KMITL

Permanent URI for this communityhttps://dspace.kmitl.ac.th/handle/kmitl/1

Browse

Search Results

Now showing 1 - 4 of 4

Some of the metrics are blocked by your
consent settings
Biological Insulating Liquids: New Insulating Liquids for High Voltage Engineering
(2023-01-01)
Pagger, Ernst Peter
;
Pattanadech, Norasage
;
Uhlig, Frank
;
Muhr, Michael
This book describes the state-of-the-art use of biological insulating liquids in detail. In recent years, more and more transformers filled with esters have been put into operation. This is because people recognize the benefits of ester liquids in terms of their fire safety (high flash and fire points) and environmental characteristics, judging from their biodegradability, their low CO2 footprint (only valid for natural ester) and their beneficial interactions with solid insulation, etc. One of the main reasons is that the water adsorption and absorption characteristics of these liquids are excellent and very different compared to mineral oil. The today’s discussion about climate change and global warming is an additional driver for using natural ester. Another advantage is that transformers filled with biological insulating liquids can operate with an overload of up to 150%. This is advantageous in the case of volatile energy generation from wind and solar power and in the supply of electrical energy for electromobility. Liquid inside electrical equipment is the lifeblood that serves both as a dielectric and a cooling medium. Some properties of these liquids differ from mineral oil, which had to be considered in the transformer design. The dielectric liquid is always in direct contact with transformer materials; therefore, the interaction should be very well understood, especially when retrofilling an existing mineral oil filled device. There are several natural ester fluids derived from various seeds and fruits on the market, and their properties may differ more or less. In the book, the most important properties of the different biological insulating fluids and mineral oil are compared. Ester fluids have already found their way into various standards. The condition of the device can be verified very well from the contents of the insulating liquids. For analysis and testing, the same equipment and devices that are commonly used for mineral oil are used for ester liquid. The chemical and physical behaviors of ester fluids compared to mineral oil are different. This must always be considered when interpreting test results stemming from ester fluids. The book is a guideline for students, original equipment manufacturers, users, laboratories and authorities in the use of biological insulating liquids.
2
Some of the metrics are blocked by your
consent settings
Wind energy analysis in the coastal region of bangladesh
(2021-09-01)
Islam, Khandaker Dahirul
;
Theppaya, Thanansak
;
Ali, Fida
;
Waewsak, Jompob
;
Suepa, Tanita
Diversifying the energy mix of Bangladesh is becoming indispensable not only to improve its energy security, but also for a more sustainable economic development. This study focused on mapping the wind potential of southern coastal areas of Bangladesh to estimate the wind energy potential, along with the reduction in carbon emissions due to wind energy. Analysis of the carbon footprint was based on the annual energy production (AEP) from the selected low-wind turbine generators (WTGs). The time series-measured and-predicted wind data were incorporated with the high-resolution mesoscale and microscale wind re-source mapping technique at 60, 80, and 100 m above ground level (AGL). Coupling mesoscale and microscale modeling provided reliable mapping results for the commercially exploitable wind resource and was verified by ground-based wind measurement. The results revealed that, among the selected areas, two sites named Charfashion and Monpura have a promising annual mean wind speed of 7.3 m/s at 100 m AGL for energy generation. Different WTGs with ranges of 1–3.3 MW were used to estimate the wind energy generation capacity at different sites in the study area. A WTG with a 1 MW wind energy generation capacity installed at 60 m AGL in the selected site has the potential to produce 2.79 GWh/year of clean energy, reducing 1781.689 tons of CO<inf>2</inf> per year, whereas a 3.3 MW WTG at 80 m AGL can produce 18.99 GWh/year of energy, reducing 12,098.54 tons of CO<inf>2</inf> per year, and a 1.6 MW WTG at 100 m AGL produces 11.04 GWh/year of energy, cutting 7035.028 tons of CO<inf>2</inf> per year. With its reliable scientific and time-tested wind energy estimation method, this research is very important for the development of wind energy in the southern coastal areas of Bangladesh to meet the increasing energy demands through initiating the development of renewable energy to improve the energy security and reduce the carbon emissions of the country.
Some of the metrics are blocked by your
consent settings
Carbon footprint assessment of home-stays in Thailand
(2021-01-01)
Koiwanit, Jarotwan
;
Filimonau, Viachaslau
Home-stays represent a popular category of tourist accommodation in South-East Asia but their carbon footprint has not been systematically assessed. This hampers an understanding of the energy consumption patterns of home-stays, impedes identification of the main carbon hotspots in home-stay operations and prevents a comparative analysis of the carbon performance of home-stays against other tourist accommodation categories. Using the method of screening Life Cycle Energy Analysis (LCEA), this study assessed the carbon footprint of a sample of home-stays in Thailand and undertook its comparative analysis against other categories of tourist accommodation, globally and in Thailand. The overall annual carbon footprint of home-stays was assessed as low (1.3 tonnes of CO<inf>2</inf>-eq. per home-stay on average) which was due to small size and limited guest amenities. The ‘per guest night’ carbon footprint of home-stays was comparable to that of budget hotels in Thailand (0.32 kg of CO<inf>2</inf>-eq. per home-stay on average) which was attributed to low occupancy driven by high demand seasonality.
2
Some of the metrics are blocked by your
consent settings
Business viability and carbon footprint of Thai-grown Nam Dok Mai mango powdered drink mix
(2020-05-01)
Koiwanit, Jarotwan
;
Riensuwarn, Fonthong
;
Palungpaiboon, Penpicha
;
Pornchaloempong, Pimpen
This research analyzes the business feasibility of freeze-dried powdered drink mix from Thai-grown Nam Dok Mai (NDM) mango for exportation to the United States. Since food processing generates large quantities of greenhouse gas emissions which contribute to global warming, the cradle-to-grave environmental impact of the mango powdered mix, specifically global warming potential (GWP), was determined using life cycle assessment. Based on the feasibility analysis, the mango powdered mix is thus positioned as a novelty for health-conscious and environmentally-concerned consumers because the product uses NDM mango fruits of premium quality as the main ingredient and carries a carbon footprint label on the packaging. A 50 g sachet of freeze-dried NDM mango powdered drink mix is priced at USD 7.80. The financial analysis showed that the mango drink mix possesses great business potential with high profitability. The environmental impact assessment identified the freeze drying process as the dominant contributor of GWP (15.40 kgCO<inf>2</inf>eq) due to high electricity consumption.
1

KMITL

Browse

Filters

Settings

Sort By

Results per page

Search Results