Sirisomboon, Panmanas

Preferred name

Alternative Name

Sirisomboon, P.

Main Affiliation

School of Engineering

panmanas.si@kmitl.ac.th

Now showing 1 - 10 of 121

Some of the metrics are blocked by your
consent settings
Precision test for the spectral characteristic of FT-NIR for the measurement of water content of wheat straw
(2019-09-09)
Fonseca, F. G.
;
Funke, A.
;
Saechua, W.
;
Sirisomboon, P.
Near Infrared (NIR) Spectroscopy is widely employed as a rapid technique for the evaluation of properties of biomass materials. Precision and accuracy of the instruments is an important aspect in order to minimize error in the determination of results. The objective of this publication is to determine scanning repeatability and reproducibility of the NIR spectrometer for wheat straw (Triticum aestivum L.), using either a fixed scan or a rotating scan. The former presented marginally better repeatability but worse reproducibility. Samples in equilibrium with the local atmosphere versus samples of controlled and different moisture contents were also compared, and the latter performed better on the precision test but both fixed and rotating scans. As the ultimate objective of this test is the use of this method to determine variations between different moisture content, and as the rotating scan presents better reproducibility, this method was selected as the reference method for further NIR analyses focused on the variation of moisture content.
Some of the metrics are blocked by your
consent settings
Deep neural networks (DNNs) chemical compositions estimation of fresh durian in-line via near infrared spectroscopy
(2025-06-01)
Posom, Jetsada
;
Saenphon, Chirawan
;
Ditcharoen, Sirirak
;
Pitak, Lakkana
;
Sirisomboon, Panmanas
Near infrared (NIR) spectroscopy and deep neural network (DNN) models were adopted for evaluating the nutritional compositions in durian pulp. The quality inspection of durians through online channels remains challenging because consumers cannot directly touch or smell the fruit. This leads to issues with substandard durians, such as unripe ones or those infested with pests. One hundred and sixty durian samples of Mon Thong varieties were used in this experiment. Then, the collected NIR spectra were augmented to improve the generalization ability of regression models. Deep neural network (DNNs) regressions were developed. The results showed that deep neural network (DNN) regression model possessed the best prediction performance, which were provided performance index. Almost all the best performance models were developed from the second derivative, except for the fat content model, which was developed from raw spectra. The best total soluble solids (TSS) model provided the coefficient of determination of calibration (R2c) and root mean square error of calibration (RMSEc) were 0.84 and 2.25 % and coefficient of determination of calibration (R2p), root mean square error of prediction (RMSEp) and ratio of performance to deviation (RPD) were 0.72 2.92 % and 1.92, respectively, and those of dry matter content (DMC) were provided R2c and RMSEc were 0.997, 0.58 %, and for prediction set provided R2p, RMSEp and RPD were 0.94, 3.13 %, and 4.21, respectively. For fat content (FC), they have also provided R2c and RMSEc were 0.84, 0.36 (g/100 g), while it provided R2p, RMSEp and RPD were 0.86, 0.50 (g/100 g), and 2.72, respectively. Moreover, for total sugar content (TSC) value, it also gave high accuracy, which provided R2c and RMSEc were 0.93, 0.49 (g/100 g) and R2p, RMSEp, and RPD were 0.91, 0.81 (g/100 g), 3.44, and for starch content (SC) also provided R2c and RMSEc were 0.93, 0.49(g/100 g) and R2p, RMSEp, and RPD were 0.76, 2.79 (g/100 g), 2.09, respectively. Therefore, the proposed method offers an ultrasensitive and effective strategy for estimation of nutritional compositions.
Some of the metrics are blocked by your
consent settings
2D/3D vision-based mango's feature extraction and sorting
(2006-01-01)
Chalidabhongse, Thanarat
;
Yimyam, Panitnat
;
Sirisomboon, Panmanas
This paper describes a vision system that can extract 2D and 3D visual properties of mango such as size (length, width, and thickness), projected area, volume, and surface area from images and use them in sorting. The 2D/3D visual properties are extracted from multiple view images of mango. The images are first segmented to extract the silhouette regions of mango. The 2D visual properties are then measured from the top view silhouette as explained in [7]. The 3D mango volume reconstruction is done using volumetric caving on multiple silhouette images. First the cameras are calibrated to obtain the intrinsic and extrinsic camera parameters. Then the 3D volume voxels are crafted based on silhouette images of the fruit in multiple views. After craving all silhouettes, we obtain the coarse 3D shape of the fruit and then we can compute the volume and surface area. We then use these features in automatic mango sorting which we employ a typical backpropagation neural networks. In this research, we employed the system to evaluate visual properties of a mango cultivar called "Nam Dokmai". There were two sets total of 182 mangoes in three various sizes sorted by weights according to a standard sorting metric for mango export. Two experiments were performed. One is for showing the accuracy of our vision-based feature extraction and measurement by comparing results with the measurements using various instruments. The second experiment is to show the sorting accuracy by comparing to human sorting. The results show the technique could be a good alternative and more feasible method for sorting mango comparing to human's manual sorting. © 2006 IEEE.
Some of the metrics are blocked by your
consent settings
Modified specific gravity method for estimation of starch content and dry matter in cassava
(2021-07-01)
Maraphum, Kanvisit
;
Saengprachatanarug, Khwantri
;
Wongpichet, Seree
;
Phuphuphud, Arthit
;
Sirisomboon, Panmanas
An empirical model for the estimation of starch content (SC) and dry matter (DM) in cassava tubers was developed as an alternative method to polarimetry and dry oven. These improved estimation equations were developed based on the specific gravity (SG) method. To improve accuracy, the one hundred-seventy-four sample were obtained from four commercial varieties of cassava in Thailand including KU50, CMR38-125-77, RY9 and RY11, respectively. The age of sample collected from four to twelve months after planting was used in this experiment. The empirical model was created from their relationships between SG obtained from small sample size (~100 g) and its SC and DM. The SG for cassava was strongly correlated with the SC and DM, with values for the coefficient of determination (R2) of 0.81 and 0.83, respectively. The SC showed a high correlation with the DM, with R2 of 0.96. To confirm that the empirical model was effective when applied to other samples, unknown samples collected from another area were tested, and the results showed a standard error of prediction (SEP) of 1.02%FW and 3.49%, mean different (MD) of -0.66%FW, -0.89% for the SC and DM, respectively. Hence, our empirical equation based on a modified SG method could be used to estimate the SC and DM in cassava tubers. It can help breeders to reduce costs and time requirements. Moreover, breeders could be used the methods to evaluate the SC and DM from the tuber formation to harvesting stage and monitoring the changes in SC and DM during breeding.
Some of the metrics are blocked by your
consent settings
Near infrared spectroscopy as an alternative method for rapid evaluation of toluene swell of natural rubber latex and its products
(2018-06-01)
Lim, Chin Hock
;
Sirisomboon, Panmanas
Toluene swell or equilibrium swelling is universally used by rubber factories to measure the degree of crosslink of their compounded or prevulcanized latices at different stages of production. To apply near infrared spectroscopy for rapid and accurate quality control, spectral acquisition of prevulcanized latex, thin film and thick film was performed using a Fourier transform near infrared spectrometer in diffuse reflection mode across the wavenumber range of 12,500–3600 cm1. For prevulcanized latex an effective model was developed using partial least squares regression with preprocessing (first derivative + straight line subtraction method). The coefficient of determination (r2), root mean square error of cross validation and bias of the validation set were 0.71, 3.93% and 0.005%, respectively. For the thin film model the r2, root mean square error of cross validation and bias were 0.65, 4.01% and 0.028%, respectively. Whereas for the thick film model the r2, root mean square error of cross validation and bias were 0.70, 4.00% and 0.006%, respectively. Three models including prevulcanized latex, thin film and thick film were validated by 23 unknown samples, providing standard error of prediction and bias of 5.357 and 2.494, 4.565 and 1.001 and 3.641 and 0.961%, respectively, for prevulcanized latex, thin film and thick film. The model developed for the thick film spectra gave the best results.
Some of the metrics are blocked by your
consent settings
Evaluating limit of detection and quantification for higher heating value and ultimate analysis of fast-growing trees and agricultural residues biomass using NIRS
(2023-10-09)
Shrestha, Bijendra
;
Shrestha, Zenisha
;
Posom, Jetsada
;
Sirisomboon, Panmanas
;
Shrestha, Bim Prasad
Accurate non-destructive assessment of biomass energy properties is essential for optimizing its use as an alternative fuel. In this study, 200 biomass samples were used to determine higher heating value (HHV) and 120 biomass samples for analyzing ultimate analysis parameters using near-infrared spectroscopy within the full wavenumber range of 12489.48 – 3594.87 cm-1. The samples were grounded, and five different types of partial least squares regression (PLSR) models were developed using traditional preprocessing, multi-preprocessing (MP) with 5 range, MP with 3 range, genetic algorithm, and successive projection algorithm. Limit of detection (LOD) and quantification (LOQ) were calculated using the best-performing model among five different PLSR models for HHV in kJ/kg, as well as the weight percentage (wt.%) of carbon (C), oxygen (O), hydrogen (H), and nitrogen (N). The LOD and LOQ for HHV were calculated as 622.42 kJ/kg and 1886.13 kJ/kg, respectively. Additionally, LOD and LOQ for ultimate analysis parameters, including C, O, H, and N were calculated as: 3.24 weight percentage (wt.%) and 9.81 wt.% for C, 2.04 wt.% and 6.18 wt.% for O, 0.35 wt.% and 1.05 wt.% for H, and 0.22 wt.% and 0.68 wt.% for N. The LOD and LOQ values for HHV, C, O, and H were lower than the minimum reference values used for model development, demonstrating the models’ high sensitivity and potential to reliably detect and precisely quantify these parameters. However, the LOD and LOQ values exceeded the minimum reference value used during model development for the N, indicating that the selected models have certain limitations in assessing the N content in biomass. The sample range should be expanded for wt.% of N to enhance the model’s performance, surpassing the LOD and LOQ values. This will improve the overall sensitivity of the model for reliable detection and quantification of N content in biomass samples.
Some of the metrics are blocked by your
consent settings
Application of baby corn husk as a biological sustainable feedstock for the production of cellulase and xylanase by Lentinus squarrosulus Mont.
(2023-02-01)
Vichitraka, Asanee
;
Somboon, Pichayada
;
Tantratian, Sumate
;
Onmankhong, Jiraporn
;
Sirisomboon, Panmanas
In an effort to use baby corn husk (BCH) as a sustainable feedstock for cellulase and xylanase production by the Lentinus squarrosulus Mont. isolate LS-YA (LSM-LS-YA), a suitable pretreatment method and fermentation strategies were developed. BCH pretreated with 1 M sodium hydroxide for 90 min, an alkaline pretreatment, exemplified an appropriate pretreatment method. In a 10-L external Venturi injector bioreactor, the highest cellulase and xylanase production was 4.12 ± 0.36 unit/mL and 6.15 ± 0.36 unit/mL, respectively, when 1 g/L diammonium hydrogen phosphate was used as the nitrogen source and the aeration rate was controlled at 0.2 vvm. This study provides an informative perspective on the production of cellulase and xylanase from agricultural lignocellulosic materials, which could reduce agricultural waste while supporting a zero-waste circular economy, and this fermentation process would be applicable to larger-scale production.
Some of the metrics are blocked by your
consent settings
Physical properties of green soybean: Criteria for sorting
(2007-03-01)
Sirisomboon, Panmanas
;
Pornchaloempong, Pimpen
;
Romphophak, Teeranud
The objective of this research was to explore the possibility in developing a criteria for green soybean (Glycine max variety AGS 292) sorter. Green soybean could be classified into two main categories by its usage; the perfect pods (3-seed pod and 2-big seed pod) contained 47%, the rest was imperfect pods including 2-small seed pod, 1-seed pod, atrophied pod, twisted pod, and defected pod. Some important physical characteristics were investigated including width, length, thickness, pod weight, pod projected area, apparent density, bulk density, and seed firmness. The results illustrated that the perfect pods had length, pod weight, projected area and seed firmness significantly larger than the imperfect pods. All pod groups had apparent density equal or lower than water. Among all pod groups, the 2-big seed pods had the highest bulk density, thickest pod, and the firmest seed. The application of these physical properties for green soybean sorting was also proposed. © 2006 Elsevier Ltd. All rights reserved.
Some of the metrics are blocked by your
consent settings
Rapid evaluation of fat content in curry soup containing coconut milk by using near infrared spectroscopy
(2018-02-01)
Cheevitsopon, Ekkapong
;
Sirisomboon, Panmanas
The feasibility of a near infrared spectroscopy to evaluate the fat content in instant curry soup containing coconut milk including green curry, red curry, massaman curry and panang curry was investigated. The soup samples were collected from a processing line and as the finished product. There were also fat content-adjusted samples where the curry was made from the same recipe as in the processing line but increasing by 30, 60 and 90% coconut milk and reducing by 30, 60 and 90% coconut milk from normal. A Fourier transform near infrared spectrometer was used to collect scans. A partial least squares regression model for fat content was established using near infrared spectral data in conjunction with reference data, which was validated using a leave-one-out cross-validation and test set validation. The test set validation, using a set of unknown samples, showed better prediction performance. The best model developed using vector normalization spectral pre-treatment on 9404–7498 and 6102–5446 cm−1 provided coefficient of determination, root mean square error of prediction, bias and ratio of performance to interquartile values of 0.90, 0.9%, −0.1% and 1.2, respectively, for the validation samples. However, the model developed using samples without fat content adjusted samples gave a slightly lower coefficient of determination (0.89), but provided a lower root mean square error of prediction (0.5%) and acceptable ratio of standard error of validation to the standard deviation (3.2). In addition, the vibration bands of CH<inf>2</inf> which was in the long chain fatty acid moiety highly influenced the prediction of fat content in the curry soup. The near infrared spectroscopy protocol developed for the determination of fat could be applied in the instant curry soup production line.
Some of the metrics are blocked by your
consent settings
Potential of near infrared spectroscopy as a rapid method to detect aflatoxins in brown rice
(2019-06-01)
Dachoupakan Sirisomboon, C.
;
Wongthip, P.
;
Sirisomboon, P.
Brown rice is a main popular health food with high nutritional value and health benefits. As a result of poor post-harvest drying and inappropriate storage conditions, rice grains are often damaged through fungal spoilage as well as mycotoxin production. The objective of this research was to evaluate the possibility of using the near infrared spectroscopy, with a wavenumber range between 12500 and 4000 cm−1 (800–2500 nm), as a rapid method for detection of aflatoxins in brown rice. Firstly, storage trials were carried out to generate representative of samples contaminated and non-contaminated with aflatoxins. These data were used to create a partial least squares regression model using 120 brown rice samples with the required near infrared spectral data and aflatoxin concentration levels that were determined using a standard enzyme-linked immunosorbent assays method. The accuracy of developed models was externally validated using the test set. The statistical model developed from the treated spectra (vector normalization; SNV) provided the best accuracy in prediction with a coefficient of determination of prediction (r2) of 0.95, a root mean square error of prediction of 415.00 µg kg−1 and a bias −54.00 µg kg−1. The model developed showed good predictive performance which suggests that it could have practical applications as a rapid method to detect aflatoxins in brown rice.

Sirisomboon, Panmanas

Filters

Settings

Sort By

Results per page