Imorb, Karittha
Loading...
Preferred name
Imorb, Karittha
Alternative Name
Im-orb, Karittha
Im-Orb, Karittha
Im-orb, K.
Main Affiliation
Email
karittha.im@kmitl.ac.th
2 results
Now showing 1 - 2 of 2
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Comparative techno-economic and energy analyses of integrated biorefinery processes of furfural and 5-hydroxymethylfurfural from biomass residue(2023-04-01) ;Wiranarongkorn, K.; ; ;Maréchal, F.Arpornwichanop, A.For efficient feedstock and energy utilization, integrated biorefinery processes are applied to furfural production from bagasse to convert furfural residue into 5-hydroxymethylfurfural (HMF)—an important intermediate building block for the production of various biochemicals. Here, a techno-economic analysis of the integrated processes of furfural and HMF production combined with electricity generation under different scenarios was performed to identify the most suitable process design. Simulations revealed that using the whole bagasse in the biorefinery plant and recycling 50% waste from the HMF production to recover unreacted sugar (scenario 2) achieved the maximum furfural and HMF production with minimum CO<inf>2</inf> emission, compared with integrated processes without sugar recycling (scenario 1), with 80% (scenario 3) and 60% biomass (scenario 4) bypassed to the biorefinery, and with a standalone combined heat and power system (scenario 5). Moreover, heat integration improved the efficiency of biorefinery plant (scenario 2), with an energy recovery potential of 71%, leading to the maximum profit at 11% internal rate of return. However, the high operating cost associated with the requirement of solvents and catalysts for HMF production represents the largest cost distribution in the proposed integrated processes. Sensitivity analysis revealed that solvent cost was the most important parameter for economic benefit. In addition, improving technological efficiency in the pretreatment and HMF production phases can enhance product yield, thereby benefiting the profitability of this process. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Energy analysis and life cycle assessment of furfural and 5-hydroxymethylfurfural integrated biorefinery processes with heat pump-assisted reactive distillation(2025-03-15) ;Wiranarongkorn, Kunlanan; ;Saebea, Dang; Arpornwichanop, AmornchaiBio-based products, such as biochemicals and bioenergy, have received considerable attention in efforts to mitigate the effects of climate change. In this study, an integrated biorefinery process for the production of furfural and 5-hydroxymethylfurfural (HMF) using sugarcane bagasse is proposed. Three process scenarios were compared: the integrated process of HMF and furfural production using (i) conventional reactive distillation (RD), (2) heat pump-assisted RD, and (3) heat pump-assisted RD with heat integration. The comparison focused on energy efficiency and life cycle analysis. The simulation results revealed that the overall energy efficiency of the proposed process could increase by 14.5 % with the additional heat pump to the RD column at a pressure ratio of 1.4 due to a reduction of external energy consumption. This improvement reduced the environmental impact of natural gas combustion for utility production. Specifically, the global warming potential of processes involving heat pump-assisted RD without and with heat integration decreased by 16.66 % and 80.08 %, respectively, compared to conventional RD. These results indicate that incorporating heat pump-assisted RD and implementing effective heat management within the integrated biorefinery process significantly decreased external energy consumption, leading to substantial environmental benefits.
