Teerasong, Saowapak

Now showing 1 - 3 of 3

Some of the metrics are blocked by your
consent settings
Smartphone-based disposable cotton-swab sensor loaded with creatinine/Cu–chlorophyllin–stabilized AuNPs for ultrasensitive RGB colorimetric detection of mercury (II) ions in aquatic environments
(2026-05-01)
Lerdpiriyaskulkij, Natee
;
Detsri, Ekarat
;
Teerasong, Saowapak
;
Chansai, Sarayute
;
Mathaweesansurn, Arjnarong
A simple, rapid, selective, and sensitive colorimetric sensor based on a disposable cotton swab loaded with Au nanoparticle–modified Cu-chlorophyllin (Au0–NPs<inf>CHL</inf>) and creatinine was developed for mercury (II) detection in aquatic environments using smartphone–based RGB analysis. Au0–NPs<inf>CHL</inf> were synthesized by ultrasonic-assisted chemical reduction, employing Cu-chlorophyllin as a stabilizing and NaBH<inf>4</inf> as a reducing agent. A vivid red Au0–NPs<inf>CHL</inf> colloidal (7.96 ± 0.29 nm) with a sharp SPR peak at 515 nm was successfully obtained. An aliquot of 75 µL of Au0-NPs<inf>CHL</inf> (0.103 ± 0.03 nmol L−1) and 25 µL of creatinine solution (40 mg L−1) were sequentially loaded into an 8.0 × 0.5 cm cotton swab, separated by a 0.5 cm air gap. Detection began by immersing the swab into Hg2+–contaminated samples for 3 min, allowing Hg2+ adsorption. Breaking the swab generated pressure differential, which, along with gravity, drove the Au0–NPs<inf>CHL</inf> to mix with creatinine. The resulting mixture migrated toward the swab tip by capillary action and reacted with adsorbed Hg2+ through metallophilic 5d10–5d10 interactions. Creatinine acted as a bridging ligand, inducing Au0–NPs<inf>CHL</inf> aggregation and shifting the SPR to 620 nm, causing a visible red-to-blue transition. This sensor enables rapid and visual detection and quantitative evaluation via smartphone RGB analysis. The system demonstrated excellent linearity from 1 to 100 µg L−1 with a low LOD of 0.82 µg L−1. Recoveries of 97.6–101.8 % confirmed high accuracy and minimal matrix interference. The disposable cotton swab RGB sensor provides a rapid, portable, and practical tool for on-site primary assessment of Hg2+ contamination in environmental samples.
Some of the metrics are blocked by your
consent settings
Supramolecular electrochemical detection of bisphenol A using a melamine-functionalized reduced graphene oxide modified screen-printed electrode
(2026-06-01)
Thammaso, Supinya
;
Kamsong, Wichayaporn
;
Karuwan, Chanpen
;
Saetear, Phoonthawee
;
Detsri, Ekarat
Detection of bisphenol A (BPA), an endocrine disruptor, requires rapid and reliable methods to ensure water safety. In the current work, we present a supramolecular electrochemical sensor based on a melamine-immobilized reduced graphene oxide-modified screen-printed carbon electrode (Mel-rGO SPE) for the determination of BPA. The sensing design exploits dual supramolecular interactions: hydrogen bonding between melamine's amine groups and BPA's hydroxyl moieties, and π–π stacking between their aromatic rings. While rGO significantly enhances electron transfer, these synergistic effects improve device sensitivity. A Mel-rGO SPE was fabricated using an ink-mixing approach to produce a uniform and robust sensor. BPA detection was performed using cyclic voltammetry, and the anodic peak potential was 0.32 V. The current response provided a good correlation with BPA concentrations in the range of 1–250 μM. The detection limit was low, 0.23 μM. The Mel-rGO SPE was successfully applied to determine BPA in polycarbonate bottled water. These promising results indicate that the developed sensor is an alternative device for rapid screening of BPA contamination of water samples.
Some of the metrics are blocked by your
consent settings
Smartphone RGB camera-based colorimetric platform with double-layer spherical Ca (II)-alginate/ZnONPs hydrogel liquid-core curcumin emulsion for rapid and selective detection of pyridoxine (Vitamin B6) in functional beverages
(2025-08-01)
Chinnawat, Sirinyakorn
;
Detsri, Ekarat
;
Lerdpiriyaskulkij, Natee
;
Teerasong, Saowapak
;
Mathaweesansurn, Arjnarong
A portable smartphone-based RGB colorimetric sensor was developed for the quantitative detection of pyridoxine (vitamin B6, VB-6) in functional beverages, employing a novel core–shell hydrogel probe (CUR<inf>Hydrogel</inf>), engineered with a calcium alginate matrix encapsulating a liquid-phase curcumin emulsion and externally layered by poly(diallyl dimethyl ammonium chloride)-functionalized ZnO nanoparticles (ZnONPs/PDADMAC). The CUR<inf>Hydrogel</inf> spheres were fabricated via a molecular self-assembly reverse spherification and demonstrated high mechanical stability (stiffness: 6.45 × 104 N/m, compressive strength: 1.01 × 106 N/m2) along with excellent UV-blocking photostability for up to 28 days. The CUR<inf>Hydrogel</inf> probe was applied for detecting VB-6 via a smartphone-based sensing platform. The colorimetric assay was based on a two-step strategy involving initially the formation of the colorless pyridoxine-boron complex by VB-6 and boric acid, after which the remaining boric acid binds with curcumin to produce a red rosocyanine dye. A higher VB-6 concentration yields less rosocyanine and a discernible color shift from orange to yellow, which is quantified via smartphone RGB analysis. The RGB values were assessed via a smartphone application, providing the linearity of VB-6 detection of 10–125 mg L−1 with LOD and LOQ of 2.93 mg L−1 and 9.77 mg L−1. The CUR<inf>Hydrogel</inf> exhibited excellent precision with relative standard deviations (RSDs) ranging from 0.20 to 0.27 %, while recoveries ranged from 99.84 % to 103.03 %. Particularly, the results of this method were also validated by comparing with HPLC and UV–vis spectrophotometry. The smartphone RGB camera-based colorimetric sensor of CUR<inf>Hydrogel</inf> has great potential application prospects for detecting VB-6 in functional beverage samples.

Teerasong, Saowapak

Filters

Settings

Sort By

Results per page