Promvonge, Pongjet

Loading...
Thumbnail Image
Preferred name
Promvonge, Pongjet
Alternative Name
Promvonge, P.
Main Affiliation
Email
pongjet.pr@kmitl.ac.th

Settings

Now showing 1 - 2 of 2
  • Loading...
    Thumbnail Image
    Some of the metrics are blocked by your 
    consent settings
    Item type:Publication,
    Effect of arc-shaped twisted-baffles on augmented heat transfer in a rectangular duct
    (2023-02-01)
    Promvonge, Pongjet
    ;
    Phila, Arnut
    ;
    Chuwattanakul, Varesa
    ;
    Chokphoemphun, Suriya
    ;
    Eiamsa-Ard, Smith
    In this current work, the effect of utilizing arc-shaped twisted-baffles (T-ABs) in a rectangular air channel on thermal performance factor (TPF) has been experimentally studied. In these experiments, the influence of the changes in parameters such as dimensions of pitch ratio (p/w), attached arc-shape angle (α), and Reynolds number (Re) are explored. The comparisons demonstrate that a channel mounted with arc-shaped twisted-baffles yielded considerably greater Nusselt numbers than a smooth channel, possibly attributable to multiple-impinging jets near the channel surface. Heat transfer enhancements of twisted arc-shaped baffles (T-AB) having larger attack angles were superior to those having smaller attack angles. The one with α = 90o offered greater heat transfer rates than the ones with α = 20o, 40o, 60o, and 80o by approximately 8%, 7%, 4%, and 2%, respectively. The superior heat transfer was attributed to the better contact between the working fluid and heat transfer surfaces. In addition, utilizing arc-shaped twisted-baffles with the lowest p/w of 4.0, in a channel produced stronger vortices and multiple impinging jets, which caused better fluid mixing than other p/w. The optimum condition is achieved using T-ABs at an attached arc-shape angle of α = 90o, p/w = 4.0 and Re = 4000, where the heat transfer rate (Nu), friction factor (f) and TPF are found to be, respectively, 3.31, 4.68 and 1.98 times greater than those of a plain channel.
  • Loading...
    Thumbnail Image
    Some of the metrics are blocked by your 
    consent settings
    Item type:Publication,
    Heat transfer distribution and flow characteristics in a channel with perforated-baffles
    (2022-11-01)
    Eiamsa-ard, Smith
    ;
    Sripattanapipat, Somchai
    ;
    Saysroy, Anucha
    ;
    Promvonge, Pongjet
    ;
    Maruyama, Naoki
    The current paper reports the prediction of heat transfer performance of a channel with a modified perforated-baffle in a square wings (SW-PB) form. Numerical results include flow/temperature field, local heat transfer distribution, and thermal performance of a channel installed with the transverse solid baffle (TB), perforated-baffle (PB), and perforated-baffle with square wings (SW-PB). The simulation results demonstrated that TB brought a large recirculation flow, PB induced small recirculation and SW-PB produced several impinging jets as well as recirculation flows. Heat transfer rates given by PB were lower than those provided by TB and SW-PB by around 6.8% and 7.3%, respectively which were accompanied by lower friction losses by about 11.8% and 3.6%, respectively. Although, SW-PB gave higher heat transfer, the assessment of thermal performance factor (TPF) showed that the benefit from lower friction losses was more important. Under the same pumping power, TPFs assisted by SW-PB were higher than that assisted by PB and TB by 6.0% and 3.3%, respectively. The highest TPF of 1.2 was captured by SW-PB at Re = 9,000.