Loading...
Hydrogen Sulfide Adsorption on Alumina/Graphene Oxide Composites at Ambient Temperature
Author(s)
Hankoy, Montree
Vichaphund, Supawan
Atong, Duangduen
Date Issued
November 1, 2022
Type
Article
Abstract
Hydrogen sulfide (H2S) is one of the most common pollutants found in natural gas and industrial waste. Over the few decades, the removal of H2S has become a significant problem. In the field of a clean environment such as water purification and toxic gas removal, graphene oxide (GO) has been found to have advantages. In this study, the influence of GO on alumina (Al2O3) as an adsorbent of H2S was examined. A series of Al2O3/GO (AGO) composites with varying graphene oxide addition (0.5–3.0 wt%) were prepared using the high-temperature sintering method. The X-ray diffraction patterns indicate the primary phase of Al2O3 with hexagonal crystal structure for all AGO composites. Raman spectrometry measurements confirmed that the GO particles were incorporated in AGO composites. The TEM image indicated that GO nanosheets were embedded between Al2O3 grains. The efficiency of AGO adsorbent at ambient temperature was investigated and compared with the pristine Al2O3 adsorbent. The AGO composites adsorbent demonstrated the H2S breakthrough capacity in the range of 0.07–0.43 mg/g, which is higher than that of pristine Al2O3 (0.06 mg/g). Furthermore, the highest H2S breakthrough capacity of 0.43 mg/g was obtained from AGO containing 3.0 wt% GO. This investigation demonstrates that the AGO adsorbent fabricated using a simple method has the potential to be used for H2S removal at ambient temperature.
Citation
Chiang Mai Journal of Science, 49(6), 1618-1632, 2022