Loading...
Durable nitrate sensor by surface modification
Author(s)
Chaisriratanakul, W.
Bunjongpru, W.
Jeamsaksiri, W.
Srisuwan, A.
Porntheeraphat, S.
Chaowicharat, E.
Hruanun, C.
Poyai, A.
Phomyothin, D.
Date Issued
November 25, 2016
Type
Article
Abstract
This work presents the development of nitrate sensor based on Ion Sensitive Field Effect Transistor (ISFET) technology to achieve longer device's lifetime. This lifetime depended on the adhesion of PVC ion-selective membrane on the Si3N4 sensing membrane of ISFET. The adhesion level directly affected the leaching of plasticizer. Such improvement utilized surface modification techniques by immersing the sensing membrane in the solution of 5% 3-mercaptopropyl-trimethoxysilane (MPTMS)/methanol. The modified surface was detected through the change of hydrophobicity and thickness of MPTMS using the contact angle measurement and ellipsometry techniques. The appropriate time for immersion was 18 h. The modified surface achieved the optimal hydrophobicity with contact angle of 100.32°. The presence of MPTMS film was confirmed by detecting the thiol-group using Fourier Transform Infrared (FTIR) spectrophotometry and Auger Electron Spectroscopy (AES). The PVC ion-selective membrane was then immobilized on the surface to create nitrate sensors with the following characteristics. The Nitrate-Nitrogen detection limit = 2.44 ppm with linear range from 5 to 60 ppm at sensitivity of 56 mV/dec. (R2 = 1). The response time was 90 s. Finally, this nitrate sensor could extend the total utilization lifetime from 8 to 17 weeks.
Citation
Surface and Coatings Technology, 306, 58-62, 2016