Suwanjan, Peerawut
Loading...
Preferred name
Suwanjan, Peerawut
Main Affiliation
Email
peerawut.su@kmitl.ac.th
15 results
Now showing 1 - 10 of 15
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Synthesis of electronically tunable multifunction biquad filter using voltage differencing differential input buffered amplifiers(2025-02-01); ; ; Biquad filters are commonly used in analog circuits for various purposes in signal processing and communication applications. We synthesize an analog active biquad filter with five types of voltage-mode filtering functions. The filter is synthesized using a parallel passive resistor-inductor-capacitor (RLC) network and unity-gain voltage differencing amplifier. A voltage differencing differential input buffered amplifier (VD-DIBA) is the main active component, and the biquad filter has a three-input single-output (TISO) topology. By replacing the passive inductor and resistor with VD-DIBA-based inductance and resistance simulators with a subtractor, the TISO voltage-mode versatile filter is obtained from two VD-DIBAs, one resistor, and two capacitors connected to the ground. The proposed filter can provide five types of voltage-mode filtering functions: inverting bandpass and lowpass responses as well as noninverting band-stop, high-pass, and all-pass responses. The all-pass filter requires no additional active components. The three input voltage nodes have high impedance, and a low-impedance output voltage node facilitates cascade connections without using additional voltage buffers. In addition, the natural frequency and quality factor can be electronically tuned. The quality factor is controlled without disturbing the passband gain and natural frequency. The proposed filter is simulated and verified experimentally in the Personal Simulation Program with Integrated Circuit Emphasis (PSPICE) and through laboratory tests employing VD-DIBAs implemented using commercially available components. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Single Active Element Based Electronically Controllable Capacitance Multiplier(2022-07-15); ; ; The realization of capacitance multiplier using the versatile active building block, namely voltage differencing differential difference amplifier (VDDDA) is presented in this paper. The realized capacitance multiplier is very simple consisting of one VDDDA, one MOS resistor (RM) and one grounded capacitor which is attractive for integration. The multiplication factor (KC) of the realized circuit can be electronically controlled via the bias current (IB) and control voltage (VC) without the need of any matching condition of active and passive element. Moreover, the multiplication factor can be adjusted to be more or less than one. The performances of the presented capacitance multiplier are verified through Pspice simulation using CMOS VDDDA in 0.18μm TSMC technology with ±0.9V power supplies. The multiplication factor is designed to be KC=2 by choosing VC=0.85V, IB=50μA and C=30 pF. The simulated multiplication factor is around 1.98. The simulated operational frequency range is around three decades (6.16 kHz-8.91MHz). The performances of the proposed circuit are also verified by the experiment using VDDDA implemented from the commercial ICs, AD830 and LM13700 with ±5V power supplies. The experiment is conducted under the same multiplication factor (KC=2) as the simulation by choosing RM=0.27 kω (1% passive resistor), IB=96.2μA and C=1nF. The experimental multiplication factor is around 2.06. The experimental operational frequency range is around three decades (1kHz-1.25MHz). By adjusting the bias current from 17.67μA to 400 μA, the experimental multiplication factor is controllable from 11.47 to 0.48. The percent deviation of the theoretical and experimental multiplication factor is lower than 5% when the value of bias current is greater than 39μA. These deviations stem from the effect of the parasitic capacitance and resistance in VDDDA. Moreover, the application example of the presented capacitance multiplier as the sinusoidal oscillator is presented. The performances of the presented oscillator verified via the experiment are well consistent with theoretical anticipation. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Electronically and orthogonally tunable sito voltage-mode multifunction biquad filter using lt1228s(2021-10-27); ; The commercially available IC LT1228 is an interesting active device due to its advantage features, such as a fast transconductance amplifier, a wide bandwidth over a wide range of voltage gain, low total harmonic distortion (THD), high impedance differential input, etc. The single-input triple-output (SITO) voltage-mode (VM) multifunction biquadratic filters using ICs, LT1228s are introduced in this research. This circuit design provides the three-filtering functions, low-pass (LP), high-pass (HP), and band-pass (BP), without changing the circuit architecture. It comprises three LT1228s, four resistors, and two capacitors connected to the ground. The low impedance voltage output nodes are HP and BP responses. The quality factor (Q) and the pole frequency (ω0) can be electronically and orthogonally tuned by altering the third LT1228's bias current (IB). The PSPICE simulation and the experiment are verified to describe the circuit operation. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Single commercially available ic-based electronically controllable voltage-mode first-order multifunction filter with complete standard functions and low output impedance(2021-11-01); ; - Some of the metrics are blocked by yourconsent settings
Item type:Publication, A New Method to Synthesise the Sinusoidal Oscillator Based on Series Negative Resistance-Capacitance and its Implementation Using a Single Commercial IC, LT1228(2023-01-01); ; - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Voltage-Controlled Sinusoidal Oscillator Using Commercially Available ICs with Amplitude Adjustability and Its Application to FM and FSK Modulations for Transmission and Processing of Identified Low-Frequency Signals(2026-04-01); ; ; - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Electronically Tunable TISO Voltage-Mode Universal Filter Using Two LT1228s(2022-01-01); ; ; This study aims to design an electronically tunable voltage-mode (VM) universal filter utilizing commercially available LT1228 integrated circuits (ICs) with three-input and single-output (TISO) configuration. With the procedure based on two integrator loop filtering structures, the proposed filter consists of two LT1228s, four resistors, and two grounded capacitors. It realizes five filter output responses: low-pass, all-pass, band-reject, band-pass, and high-pass functions. By selecting input voltage signals, each output responses can be achieved without changing the circuit architecture. The natural angular frequency can be controlled electronically. The input voltage nodes Vin1 and Vin3 possess high impedance. The output node has low impedance, so it can be cascaded to other circuits. The performance of the proposed filter is corroborated by PSpice simulation and hardware implementation which support the theoretical assumptions. The result shows that the range of total harmonic distortion (THD) is lower than 1%, and that the higher the temperature is, the lower the natural angular frequency is. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Design of Electronically Controllable Multifunction Active Filter with Amplitude Controllability Using Two Commercially Available ICs(2022-01-01); ; In this contribution, the design and analysis of an active multifunction biquad filter that provides five voltage-mode filtering configurations in the same core filtering circuit are presented. The design emphasizes using the commercially available ICs, LT1228, which are easy for off-the-shelf implementation and cheaper compared with the chip implementation. The proposed multifunction filter is realized from two commercial LT1228 ICs as the active function block, combined with five passive elements (three resistors and two capacitors) with three input voltage nodes and a single output voltage node. The following advantages are given for this design: (i) it provides high-pass (HP), low-pass (LP), band-stop (BS), band-pass (BP), and all-pass (AP) filtering functions; (ii) orthogonal and electronic tuning of the natural frequency ω0 and bandwidth (the quality factor: Q); (iii) output voltage node of the proposed circuit is low impedance; (iv) passband voltage gain is controllable; and (v) matching condition and extra double gain voltage-mode amplifier are not required. The effect of the parasitic element in LT1228 on the filter performance is analyzed and included to strengthen the design idea. The PSpice simulation results using LT1228 with ±5 V and the experimental results tested from the hardware implementation are given to prove the validity of the designed multifunction filter. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Voltage-Mode First-order Multifunction Filter with Electronic Controllability Using VDDDA(2025-01-01); ; This study presents the design of a three-input single-output voltage-mode first-order multifunction filter. The proposed filter comprises a single VDDDA as the active component, one grounded capacitor, and two resistors. The output voltage node has low impedance. The proposed filter provides three responses consisting of a low-pass (LP), a highpass (HP), and an all-pass (AP) by setting the voltage signal at the input voltage. The natural frequency (f<inf>0</inf>) and phase response are electronically controlled by the bias current (I<inf>B</inf>). This flexibility allows for precise tuning of the filter characteristics to meet specific application requirements. The passband gain of LP and HP filters can be adjusted using resistors R<inf>1</inf> and R<inf>2</inf> without affecting the f<inf>0</inf> or requiring an additional amplifier. The simulation and experimental results validate the functionality of the proposed filter as anticipated theoretically. This reliability is crucial for communications and signal processing applications, where accurate signal representation is paramount. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, One input voltage and three output voltage universal biquad filters with orthogonal tune of frequency and bandwidth(2021-08-01); ; ; This research paper contributes the one input three output voltage mode universal biquad filters with linear and electronic control of the natural frequency (ω0), using two commercially available ICs, LT1228s as active device with two grounded capacitors, five resistors. The presented universal biquad filters can simultaneously provide three voltage-mode filtering functions, low-pass (LP), high-pass (HP) and band-pass (BP) without changing the circuit architecture. Furthermore, the first presented biquad filter provides low impedance at HP, BP voltage output nodes and LP, BP output voltage nodes are low impedance for the second proposed filter which is easy cascade ability with other voltage mode circuits without the employment of buffer circuits. The quality factor (Q) of both proposed filters is orthogonally adjusted from the passband voltage gain and ω0. The proposed filters are simulated and experimented with commercially accessible ICs, LT1228. The simulated and experimental results demonstrate the filtering performances.