Thianpong, Chinaruk
Loading...
Preferred name
Thianpong, Chinaruk
Alternative Name
Thianpong, C.
Main Affiliation
Email
chinaruk.th@kmitl.ac.th
14 results
Now showing 1 - 10 of 14
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Heat Transfer Intensification in a Heat Exchanger by Means of Twisted Tapes in Rib and Sawtooth Forms(2022-12-01); ; - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Compound heat transfer enhancement of a dimpled tube with a twisted tape swirl generator(2009-08-01); - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Thermal performance enhancement of a circular tube fitted with inclined perforated disk inserts(2026-03-01) - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Turbulent flow heat transfer and pressure loss in a double pipe heat exchanger with louvered strip inserts(2008-02-01); In the present work, heat transfer and friction characteristics were experimentally investigated, employing louvered strips inserted in a concentric tube heat exchanger. The louvered strip was inserted into the tube to generate turbulent flow which helped to increase the heat transfer rate of the tube. The flow rate of the tube was in a range of Reynolds number between 6000 and 42,000. The turbulent flow devices were consisted of (1) the louvered strips with forward or backward arrangements, and (2) the louvered strip with various inclined angles (θ = 15°, 25° and 30°), inserted in the inner tube of the heat exchanger. In the experiment, hot water was flowed through the inner tube whereas cold water was flowed in the annulus. The experimental data obtained were compared with those from plain tubes of published data. Experimental results confirmed that the use of louvered strips leads to a higher heat transfer rate over the plain tube. The increases in average Nusselt number and friction loss for the inclined forward louvered strip were 284% and 413% while those for the backward louvered strip were 263% and 233% over the plain tube, respectively. In addition, the use of the louvered strip with backward arrangement leads to better overall enhancement ratio than that with forward arrangement around 9% to 24%. © 2007 Elsevier Ltd. All rights reserved. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Experimental investigation of heat transfer and flow friction in a circular tube fitted with regularly spaced twisted tape elements(2006-12-01); Experimental investigation of heat transfer and friction factor characteristics in a double pipe heat exchanger fitted with regularly spaced twisted tape elements, were studied. The inner and outer diameters of the inner tube are 50.6 and 25.8 mm, respectively and cold and hot water were used as working fluids in shell side and tube side. The twisted tapes were made of the stainless steel strip with thickness of 1 mm and the length of 1500 mm. They were inserted in the test tube section in two different cases: (1) full-length typical twisted tape at different twisted ratios (y = 6.0 and 8.0), and (2) twisted tape with various free space ratios (S = 1.0, 2.0, and 3.0). The results, obtained from the tube with twisted tape insert, were compared with those without twisted tape. The results show that the heat transfer coefficient increased with twist ratio (y). Whereas the increase in the free space ratio (S) would improve both the heat transfer coefficient and friction factor. The results from each case were correlated for Nusselt number and friction factor. Subsequently, the predicted Nusselt number and friction factor from the correlations were plotted to compare with the experimental data. It was found that Nusselt number was within ± 15% and ± 10% for friction factor. © 2006 Elsevier Ltd. All rights reserved. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Influence of sawtooth twisted tape on thermal enhancement of heat exchanger tube(2023-03-01); ; Maruyama, NaokiThis article employs sawtooth twisted tapes to generate swirling flow and interrupted flowing disturbance in order to increase the level of heat transfer rate. The influences of the sawtooth twisted tape (S-TT) on enhanced heat transfer rate, friction factor and aerothermal performance index (API) behaviors are analyzed. The sawtooth twisted tapes (S-TTs) possessing constant pitch/twist ratio (y//W) of 3.0 and six sawtooth angles (α) of 20°, 30°, 40°, 50°, 60°, and 70° are assessed. Considering turbulent flow using air as the testing fluid, experiments were investigated at 6,000 < Re < 20,000 under boundary conditions of constant heat flux. According to the experimental findings, sawtooth twisted tape (S-TT) improves heat transfer rate and raises pressure loss with varying rates based on sawtooth angles (α). With the sawtooth twisted tape (S-TT) and 70° sawtooth angles, the optimum API of 1.33 is attained, while Nusselt number and friction factor are 32 and 0.135 at Re = 6,000. The recommended sawtooth twisted tape (S-TT) yields a highest Nusselt number of 78, which is 1.6 times greater than the typical twisted tape (TT) and 1.1 times greater than the plain tube. The combination of the TT and sawtooth patterns can be beneficial in terms of boosting heat transfer rate and API relating coupling of swirling flow and interrupted flowing disruption effects since the sawtooth twisted tape (S-TT) offers superior performance than the TT. Additionally, the heat exchanger tubes fitted with sawtooth twisted tape (S-TT) at sawtooth angles (α) of 20°, 30°, 40°, 50°, 60°, and 70° gain greater Nusselt number than the plain tube up to 158.3%, 162.2%, 166.1%, 171.7%, 179.7% and 186.2%, respectively. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Thermodynamic performance analysis of a round tube fitted with gradient quadruple twisted tapes(2026-03-01); ; Chamoli, SunilAir-cooled heat exchangers employing twisted-tape passive inserts exist in many forms; however, designing tapes that are practical to manufacture while enhancing heat transfer without incurring excessive pressure drop remains challenging. This study therefore introduces gradient quadruple twisted tapes (GQTT), which gradually vary the pitch across four tapes to control swirl and mix along the tube. In addition, the turn count changes in steps along the four tapes, which triggers extra turbulence near each change and keeps the flow well mixed downstream. This simple and manufacturable pattern aims to boost heat transfer while keeping the added friction under control. Our objective is to evaluate whether GQTT can improve overall performance while keeping the pressure drop within a practical range, in comparison with a plain tube and a constant-turn tape. A realizable k-ε turbulence model, rigorously validated against benchmark data, was applied to eight GQTT variants and benchmarked against a plain tube and a constant-turn tape for Reynolds numbers (Re) between 5000 and 19,000. Spatial second-order schemes, grid-independence testing, and strict residual criteria ensured solution accuracy. Among the candidates, the descending-opposite-pitch configuration (Ds-OPSD) consistently delivered the highest performance. First-law analysis reveals a peak thermal performance factor (TPF) of 1.42 at Re = 5000, equating to a 42 % gain in overall thermo-hydraulic efficiency over the plain tube, with the Nusselt number (Nu) climbing from 57.5 to 100 across the examined Re window. Second-law metrics corroborate this superiority. At the same Re of peak TPF, the Ds-OPSD cuts exergy destruction from 291.4 to 62 W (≈79 % reduction versus the plain tube and ≈22 % versus the constant-turn tape). Total entropy generation remains minimal and nearly constant (S<inf>total</inf> ≈ 0.206–0.212), while the Bejan number stays high (≈0.999–0.971), indicating that the enhancement is achieved without excessive frictional penalties. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Thermal characteristics in a heat exchanger tube fitted with dual twisted tape elements in tandem(2010-01-01); - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Evaluation of aerothermal performance of a round tube with regularly-spaced multi-channel twisted tape elements installed(2024-06-01); ; - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Enhanced Heat Transfer of a Heat Exchanger Tube Installed with V-Shaped Delta-Wing Baffle Turbulators(2023-07-01); ; Maruyama, NaokiThe influences of V-shaped delta-wing baffles on the thermohydraulic performance characteristics in a round tube were experimentally tested. The V-shaped delta-wing baffles having a set number of wings (N = 4, 6, and 8) were comparatively tested. The V-shaped delta-wing baffles with various pitch ratios of P/D = 2.0, 2.5, and 3.0 were thoroughly fitted inside a tube. In the present work, the baffles were responsible for both the recirculation/reverse flow behind the solid baffle and the longitudinal vortex flow behind the V-shaped wing. The V-shaped winged baffles with N = 8 produced high heat transfer rates by promoting the development of reverse and vortex flows. These currents aid in fluid mixing between the two streams. Experimental results suggested that utilizing V-shaped delta-wing baffles having N = 4, 6, and 8 led to Nusselt number enhancement of up to 97–105.6%, 105.8–127.8% and 114.8–138.9%, respectively. When N was 8, the V-shaped wings baffles created additional multi vortex flows, which resulted in some fluid mixing between the vortex and the reverse flow. It was discovered that a greater turbulent intensity is imparted to the flow that was occurring between the V-shaped delta-wing baffles, which led to an increase in the rate of heat transfer when the pitch ratio was decreased. The increase in Nusselt number was up to 118.26–151.3% more than it was in a tube with the lowest pitch ratio (P/D = 2.0). It was also found that the baffles with N = 8 wings and P/D = 3.0 offered a maximum aerothermal performance factor (APF) of 1.01. Furthermore, the V-shaped delta-wing baffles have the potential for energy savings at low Re ≤ 6000, indicated by the APF beyond unity.