Loading...
Near-Infrared Spectroscopy Modeling of Combustion Characteristics in Chip and Ground Biomass from Fast-Growing Trees and Agricultural Residue
Author(s)
Shrestha, Bijendra
Posom, Jetsada
Shrestha, Bim Prasad
Ariffin, Hidayah
Date Issued
March 1, 2024
Type
Article
Abstract
This study focuses on the investigation and comparison of combustion characteristic parameters and combustion performance indices between fast-growing trees and agricultural residues as biomass sources. The investigation is conducted through direct combustion in an air environment using a thermogravimetric analyzer (TGA). Additionally, partial least squares regression (PLSR)-based models were developed to assess combustion performance indices via near-infrared spectroscopy (NIRS), serving as a non-destructive alternative method. The results obtained through the TGA reveal that, specifically, fast-growing trees display higher average ignition temperature (227 °C) and burnout temperature (521 °C) in comparison to agricultural residues, which exhibit the values of 218 °C and 515 °C, respectively. Therefore, fast-growing trees are comparatively difficult to ignite, but sustain combustion over extended periods, yielding higher temperatures. However, despite fast-growing trees having a high ignition index (Di) and burnout index (Df), the comprehensive combustion performance (Si) and flammability index (Ci) of agricultural residue are higher, indicating the latter possess enhanced thermal and combustion reactivity, coupled with improved combustion stability. Five distinct PLSR-based models were developed using 115 biomass samples for both chip and ground forms, spanning the wavenumber range of 3595–12,489 cm−1. The optimal model was selected by evaluating the coefficients of determination in the prediction set (R2P), root mean square error of prediction (RMSEP), and RPD values. The results suggest that the proposed model for Df, obtained through GA-PLSR using the first derivative (D1), and Si, achieved through full-PLSR with MSC, both in ground biomass, is usable for most applications, including research. The model yielded, respectively, an R2P, RMSEP, and RPD, which are 0.8426, 0.4968 wt.% min⁻4, and 2.5; and 0.8808, 0.1566 wt.%2 min⁻2 °C⁻3, and 3.1. The remaining models (Di in chip and ground, Df, and Si in chip, and Ci in chip and ground biomass) are primarily applicable only for rough screening purposes. However, including more representative samples and exploring a more suitable machine learning algorithm are essential for updating the model to achieve a better nondestructive assessment of biomass combustion behavior.
Citation
Energies, 17(6), 2024