Sirisomboon, Panmanas

Preferred name

Alternative Name

Sirisomboon, P.

Main Affiliation

School of Engineering

panmanas.si@kmitl.ac.th

Now showing 1 - 10 of 20

Some of the metrics are blocked by your
consent settings
Deep neural networks (DNNs) chemical compositions estimation of fresh durian in-line via near infrared spectroscopy
(2025-06-01)
Posom, Jetsada
;
Saenphon, Chirawan
;
Ditcharoen, Sirirak
;
Pitak, Lakkana
;
Sirisomboon, Panmanas
Near infrared (NIR) spectroscopy and deep neural network (DNN) models were adopted for evaluating the nutritional compositions in durian pulp. The quality inspection of durians through online channels remains challenging because consumers cannot directly touch or smell the fruit. This leads to issues with substandard durians, such as unripe ones or those infested with pests. One hundred and sixty durian samples of Mon Thong varieties were used in this experiment. Then, the collected NIR spectra were augmented to improve the generalization ability of regression models. Deep neural network (DNNs) regressions were developed. The results showed that deep neural network (DNN) regression model possessed the best prediction performance, which were provided performance index. Almost all the best performance models were developed from the second derivative, except for the fat content model, which was developed from raw spectra. The best total soluble solids (TSS) model provided the coefficient of determination of calibration (R2c) and root mean square error of calibration (RMSEc) were 0.84 and 2.25 % and coefficient of determination of calibration (R2p), root mean square error of prediction (RMSEp) and ratio of performance to deviation (RPD) were 0.72 2.92 % and 1.92, respectively, and those of dry matter content (DMC) were provided R2c and RMSEc were 0.997, 0.58 %, and for prediction set provided R2p, RMSEp and RPD were 0.94, 3.13 %, and 4.21, respectively. For fat content (FC), they have also provided R2c and RMSEc were 0.84, 0.36 (g/100 g), while it provided R2p, RMSEp and RPD were 0.86, 0.50 (g/100 g), and 2.72, respectively. Moreover, for total sugar content (TSC) value, it also gave high accuracy, which provided R2c and RMSEc were 0.93, 0.49 (g/100 g) and R2p, RMSEp, and RPD were 0.91, 0.81 (g/100 g), 3.44, and for starch content (SC) also provided R2c and RMSEc were 0.93, 0.49(g/100 g) and R2p, RMSEp, and RPD were 0.76, 2.79 (g/100 g), 2.09, respectively. Therefore, the proposed method offers an ultrasensitive and effective strategy for estimation of nutritional compositions.
Some of the metrics are blocked by your
consent settings
Evaluating limit of detection and quantification for higher heating value and ultimate analysis of fast-growing trees and agricultural residues biomass using NIRS
(2023-10-09)
Shrestha, Bijendra
;
Shrestha, Zenisha
;
Posom, Jetsada
;
Sirisomboon, Panmanas
;
Shrestha, Bim Prasad
Accurate non-destructive assessment of biomass energy properties is essential for optimizing its use as an alternative fuel. In this study, 200 biomass samples were used to determine higher heating value (HHV) and 120 biomass samples for analyzing ultimate analysis parameters using near-infrared spectroscopy within the full wavenumber range of 12489.48 – 3594.87 cm-1. The samples were grounded, and five different types of partial least squares regression (PLSR) models were developed using traditional preprocessing, multi-preprocessing (MP) with 5 range, MP with 3 range, genetic algorithm, and successive projection algorithm. Limit of detection (LOD) and quantification (LOQ) were calculated using the best-performing model among five different PLSR models for HHV in kJ/kg, as well as the weight percentage (wt.%) of carbon (C), oxygen (O), hydrogen (H), and nitrogen (N). The LOD and LOQ for HHV were calculated as 622.42 kJ/kg and 1886.13 kJ/kg, respectively. Additionally, LOD and LOQ for ultimate analysis parameters, including C, O, H, and N were calculated as: 3.24 weight percentage (wt.%) and 9.81 wt.% for C, 2.04 wt.% and 6.18 wt.% for O, 0.35 wt.% and 1.05 wt.% for H, and 0.22 wt.% and 0.68 wt.% for N. The LOD and LOQ values for HHV, C, O, and H were lower than the minimum reference values used for model development, demonstrating the models’ high sensitivity and potential to reliably detect and precisely quantify these parameters. However, the LOD and LOQ values exceeded the minimum reference value used during model development for the N, indicating that the selected models have certain limitations in assessing the N content in biomass. The sample range should be expanded for wt.% of N to enhance the model’s performance, surpassing the LOD and LOQ values. This will improve the overall sensitivity of the model for reliable detection and quantification of N content in biomass samples.
Some of the metrics are blocked by your
consent settings
Total soluble solids, dry matter content prediction and maturity stage classification of durian fruit using long-wavelength NIR reflectance
(2023-12-01)
Saenphon, Chirawan
;
Ditcharoen, Sirirak
;
Malai, Chayuttapong
;
Saengprachatanarug, Khwantri
;
Wongpichet, Seree
The DM and TSS of durian pulp moving on a conveyor belt were measured for their rapid and non-destructive qualities based on quantitative and qualitative measurements. The calibration set and prediction set equaled 209 and 69 pulps, respectively. The quantitative test compared the performance of PLS regression for DM and TSS prediction developed from full wavelength (860–1754 nm) and a few significant variables using SPA, GA, and VIP methods. The qualitative test identified the possibility of maturity stage classification by comparing three supervised machine learning classifiers, namely SVM, random forest (RF), and LDA. Effective models for DM and TSS prediction were developed from second derivatives spectra combined with the GA method, exhibiting r2, SEP, and RPD of 0.85, 4.50%, and 2.64, respectively for DM, and 0.66, 5.15%, and 1.60, respectively, for TSS. The model classifying samples into two distinct groups, namely “reject” and “pass,” utilizing the LDA algorithm, exhibited an impressive accuracy rate of 94.20%, making it a suitable choice for quality assurance purposes. This result indicates that the few effective variables were more efficient than full wavelength and improved model accuracy with greater model stability. Enhancing the classification model could involve data sample balancing in each group, leading to further improvements.
Some of the metrics are blocked by your
consent settings
NIR Spectroscopy for Non-Destructive Prediction of Greenhouse Gas Emissions and Global Warming Potential by Biomass Combustion
(2026-05-01)
Sirisomboon, Panmanas
;
Gyawali, Prakash
;
Posom, Jetsada
;
Lapcharoensuk, Ravipat
;
Shrestha, Bim Prasad
Greenhouse gas (GHG) emissions from biomass combustion include carbon dioxide (CO<inf>2</inf>), methane (CH<inf>4</inf>) and nitrous oxide (N<inf>2</inf>O), which cause climate change and global warming. By measuring GHG emissions by biomass combustion, a potent protocol for the calculation of global warming potential (GWP), which is how much the global temperature has risen due to combustion processes, can be achieved, contributing to determining the mean reduction in global temperature rise and fostering a transition towards more sustainable energy systems. Additionally, warning can be given of the GHG and GWP risks associated with different species of biomass. This review includes the GHG emissions and GWP of biomass combustion and their measurement and estimation directly through biomass sample combustion, using unmanned aerial vehicles (UAVs) and satellite measurements of radiation interacting with atmospheric gases, or satellite-derived data and calculations according to IPCC guidelines. In addition, the relationship of lignocellulosic compounds and elements in biomass to HHV and GHG emissions is described. The key mechanism of molecular vibration of hydrogen bonds in biomass caused by NIR radiation related to GHG emissions is revealed and recorded regarding the possibility of using NIR spectroscopy for the prediction of GHG emissions and GWP. Calculation examples for sugarcane bagasse and other biomass species are shown. The comparative advantages and limitations of NIR spectroscopy with respect to other methods are included. These factors lead to elucidation of the possibility of using NIR spectroscopy for non-destructive prediction of GHG emissions. In this review, the feasibility of using NIR spectroscopy to evaluate GHG emissions, GWP and emission factors (EFs) as an alternative to IPCC estimation methods related to climate change by biomass combustion is confirmed. NIR spectroscopy is a novel methodology for predicting GHG emissions and GWP directly from intact chip or powder biomass spectral data without explicit gas measurement. This article records the essential spectroscopic knowledge of biomass polymer valorization that is of value in polymer science.
Some of the metrics are blocked by your
consent settings
Effect of Combined Non-Wood and Wood Spectra of Biomass Chips on Rapid Prediction of Ultimate Analysis Parameters Using near Infrared Spectroscopy
(2024-01-01)
Shrestha, Bijendra
;
Posom, Jetsada
;
Sirisomboon, Panmanas
;
Shrestha, Bim Prasad
;
Funke, Axel
The ultimate analysis parameters, including carbon (C), hydrogen (H), nitrogen (N), and oxygen (O) content in biomass, were rarely found to be predicted by non-destructive tests to date. In this research, we developed partial least squares regression (PLSR) models to predict the ultimate analysis parameters of chip biomass using near-infrared (NIR) raw spectra of non-wood and wood samples from fast-growing tree and agricultural residue and nine different traditional spectral preprocessing techniques. These techniques include first derivative (sd1), second derivative (sd2), constant offset, standard normal variate (SNV), multiplicative scatter correction (MSC), vector normalization, min-max normalization, mean centering, sd1 + vector normalization, and sd1 + MSC. Additionally, we employed a genetic algorithm (GA), successive projection algorithm (SPA), multi-preprocessing (MP) 5-range, and MP 3-range to develop a PLSR model for rapid prediction. A dataset consisting of 120 chip biomass samples was utilized for model development in which the samples were non-wood samples of 65–67% and wood samples of 33–35%, and the model performance was evaluated and compared. The selection of the optimum performing model was mainly based on criteria such as the coefficient of determination in the prediction set (R2<inf>P</inf>), root mean square error of the prediction set (RMSEP), and the ratio of prediction to deviation (RPD). The optimal model for weight percentage (wt.%) of C was obtained using GA–PLSR, yielding R2<inf>P</inf>, RMSEP, and RPD values of 0.6954, 1.1252 wt.%, and 1.8, respectively. Similarly, for wt.% of O, the most effective model was obtained using the multi-preprocessing PLSR–5 range method with R2<inf>P</inf> of 0.7150, RMSEP of 1.3088 wt.%, and RPD of 1.9. For wt.% of N, the optimal model was obtained using the MP PLSR-3 range method, resulting in R2<inf>P</inf>, RMSEP, and RPD values of 0.6073, 0.1008 wt.%, and 1.6, respectively. However, wt.% of the H model provided R2<inf>P</inf>, RMSEP, and RPD values of 0.5162, 0.2322 wt.%, and 1.5, respectively. Notably, the limit of quantification (LOQ) values for C, H, and O were lower than the minimum reference values used during model development, indicating a high level of sensitivity. However, the LOQ for N exceeded the minimum reference value, implying the samples to be predicted by the model must be in the range of reference range in the calibration set. By scatter plot analysis, the effect of combined non-wood and wood spectra of biomass chips on rapid prediction of ultimate analysis parameters using NIR spectroscopy was investigated. To include different species in a model, the species have to be not only in the different values of the constituents to make a wider range for a robust model, but also must provide their trend line characteristics in the scatter plot, i.e., correlation coefficient (R), slope, and intercept (same slope and slope approached to 1, and intercept is same (no gap) and approached zero, high R approached to 1). The effect of the R, slope, and intercept to obtain the better-optimized model was studied. The results show that the different species affected the model performance of each parameter prediction in a different manner, and by scatter plot analysis, which of these species were affecting the model negatively and how the model could be improved was indicated. This is the first time the effect has been studied by the principle of a scatter plot.
Some of the metrics are blocked by your
consent settings
Near-infrared spectroscopy, hyperspectral, multispectral imaging principles and applications in energy properties of biomass
(2023-08-21)
Posom, Jetsada
;
Shrestra, Bijendra
;
Maraphum, Kanvisit
;
Pitak, Lakkana
;
Saengprachatanarug, Khwantri
Biomass is renewable energy which is zero neutrality carbon energy. It is used for generating heat energy and electrical energy. Therefore, the use of biomass with high efficiency is important and the quality of biomass related to its energy should be measured before utilization and trading. The measurement of energy indexes of biomass is necessary to the thermal conversion process and the trading of biomass. However, the conventional measurement methods are laborious and take a long time, with a lot of costs. In recent years, near infrared spectroscopy (NIR) and imaging technologies (hyperspectral and multispectral images) have been widely investigated and applied as non-destructive, reliable and accurate techniques to monitor the quality and composition of biomass. This chapter contains the principle of NIR and imaging technique including essential component principles, NIR and imaging technique procedures, novel model development methods and applications. The non-destructive measurement of biomass quality as the real time and non- contact measurement will be represented. Moreover, this chapter will describe the application of NIR and imaging techniques for analysing the energy indexes of biomass, such as heating value or calorific value, proximate data, elemental composition, combustion index, pyrolysis characteristics, mechanical properties and so on.
Some of the metrics are blocked by your
consent settings
Predicting biomass global warming potential with FT-NIR spectroscopy
(2025-12-01)
Gyawali, Prakash
;
Shrestha, Bijendra
;
Phanomsophon, Thitima
;
Posom, Jetsada
;
Pornchaloempong, Pimpen
This research is to predict the global warming potential (GWP) of biomass by using Fourier transform near-infrared (FT-NIR) spectroscopy. A partial least squares regression model of 197 biomass chip samples was developed for predicting GWP of fast-growing trees and agricultural residues. The reference value of GWP of biomass sample was calculated by the method provided by Intergovernmental Panel on Climate Change (IPCC). After applying different spectral pretreatments and variable selection methods, the best model for predicting GWP was found using the 1st derivative spectrum pretreatment and covariance method (COVM) based variable selection. The results indicate GWP model exhibit good predictive capabilities, where the model can be usable with caution for any purpose including research, by achieving a coefficient of determination for prediction set (R2<inf>P</inf>) of 0.86, and ratio of prediction to deviation (RPD) of 2.6. Additionally, the RMSEP of 0.00063 suggests a low prediction error. This pioneering approach presents a swift and efficient means to determine GWP, the complex functionality parameter, which reveals an optimal relationship model, showcasing its efficacy in a significant advancement in the assessment of biomass functionality related to climate change issue. Additionally, the further research is recommended to integrate FT-NIR data with thermogravimetric analyser to simulate of different thermal conversion of biomass type where different emission gases are generated and with gas chromatography–mass spectrometry for evaluation of concentration of the generated gases for further refine GWP predictions which providing more comprehensive insights and exact content of emission gases affect global warming to support the IPCC.
Some of the metrics are blocked by your
consent settings
Improving the non-destructive maturity classification model for durian fruit using near-infrared spectroscopy
(2023-03-01)
Ditcharoen, Sirirak
;
Sirisomboon, Panmanas
;
Saengprachatanarug, Khwantri
;
Phuphaphud, Arthit
;
Rittiron, Ronnarit
The maturity state of durian fruit is a key indicator of quality before trading. This research aims to improve the near-infrared (NIR) model for classifying the maturity stage of durian fruit using a completely non-destructive measurement. Both NIR spectrometers were investigated: the short wavelength NIR (SWNIR) ranging from 450 to 1000 nm and long wavelength NIR (LWNIR) ranging from 860 to 1750 nm. The samples collected for experimentation consisted of four stages: immaturity, prematurity, maturity, and ripe. Each fruit was scanned at the rind position on the main fertile lobe (header, middle, and tail) and stem. The classification models were developed using three supervised machine learning algorithms: linear discriminant analysis (LDA), support vector machine (SVM), and K-Nearest neighbours (KNN). The analysis results revealed that the use of durian rind spectra only obtained between 83.15% and 88.04% accuracy for the LWNIR spectrometer, while the SWNIR spectrometer provided 64.73 to 93.77% accuracy. The performance of model increases when developing with combination between rind and stem spectra. The LDA model developed using a combination of rind and stem spectra provided the greatest efficiency, exhibiting 97.28% and 100% accuracy for LWNIR and SWNIR spectrometers, respectively. The LDA model is therefore recommended for obtaining spectra from smoothing moving average (MA) + baseline of rind position and when used in combination with the MA + standard normal variance (SNV) of stem spectra. The NIR spectroscopy indicated high potential for non-destructive estimation of the durian maturity stage. This process could be used for quality control in the durian export industry to solve the problem of unripe durian being mixed with ripe fruit.
Some of the metrics are blocked by your
consent settings
NIR Spectroscopy as an Alternative to Thermogravimetric Analyzer for Biomass Proximate Analysis: Comparison of Chip and Ground Biomass Models
(2024-02-01)
Shrestha, Bijendra
;
Posom, Jetsada
;
Sirisomboon, Panmanas
;
Shrestha, Bim Prasad
;
Pornchaloempong, Pimpen
This study investigates the non-destructive analysis of proximate parameters (moisture content, MC; volatile matter, VM; fixed carbon, FC; ash content) in various chipped and ground biomass using a combination of destructive thermogravimetric analysis (TGA) and non-destructive near-infrared spectroscopy (NIRS) with partial least squares regression (PLSR). The thermogravimetric method determines proximate analysis data through TG and DTG curves, tracking biomass mass loss over time or temperature. NIRS scans chipped biomass in diffuse reflectance, and ground biomass in transflectance mode, covering the wavenumber range from 3595 to 12,489 cm−1. PLSR-based models (Full-PLSR, GA-PLSR, SPA-PLSR, MP PLSR 5-range method, and MP PLSR 3-range method) are developed and evaluated based on R2P, RMSEP, and RPD. MC and FC models for chip biomass exhibit satisfactory performance, making them cautiously applicable in various applications, including research. Optimal models for MC and FC in chip biomass, constructed using GA-PLSR with the second derivative and Full-PLSR with a constant offset, yield high R2P values (0.8654 and 0.8773), low RMSEP values (0.85% and 2.12%), and high RPD values (2.9 and 3.0), indicating applicative capabilities. Other parameters such as MC and FC in ground biomass, as well as VM and ash content in both chip and ground biomass, are found suitable for rough screening. Model sensitivity, assessed by calculating LOQ, indicates high sensitivity for VM in both chip and ground biomass and FC in chip biomass, as the calculated LOQ value is lower than the minimum reference values used during model development. However, for the remaining parameters, LOQ values surpass the established minimum reference value, suggesting limitations in predicting samples below the calibration range. Continuous model enhancement incorporating an ample number of representative biomass samples and consistent validation with unknown samples are imperative for ensuring accurate predictions.
Some of the metrics are blocked by your
consent settings
Effect of Environment Temperature and Relative Humidity on Thermal Emissivity: Study Case of Mango Fruit
(2024-01-01)
Sirisomboon, Panmanas
;
Sripinyowanich Jongyingcharoen, Jiraporn
;
Junto, Apiwat
;
Phanomsophon, Thitima
;
Dachoupakan Sirisomboon, Cheewanun
This research was to study the effect of the environment condition during image captured including temperature and relative humidity in the packaging house of the mango exporting factory and in the orchard on the emissivity of mango fruit. The result showed that in the controlled environment of the packaging house in factory, the emissivity was increased (the mango emitted more energy) when the surface temperature was lower and the emissivity of mango is 0.71-0.84 and in the uncontrolled environment of open-air packaging yard in the mango orchard, the different transpiration rates of mango effected mainly by ambient temperature and relative humidity make the morning condition emissivity of 0.44-0.66 and the afternoon condition of 0.72-0.98. There was the effect of the different measured positions on the fruits where the physiology was different and the fluctuated environment in the latter condition made the wide range of emissivity of mangoes. This indicated the shortcoming of thermal imaging of horticultural product if the correct emissivity varied and difficult to set in the thermal camera setting, hence the inaccurate thermogram to be obtained.

Sirisomboon, Panmanas

Filters

Settings

Sort By

Results per page