Kumngern, Montree

Preferred name

Kumngern, Montree

Alternative Name

KUMNGERN, Montree

Kumngern, M.

Main Affiliation

School of Engineering

montree.ku@kmitl.ac.th

Now showing 1 - 10 of 126

Some of the metrics are blocked by your
consent settings
Mem-Elements Emulator Design with Experimental Validation and Its Application
(2021-01-01)
Raj, Niranjan
;
Ranjan, Rajeev Kumar
;
Khateb, Fabian
;
Kumngern, Montree
An emulator circuit of Memristor, Memcapacitor, and Meminductor commonly termed as mem-elements has been demonstrated in this article. The circuit has been realized using the technique of current mode, which provides better performance over voltage mode counterparts. The current mode analog building blocks, along with a few passive components, have been used in the presented circuit implementation. The fingerprint characteristics have been observed in both simulation and experimental results, validating the theoretical analysis. The robustness of the presented design has been supported by performing different types of analysis like process corner, temperature, and non-volatility behavior. The mem-elements emulator design has been simulated using $0.18~\mu \text{m}$ TSMC process parameter, and ±1.2 V power supply has been used. The commercial ICs AD844 and CA3080 are used for the experimental demonstration of the proposed mem-elements design by making a prototype on a breadboard. A layout area of $4829~\mu \text{m}^{2}$ , $8098~\mu \text{m}^{2}$ , and $8061~\mu \text{m}^{2}$ respectively is required for the Memristor, Memcapacitor, and meminductor circuit. The power consumed by the mem-elements circuit is also provided. A chaotic has been implemented using mem-elements to show the usefulness of the emulator design.
Some of the metrics are blocked by your
consent settings
Current-mode MISO filter using CCCDTAs and grounded capacitors
(2015-07-01)
Chaichana, Amornchai
;
Jantakun, Adirek
;
Kumngern, Montree
;
Jaikla, Winai
This paper presents the current-mode multi-input single-output (MISO) biquadratic filter using current-controlled current differencing tranconductance amplifier (CCCDTA) as an active building block. The proposed circuit comprises three CCCDTAs and two grounded capacitors performing completely standard functions: low-pass, high-pass, band-pass, bandreject and all-pass functions and does not require double input current signals as well as inverting input currents. The pole frequency and quality factor of the proposed circuit can be adjusted electronically/independently via dc bias currents. In addition, the filter circuit has low-input and high-output impedance which facilitates easy connecting for current-mode circuit. The proposed circuit uses all grounded capacitors which is very suitable to further develop into an integrated circuit and without requiring any matching condition. Moreover, the active and passive sensitivities are low. The PSPICE simulation results are included to show the workability of the proposed circuit.
Some of the metrics are blocked by your
consent settings
Electronically tunable multiphase sinusoidal oscillator using translinear current conveyors
(2010-11-01)
Kumngern, Montree
;
Chanwutitum, Jirasak
;
Dejhan, Kobchai
A new electronically tunable current-mode multiphase sinusoidal oscillator based on translinear current conveyors is presented. The proposed oscillator circuit, which employs only one translinear current conveyor and one grounded capacitor for each phase, can generate arbitrary N output current equal-amplitude signals that are equally spaced in phase (N being even or odd), all at high output impedance terminals. The frequency of oscillation and the condition of oscillation can be controlled electronically and independently through the bias current of the translinear current conveyor. The proposed structure also has simple circuitry, low-component count, and is highly suitable for integrated circuit implementation. The theoretical results were verified by PSPICE simulation. In addition, the modification of the N sinusoidal oscillators to construct a programmable multiphase oscillator is also discussed. © 2010 Springer Science+Business Media, LLC.
Some of the metrics are blocked by your
consent settings
High frequency and high precision CMOS half-wave rectifier
(2010-10-01)
Kumngern, Montree
;
Knobnob, Boonying
;
Dejhan, Kobchai
In this paper, a new high frequency and high precision half-wave rectifier circuit which is very suitable for CMOS technology implementation is presented. The system comprises a voltage to current converter, a dual output precision current-mode half-wave rectifier, and two current to voltage converters. An input voltage signal is converted into a current signal by using a current conveyor and a MOS resistor. The current signal is rectified using a dual output class-AB precision rectifier cell and then converted into two output voltages by using grounded MOS resistors. This class-AB current-mode precision rectifier is employed for providing high frequency performance. Simulated rectifier results based-on a 0.5 μm CMOS technology with ±1.2 V supply voltage demonstrates very high operating frequency, very precise rectification and good temperature stability. © Springer Science+Business Media, LLC 2010. © Springer Science+Business Media, LLC 2010.
Some of the metrics are blocked by your
consent settings
0.3-V Voltage-Mode Versatile First-Order Analog Filter Using Multiple-Input DDTAs
(2023-07-01)
Kumngern, Montree
;
Khateb, Fabian
;
Kulej, Tomasz
;
Steffan, Pavel
This paper presents a versatile first-order analog filter using differential difference transconductance amplifiers (DDTAs). The DDTA employs the bulk-driven (BD) multiple-input MOS transistors technique (MI-MOST) operating in the subthreshold region. This results in low-voltage and low-power operational capability. Therefore, the DDTA, designed using 130 nm CMOS technology from UMC in the Cadence environment, operates with 0.3 V and consumes 357.4 nW. Unlike previous works, the proposed versatile first-order analog filter provides first-order transfer functions of low-pass, high-pass, and all-pass filters within a single topology. The non-inverting, inverting, and voltage gain of the transfer functions are available for all filters. Furthermore, the proposed structure provides high-input and low-output impedance, which is required for voltage-mode circuits. The pole frequency and voltage gain of the filters can be electronically controlled. The total harmonic distortion of the low-pass filter was calculated as −39.97 dB with an applied sine wave input signal of 50 mV<inf>pp</inf>@ 50 Hz. The proposed filter has been used to realize a quadrature oscillator to confirm the advantages of the new structure.
Some of the metrics are blocked by your
consent settings
Current-Mode Active Filter Using EX-CCCII
(2024-06-01)
Kumngern, Montree
;
Khateb, Fabian
;
Kulej, Tomasz
;
Tooprakai, Siraphop
This paper presents a novel multiple-input and multiple-output current-mode universal analog filter with electronic tuning capability. The proposed circuit uses a single second-generation current-controlled current conveyor with extra-X terminals (EX-CCCII) and two grounded capacitors. The filter can offer five standard filtering functions, namely low-pass, high-pass, band-pass, band-stop, all-pass responses, in the same circuit without changing the internal configuration of the filter by selecting appropriate input and output signals. To obtain the five standard filtering functions, inverted input signal and input matching conditions are absent. The natural frequency of all filter responses can be electronically controlled. The proposed circuit was simulated by SPICE using 0.18 μm CMOS process from Taiwan Semiconductor Manufacturing Company (TSMC). The results of experiments using the integrated circuit operational amplifier AD844 confirm the functionality of the new filter.
Some of the metrics are blocked by your
consent settings
1 V Electronically Tunable Differential Difference Current Conveyors Using Multiple-Input Operational Transconductance Amplifiers
(2024-03-01)
Kumngern, Montree
;
Khateb, Fabian
;
Kulej, Tomasz
;
Langhammer, Lukas
This paper presents electronically tunable current conveyors using low-voltage, low-power, multiple-input operational transconductance amplifiers (MI-OTAs). The MI-OTA is realized using the multiple-input bulk-driven Metal Oxide Semiconductor transistor (MIBD-MOST) technique to achieve minimum power consumption. The MI-OTA also features high linearity, a wide input range, and a simple Complementary Metal Oxide Semiconductor (CMOS). Thus, high-performance electronically tunable current conveyors are obtained. With the MI-OTA-based current conveyor, both an electronically tunable differential difference current conveyor (EDDCC) and a second-generation electronically tunable current conveyor (ECCII) are available. Unlike the conventional differential difference current conveyor (DDCC) and second-generation current conveyor (CCII), the current gains of the EDDCC and ECCII can be controlled by adjusting the transconductance ratio of the current conveyors. The proposed EDDCC has been used to realize a voltage-to-current converter and current-mode universal filter to show the advantages of the current gain of the EDDCC. The proposed current conveyors and their applications are designed and simulated in the Cadence environment using 0.18 μm TSMC (Taiwan Semiconductor Manufacturing Company) CMOS technology. The proposed circuit uses ±0.5 V of power supply and consumes 90 μW of power. The simulation results are presented and confirm the functionality of the proposed circuit and the filter application. Furthermore, the experimental measurement of the EDDCC implemented in the form of a breadboard connection using a commercially available LM13700 device is presented.
Some of the metrics are blocked by your
consent settings
Dual-mode diplexer with high isolation based on amplitude and phase cancellation technique
(2018-01-01)
Wattikornsirikul, Natchayathorn
;
Kumngern, Montree
This paper presents a dual-mode diplexer with easy fabrication and high signal isolation based on amplitude and phase cancellation technique. The dual-mode structure enables a compact and easy asymmetrical frequency response which also requires considerable attenuation between the proximity in frequency of the transmitter and that of the receiver. Two back-to back dual-mode three-port diplexers and a 180° phase shifter are easily employed to construct the proposed device, which are combined to form a four-port dual-mode diplexer. A 180° phase shift in one branch can be achieved by delayed transmission line. The simulated and measured four-port dual-mode diplexers are designed at the operational frequency of Tx/Rx at 1.95 GHz and 2.14 GHz, respectively. The measured results of Tx/Rx dual-mode diplexer devices are presented of 48.5 dB Tx/Rx isolation. This four-port dual-mode diplexer achieves the isolation (S<inf>32</inf>) more than 21.5 dB compared with a conventional three-port dual-mode diplexer.
Some of the metrics are blocked by your
consent settings
0.5-V High Linear Fully Differential Multiple-Input Bulk-Driven OTA With Effective Self-Embedded CMFB
(2024-01-01)
Khateb, Fabian
;
Kulej, Tomasz
;
Kumngern, Montree
;
Prommee, Pipat
This paper presents a new fully differential multiple-input operational transconductance amplifier (FD MI-OTA) with an effective self-embedded common-mode feedback circuit (CMFB). The circuit employs several design techniques to extend the linearity to the rail-to-rail level, such as a bulk-driven, multiple-input capacitive voltage divider and source degeneration. The circuit uses self-cascode transistors to increase the gain of the OTA from one side and to create a common-mode feedback circuit, needed to control the common-mode output voltage from the other side. Thus, the CMFB is part of the OTA and as a result, its chip area and power consumption remain unchanged. The performance of the proposed circuit was simulated using TSMC s CMOS 0.18 μ m process in the Cadence Virtuoso System Design Platform to validate the performance of the topology. Intensive simulation results based on Monte Carlo and process, voltage, temperature corners were performed to confirm the OTA's performance and the robustness of the CMFB. The circuit operates with a supply voltage of 0.5 V and consumes 17.5nW of power, making it suitable for applications with extremely low voltage supply and low frequency. As an application, a second-order low-pass filter was designed based on the proposed FD MI-OTA.
Some of the metrics are blocked by your
consent settings
Low-power sample and hold circuits using current conveyor analogue switches
(2018-07-01)
Kumngern, Montree
;
Nonthaputha, Thanat
;
Khateb, Fabian
This study presents low-power sample and hold (S/H) circuits using second-generation current conveyor (CCII). Unlike previous S/H circuits, switch of the proposed S/H circuits can be obtained using CCII which works as current conveyor analogue switch (CCAS). The state of CCAS is controlled by sampling pulse that can be applied via its bias current source. The proposed S/H circuits offer low-power consumption, high-speed and absent from non-overlapping clock signal requirements. Three configurations of S/H circuit are proposed, namely single-ended S/H, differential S/H and serial-to-parallel S/H circuits. The proposed S/H circuits have been simulated using 0.18 μm complementary metal oxide semiconductor (CMOS) process from Taiwan semiconductor manufacturing company (TSMC). The simulation results are used to confirm the workability of the proposed structures.

Kumngern, Montree

Filters

Settings

Sort By

Results per page