Eiad-Ua, Apiluck
Loading...
Preferred name
Eiad-Ua, Apiluck
Alternative Name
Eiad-ua, Apiluck
Eiad-Ua, A.
Eiadua, A.
Main Affiliation
Email
apiluck.ei@kmitl.ac.th
12 results
Now showing 1 - 10 of 12
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Solid shrimp waste derived nanoporous carbon as an alternative bio-sorbent for oxytetracycline removal from aquaculture wastewater(2024-06-15); Manatura, KanitRecently, it has been critical to effectively remove oxytetracycline (OTC) from aquaculture wastewater before releasing into the environment. The adsorption process is recognized as an efficient pathway for removing OTC since it is a simple, stable, and cost-effective method. This study aims to develop nanoporous carbon entirely from shrimp waste (SW) via hydrothermal carbonization assisted with KOH activation. Existing KOH significantly increases the porosity of SW nanoporous carbon. The optimal SW porous carbon was obtained using 5 wt%KOH for activation, which had the largest surface area of 679.51 m<sup>2</sup>/g with the total pore volume of 0.458 cm<sup>3</sup>/g. Moreover, the SW porous carbon with the highest porosity was selected for the OTC adsorption. The Langmuir isotherm model and the pseudo-second-order kinetic model match the experimental data, implying that the adsorption mechanism is mono-layered adsorption due to micropores by chemisorption interaction. The adsorption capacity significantly improved by increasing the dosage of SW nanoporous carbon. The SW nanoporous carbon adsorption for OTC is primarily regulated by pore filling affected by hydrogen bonding, and π-π* interaction also plays a significant role. The SW nanoporous carbon showed an efficient OTC adsorption after 5 regeneration cycles. This work demonstrates biomass waste recycling and emphasizes the potential of aquatic food processing waste-derived nanoporous carbon for antibiotic adsorption. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Nanoporous Carbon from Water Hyacinth Via Hydrothermal Carbonization(2020-07-30); Fuji, MasayoshiNanoporous carbon materials have been successfully synthesized from water hyacinth via hydrothermal carbonization (HTC). This research was studied the effect of hydrothermal temperature from 160 - 200 C and reaction time for 4 - 24 h. Afterwards, carbonization was carried out at the temperature of 600 - 900 C for 2 h in N2 atmosphere for developing porosity and even removing contaminants of hydrothermal char to obtain the porous carbon. The physico-chemical properties of nanoporous carbon materials were comprehensively characterized through Scanning electron microscope (SEM), Fourier transforms infrared spectroscopy (FT-IR), CHN elemental analysis, X-ray diffraction (XRD) and BET analysis. The adsorption capacity and carbon content of nanoporous carbon materials from water hyacinth were increased with increased hydrothermal carbonization temperature and time. Performing HTC at 200 C for 12 h. Is the optimum condition to synthesis of precursor materials for good adsorbent. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Oil palm leaf-derived nanoporous carbon via hydrothermal carbonization combined with NaOH microwave activation for tetracycline adsorption(2025-11-01); Generally, the increase in pharmaceutical industrial activities has led to a corresponding rise in water resource contamination. Efforts have been dedicated to addressing the urgent challenge of waste biomass disposal by developing recycling methods capable of producing bio-adsorbents. Adsorption is a promising approach for removing tetracycline contaminants, owing to its simplicity, stability, and cost-effectiveness. In this study, a low-cost activated biochar was successfully developed using oil palm leaf (OPL) via hydrothermal carbonization (HTC) combined microwave-assisted pyrolysis system (MAPS) using sodium hydroxide (NaOH). The HTC and MAPS processes enhanced high mass yield, porosity, energy efficiency, and reduced reaction time. NaOH treatment improved the porosity of the activated biochar derived from OPL, resulting primarily in a mesoporous structure. However, NaOH treatment via the MAPS process increased surface area and porosity. Among the samples tested, OPLC-NaOH-1:1 exhibited the largest surface area and highest porosity, making it the chosen candidate for further TC adsorption tests. The adsorption experiments revealed that the Langmuir isotherm model and the pseudo-second-order kinetic model accurately matched the experimental data, suggesting a mono-layered adsorption mechanism due to micropores and chemisorption interactions. Additionally, thermodynamic analysis indicated an endothermic and spontaneous reaction during the adsorption process. The adsorption of nanoporous carbon for TC was primarily regulated by pore filling, hydrogen bonding, electrostatic effects, and π-π interactions also playing a significant role. Overall, this study highlights the potential of utilizing OPL waste as a sustainable material for producing nanoporous carbon and underscores the effectiveness of nanoporous carbon for adsorbing antibiotics. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Valorization of horse manure conversion to magnetic carbon nanofiber for dye adsorption by hydrothermal treatment coupled with carbonization(2024-06-01) - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Highly porous carbon materials for adsorbent from water hyacinth via hydrothermal carbonization(2020-10-26); Fuji, MasayoshiCarbon nanoparticles have been successfully synthesized from waste lignin via carbonization and base activation. The effect of base activation on lignin transformation to carbon nanoparticles was investigated. Carbon nanoparticles from waste lignin via carbonization and base activation were denoted as CNPs. The physicochemical properties of CNPs were comprehensively characterized through a Scanning electron microscope (SEM), X-ray diffraction (XRD), and Raman spectroscopy. The results revealed that the condition using 5 wt% of sodium hydroxide (NaOH) and carbonization at 700°C on N2 atmosphere exhibited the highly porous structure of carbon nanoparticles. In conclusion, the NaOH-treated CNPs led to the production of high specific surface areas and high micropore volumes. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Synthesis of nanoporous carbon from brewer waste by hydrothermal carbonization assisted chemical activation for carbamazepine adsorption(2024-06-01); Nanoporous carbon (NPC) has gained significant attention in wastewater treatment due to its effectiveness. The adsorption process, known for its simplicity, stability, and cost-effectiveness, is widely recognized as an efficient method for removing carbamazepine (CBZ) residues accumulate in the environment. However, the application of NPC is often hindered by challenges in the regeneration process after use, as well as issues related to large surface area, pore size, and functional groups. Fortunately, the samples in this study not only maintained their adsorption efficiency but also demonstrated the ability to be regenerated multiple times. Herein brewery waste was subjected to hydrothermal treatment at 200 °C for 1 h and followed by KOH and NaCl activation with different KOH:NaCl (w/w) ratios of 5:0, 4:1, 3:2, 1:1, 2:3, 1:4, and 0:5 to optimize the properties of malt husk derived nanoporous carbon (NPC). The optimal condition KOH:NaCl ratio of 1:1 had a maximum specific surface area of 906 m<sup>2</sup>/g with a total pore volume of 0.252 cm<sup>3</sup>/g. According to the adsorption test, the CBZ adsorption isotherm was well-fitted to the Langmuir model (R<sup>2</sup> = 0.976) kinetic data were consistent with the pseudo-second-order model (R<sup>2</sup> = 0.995). This suggests that the adsorption mechanism involves monolayer adsorption and chemisorption interaction. The Gibbs free energy and enthalpy of CBZ adsorption by NPC were found to be spontaneous and endothermic. The regeneration test revealed a 95.35% decrease in the adsorption capacity of NPC after 5 repeated cycles. Consequently, the study suggests a potential application of nanoporous carbon from MH as an alternative adsorbent for removing carbamazepine in wastewater. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Optimization of hydrothermal carbonization of Rhizoclonium riparium macroalgae using response surface methodology for high-performance solid biofuel production(2026-01-01) - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Nanoporous Carbon from Oil Palm Leaves via Hydrothermal Carbonization-Combined KOH Activation for Paraquat Removal(2022-08-01); ; In this study, nano-porous carbon was completely obtained from oil palm leaves (OPL) by hydrothermal pretreatment with chemical activation, using potassium hydroxide (KOH) as an activating agent. Potassium hydroxide was varied, with different ratios of 1:0.25, 1:1, and 1:4 (C: KOH; w/w) during activation. The physical morphology of nano-porous carbon has a spongy, sponge-like structure indicating an increase in specific surface area and porosity with the increasing amount of KOH activating agent. The highest specific surface area of OPL nano-porous carbon is approximately 1685 m<sup>2</sup>·g<sup>−1</sup>, with a total pore volume of 0.907 cm<sup>3</sup>·g<sup>−1</sup>. Moreover, the OPL nano-porous carbon significantly showed a mesoporous structure designed specifically to remove water pollutants. The adsorptive behavior of OPL nano-porous carbon was quantified by using paraquat as the target pollutant. The equilibrium analyzes were explained by the Langmuir model isotherm and pseudo-second-order kinetics. The maximum efficiency of paraquat removal in wastewater was 79%, at a paraquat concentration of 400 mg·L<sup>−1</sup>, for 10 min in the adsorption experiment. The results of this work demonstrated the practical application of nano-porous carbon derived from oil palm leaves as an alternative adsorbent for removing paraquat and other organic matter in wastewater. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Nanoporous Carbon from Water Hyacinth via Hydrothermal Carbonization assisted Chemical Activation for Dye adsorption(2022-07-01) - Some of the metrics are blocked by yourconsent settings
Item type:Publication, NiO-YSZ anode composite material derived from mechano-chemical for solid oxide fuel cells application(2025-06-01)