Now showing 1 - 2 of 2
  • Some of the metrics are blocked by your 
    Item type:Publication,
    Electronically Tunable TISO Voltage-Mode Universal Filter Using Two LT1228s
    (2022-01-01)
    Wai, May Phu Pwint
    ;
    ; ; ;
    This study aims to design an electronically tunable voltage-mode (VM) universal filter utilizing commercially available LT1228 integrated circuits (ICs) with three-input and single-output (TISO) configuration. With the procedure based on two integrator loop filtering structures, the proposed filter consists of two LT1228s, four resistors, and two grounded capacitors. It realizes five filter output responses: low-pass, all-pass, band-reject, band-pass, and high-pass functions. By selecting input voltage signals, each output responses can be achieved without changing the circuit architecture. The natural angular frequency can be controlled electronically. The input voltage nodes Vin1 and Vin3 possess high impedance. The output node has low impedance, so it can be cascaded to other circuits. The performance of the proposed filter is corroborated by PSpice simulation and hardware implementation which support the theoretical assumptions. The result shows that the range of total harmonic distortion (THD) is lower than 1%, and that the higher the temperature is, the lower the natural angular frequency is.
  • Some of the metrics are blocked by your 
    Item type:Publication,
    Synthesis of biquad filters using two VD-DIBAs with independent control of quality factor and natural frequency
    (2021-04-01) ; ;
    Khateb, Fabian
    ;
    Sotner, Roman
    ;
    Silapan, Phamorn
    This contribution presents the procedure to synthesis the voltage-mode active biquad filters using the active elements, voltage differencing differential input buffered amplifier (VD-DIBA). Two filtering categories, single input four output (SIFO) configuration and three input three output (TITO) configuration are proposed. Both proposed filters consist of two VD-DIBAs, two grounded capacitors and two resistors. All input voltage nodes for both biquad filters exhibit high impedance. The proposed SIFO biquad filter simultaneously provide four filtering responses, low pass (LP), band pass (BP), high pass (HP) and band reject (BR) functions, while the proposed TITO filter provides five filtering responses (including all pass (AP) function). The natural frequency (ω<inf>0</inf>) is linearly and electronically tuned without affecting the quality factor (Q). Also, the Q adjusting can be done without affecting the ω<inf>0</inf>. By modifying the proposed TITO biquad filter, the current controlled sinusoidal oscillator is achieved. The frequency of the generated sinewave is linearly tuned without affecting the condition of oscillation. The performances of the proposed circuits are simulated by Cadence software and the Spectre simulator of the Analog Design Environment using CMOS VD-DIBA in 0.18 μm TSMC CMOS technology and laboratory experiment using VD-DIBA constructed from commercially available ICs.