Suwanjan, Peerawut

Loading...
Thumbnail Image
Preferred name
Suwanjan, Peerawut
Main Affiliation
Email
peerawut.su@kmitl.ac.th

Settings

Now showing 1 - 2 of 2
  • Loading...
    Thumbnail Image
    Some of the metrics are blocked by your 
    consent settings
    Item type:Publication,
    Single commercially available ic-based electronically controllable voltage-mode first-order multifunction filter with complete standard functions and low output impedance
    (2021-11-01)
    Jaikla, Winai
    ;
    Buakhong, Unchittha
    ;
    Siripongdee, Surapong
    ;
    Khateb, Fabian
    ;
    Sotner, Roman
    This paper presents the design of a voltage-mode three-input single-output multifunction first-order filter employing commercially available LT1228 IC for easy verification of the proposed circuit by laboratory measurements. The proposed filter is very simple, consisting of a single LT1228 as an active device with two resistors and one capacitor. The output voltage node is low impedance, resulting in an easy cascade-ability with other voltage-mode configurations. The proposed filter provides four filter responses: low-pass filter (LP), high-pass filter (HP), inverting all-pass filter (AP−), and non-inverting all-pass filter (AP+) in the same circuit configuration. The selection of output filter responses can be conducted without additional inverting or double gains, which is easy to be controlled by the digital method. The control of pole frequency and phase response can be conducted electronically through the bias current (I<inf>B</inf>). The matching condition during tuning the phase response with constant voltage gain is not required. Moreover, the pass-band voltage gain of the LP and HP functions can be controlled by adjusting the value of resistors without affecting the pole frequency and phase response. Additionally, the phase responses of the AP filters can be selected as both lagging or leading phase responses. The parasitic effects on the filtering performances were also analyzed and studied. The performances of the proposed filter were simulated and experimented with a ±5 V voltage supply. For the AP+ experimental result, the leading phase response for 1 kHz to 1 MHz frequency changed from 180 to 0 degrees. For the AP− experimental result, the lagging phase response for 1 kHz to 1 MHz frequency changed from 0 to −180 degrees. The design of the quadrature oscillator based on the proposed first-order filter is also included as an application example.
  • Loading...
    Thumbnail Image
    Some of the metrics are blocked by your 
    consent settings
    Item type:Publication,
    0.5 V fully differential universal filter based on multiple input OTAs
    (2020-01-01)
    Jaikla, Winai
    ;
    Khateb, Fabian
    ;
    Kumngern, Montree
    ;
    Kulej, Tomasz
    ;
    Ranjan, Rajeev Kumar
    The design of a low-power, low-voltage, fully-differential universal biquad filter is presented in this work, which is constructed from four multiple-input gate-driven operational transconductance amplifiers (MI-OTAs) along with one passive resistor and two passive capacitors. The scheme of presented biquad filter has three high-input impedance voltage nodes and single output voltage node. Five unity gain filtering functions, all-pass (AP), low-pass (LP), band-pass (BP), high-pass (HP) and band-stop (BS) responses, are obtained. The selection of output filtering responses is obtained without the need of component matching condition, inverting or double input voltage. With this feature, it can be easily controlled with digital programming. The quality factor (Q) and angular frequency (ω<inf>0</inf>) are electronically and independently tuned. Moreover, the adjustment of ω<inf>0</inf> and Q can be done without affecting the voltage gain. A workability of the design is confirmed via Cadence software and the Spectre simulator based on the 180 nm TSMC CMOS technology parameters. The proposed fully differential filter operates with 0.5 V supply voltage. The results verify that the proposed filter dissipates the total power of 53.3 nW. Additionally, the dynamic range (DR) of band-pass filtering function is 63 dB for 2% third intermodulation distortion (IMD). Also, the simulated RMS value of the band-pass filtering noise is 45 µV.