Kaewpengkrow, Prangtip
Loading...
Preferred name
Kaewpengkrow, Prangtip
Alternative Name
Kaewpengkrow, Prangtip Rittichote
Main Affiliation
Email
prangtip.ka@kmitl.ac.th
2 results
Now showing 1 - 2 of 2
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Enhancing the hydrogen permeation of alumina composite porous membranes via graphene oxide addition(2023-01-12); ; ; Vichaphund, SupawanGraphene oxide (GO) membranes have attracted considerable interest for hydrogen (H<inf>2</inf>) purification applications. However, the addition of GO into matrix materials to enhance the efficiency of H<inf>2</inf> permeation remains a challenge. In this study, the fabrication of alumina/graphene oxide (AGO) composites containing varying contents of GO (0.5–3.0 wt.%) was investigated. The AGO composites were formed into pellets and sintered for 2 h at 1500 °C. Accordingly, the presence of GO in the membranes following sintering was confirmed by Raman spectroscopy. Additionally, the porosity of the AGO composites increased from 3.7% to 26.9% as the GO concentration increased from 0.5 wt.% to 3.0 wt.%. Furthermore, the average pore diameter of the AGO composites was in the range of 87–228 nm, and the pore size distribution was unimodal. The performance of the AGO membranes was investigated for the permeance of single gases H<inf>2</inf> and N<inf>2</inf> at 30–500 °C to evaluate their potential for H<inf>2</inf> separation applications. The AGO membranes with a GO addition of 2.5 and 3.0 wt.% exhibited a high hydrogen permeance of 232–410 × 10<sup>−6</sup> mol m<sup>−2</sup> s<sup>−1</sup> Pa<sup>−1</sup>, which was approximately 10 times greater than that of pristine Al<inf>2</inf>O<inf>3</inf> membrane. Additionally, the ideal H<inf>2</inf>/N<inf>2</inf> selectivity values ranged from 4.02 to 4.20. Furthermore, gas permeation through the AGO membrane was observed to follow the Knudsen diffusion mechanism. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Hydrogen Sulfide Adsorption on Alumina/Graphene Oxide Composites at Ambient Temperature(2022-11-01); ; ; Hydrogen sulfide (H<inf>2</inf>S) is one of the most common pollutants found in natural gas and industrial waste. Over the few decades, the removal of H<inf>2</inf>S has become a significant problem. In the field of a clean environment such as water purification and toxic gas removal, graphene oxide (GO) has been found to have advantages. In this study, the influence of GO on alumina (Al<inf>2</inf>O<inf>3</inf>) as an adsorbent of H<inf>2</inf>S was examined. A series of Al<inf>2</inf>O<inf>3</inf>/GO (AGO) composites with varying graphene oxide addition (0.5–3.0 wt%) were prepared using the high-temperature sintering method. The X-ray diffraction patterns indicate the primary phase of Al<inf>2</inf>O<inf>3</inf> with hexagonal crystal structure for all AGO composites. Raman spectrometry measurements confirmed that the GO particles were incorporated in AGO composites. The TEM image indicated that GO nanosheets were embedded between Al<inf>2</inf>O<inf>3</inf> grains. The efficiency of AGO adsorbent at ambient temperature was investigated and compared with the pristine Al<inf>2</inf>O<inf>3</inf> adsorbent. The AGO composites adsorbent demonstrated the H<inf>2</inf>S breakthrough capacity in the range of 0.07–0.43 mg/g, which is higher than that of pristine Al<inf>2</inf>O<inf>3</inf> (0.06 mg/g). Furthermore, the highest H<inf>2</inf>S breakthrough capacity of 0.43 mg/g was obtained from AGO containing 3.0 wt% GO. This investigation demonstrates that the AGO adsorbent fabricated using a simple method has the potential to be used for H<inf>2</inf>S removal at ambient temperature.