two-frequency shift keying is used to modify the time for generating the Time-Frequency Shift Keying (TFSK). Which both frequencies occupy different times and vary with a message. For this mechanism, it causes M-ary time-frequency pattern coding, where one pattern can code n bits if we have different 2n patterns, which overall code like a Pulse Width Modulation (PWM) combined with binary FSK. To confirm the proposed idea or technique, four-time-frequency coding is simulated with MATLAB, and an experiment is implemented with a commercial FSK IC. Both simulations and experimental results show that they are identical to predictions. Moreover, its bandwidth is predicted, and clock recovery is also implemented.
Some of the metrics are blocked by your
consent settings
Direction dependence factor in site diversity design for Kanto area, Japan
(2017-01-01)
Chodkaveekityada, P.
;
Fukuchi, H.
Site diversity method has been used to mitigate the effect of rain attenuation since the beginning of satellite communication era. A distance in site diversity method is designed as short as possible to avoid the effect of rain attenuation at the same time. To achieve more accuracy and reliability in the site diversity design, we propose the spatial correlation factor evaluated from rain gauge network in Kanto area, Japan. The spatial correlation results show that the direction dependent factor should be taken into account in the site diversity gain formula.
Some of the metrics are blocked by your
consent settings
A Cyclic Shift Chirp Modulation Scheme for Analog Message with Simplified PPM Demodulation
(2026-01-01)
Kaew-In, Chanapat
;
Wardkein, Paramote
;
Chatchaiphat, Nisukan
;
Chodkaveekityada, Peeramed
In this work, a cyclic shift chirp modulation scheme with an analog message signal is presented. The demodulation process is carried out by converting the cyclic shift chirp into pulse position modulation (PPM), followed by three demodulation approaches: (i) direct LPF filtering of the PPM pulses, (ii) inversion of the PPM pulses prior to LPF filtering, and (iii) integration driven by the PPM pulses. The recovered signal in these cases corresponds to the differentiated form of the original message signal. However, when the message signal is preintegrated before PPM modulation, the subsequent demodulation via integration directly yields the original message signal, eliminating the need for an additional integration stage at the receiver. This results in a simplified and less complex receiver compared to conventional PPM schemes without input pre-integration. Analytical and experimental results are in close agreement, validating the effectiveness of the proposed method.
Some of the metrics are blocked by your
consent settings
Design and development of a high-and-low-altitude air observation system for rainmaking process in Thailand
(2019-06-01)
Chodkaveekityada, P.
;
Wardkein, P.
Thailand has been known as a top agricultural exporter in the world. But in every year, we miss a lot of opportunities to export some agricultural products due to drought condition. In the years 2017 and 2018, the areas in risk of a drought crisis were 47 areas throughout the whole country amounting to around 1.5 million acres. There was not enough water to grow plants in these areas. As a matter of fact, Thailand is located near the equator which has more cumulative rainfall volume than any other areas in the world. Still, drought crisis happens every year. One of the reasons behind this may be lack of valid predictive information. Weather information is very important for an agricultural country. Thailand has not invested sufficiently in building an effective weather sensor network. A compromise has been made by employing high technology to produce rain in specific areas instead to alleviate drought crisis. This work was a design and development of a high-and-low-altitude air observation system suitable for rainmaking process in Thailand that aimed to reduce the import of advanced and expensive technology.
Some of the metrics are blocked by your
consent settings
Design and Development of Effective Radiosonde for Rainmaking Process in Thailand
(2018-07-02)
Chodkaveekityada, Peeramed
;
Wardkein, Paramote
Weather information is very useful to many activities in every country such as aeronautical, meteorological and rainmaking. Thailand is located near the equator that makes the weather in this region vary a lot and more severe than in another areas. Thailand also exports a lot of agricultural products to serve people globally. Oftentimes, rain does not fall on an intended area like an area round a dam, hence there is not enough water to provide to farmers. This work is a part of a goal to design and develop a weather observation system suitable for rainmaking in Thailand.
Some of the metrics are blocked by your
consent settings
IoT Modular Gateway Development for Multi-Standard Compatibility
(2025-01-01)
Kaiyarach, Kattiya
;
Taprik, Sopita
;
Buathong, Bantita
;
Chodkaveekityada, Peeramed
Currently, IoT wireless communication technology plays a crucial role in connecting multiple devices. However, the diverse standards used limit their interoperability. To address the issue of incompatible communication protocols, this research presents a developed IoT system that seamlessly integrates various communication standards. The system comprises a central processing unit (Core Board) that functions as an IoT gateway. This core board connects local networks via LoRa and others, as well as public networks using 3G and Wi-Fi. The system utilizes the STM32H563ZI processor, which is based on the ARM Cortex M33 architecture. Additionally, it features expansion slots to accommodate future of others communication standards. The results show that the developed IoT system's effective support for a diverse range communication standards.
Some of the metrics are blocked by your
consent settings
Comparison of spatial correlation between Japan and Thailand
(2017-12-19)
Chodkaveekityada, Peeramed
Site diversity is the one technique that has been used to reduce the rain attenuation effect for long time ago. Since the past, we just located the site diversity far away from the main site and thought that can be completely reduced the rainfall effect, but it does not. To improve this idea, in this paper, we propose another factor as call spatial correlation in order to design the location of site diversity more accuracy. We evaluate the spatial correlation for Japan and Thailand to confirm that the spatial correlation is totally different in each area and we should include this factor into the site diversity gain formula.
Some of the metrics are blocked by your
consent settings
Preliminary Analysis of the Impact of Rain Attenuation Around Reference Ground Station Using One-Minute Rainfall Data
(2025-01-01)
Supasirasatkul, Thanyaporn
;
Chodkaveekityada, Peeramed
The current rapid and severe climate change is affecting rainfall patterns in terms of both intensity and frequency. This can have a significant impact on satellite communications, especially in high-frequency bands such as Ku-band. This research presents an analysis of rain attenuation effects, using KMITL as a reference station and rainfall data from surrounding stations collected at one-minute intervals over two years. The standard ITU-R model was used to calculate rain attenuation. The results show variations in attenuation among different stations, enabling analysis of rainfall amount, distance, and direction. This study can contribute to the development of a rain attenuation model for Thailand.
Some of the metrics are blocked by your
consent settings
Cansat design and their applications
(2018-01-01)
Piatong, Atiwat
;
Sirisestanun, Aonjira
;
Chiangchin, Supachai
;
Apisakulroj, Suwijak
;
Suwat, Witsanu
CanSat is a simulation model used in actual satellite working in the space. It has been presented for almost 20 years. The development of CanSat is based on educational proposes, and its design can be multiple depending on associated educational attainments [1]-[2]. Most developed countries give priority to develop the literacy of space technology in their students since secondary school in which the CanSat design is utilized as one tool to acquire the understanding of the satellite operation. The main objective of this paper is to design the CanSat for competition in 2018. The mission of the competition has been changing over the year to challenge competitors in the field of space engineering. Normally, base requirements may limit certain design factors such as the total mass of the CanSat, the rate of transmission once per second, the use of XBEE for telemetry at 2.4 GHz or 900 MHz and the cost of the CanSat that should be under 1000 USD. However, the competitors are allowed to design other attributes of the CanSat to achieve a competent one. The body of the proposed CanSat will consist of sensors subsystem and power subsystem. We will choose appropriate sensors by considering the cost and main features of our design. Basically, sensors for satellite used to collect data relevant to its surrounding environment and our sensor subsystem consists of a temperature sensor, a humidity sensor, a pressure sensor, an altitude sensor, a GPS sensor, a magnetometer sensor and an additional camera module. Some sensors are integrated as one component to make the CanSat more lightweight and cost effective. Regarding the feature of a CanSat for collecting environment data which is very useful to apply for the weather observation system, we will develop a CanSat to operate similarly to a radiosonde. Hopefully, it can be used as a smart radiosonde for the rainmaking project in our country.

Chodkaveekityada, Peeramed

Filters

Settings

Sort By

Results per page