Chuwattanakul, Varesa

Loading...
Thumbnail Image
Preferred name
Chuwattanakul, Varesa
Alternative Name
Chuwattanakul, V.
Main Affiliation
Email
varesa.ch@kmitl.ac.th

Settings

Now showing 1 - 2 of 2
  • Loading...
    Thumbnail Image
    Some of the metrics are blocked by your 
    consent settings
    Item type:Publication,
    Evaluation of aerothermal performance of a round tube with regularly-spaced multi-channel twisted tape elements installed
    (2024-06-01)
    Phila, Arnut
    ;
    Chuwattanakul, Varesa
    ;
    Thianpong, Chinaruk
    ;
    Bhattacharyya, Suvanjan
    ;
    Naphon, Paisarn
    This article presents a study of aerothermal performance of tubes with regularly-spaced multi-channel twisted tape elements (RS-MTT) installed. This research aimed to find the proper design RS-MTTs that induce swirl flow which potentially improves fluid mixing between the core fluid and the fluid near the tube wall, thereby accelerating the heat transfer rate. Additionally, the effects of Reynolds numbers and free-spacing ratios (s/y) on heat transfer, friction loss, and thermal performance behaviors were examined. The RS-MTTs having different free-spacing ratios (s/y) of 0.0, 0.25, 0.5, 0.75, and 1.0 were tested. Air was utilized as the testing fluid in experiments with Reynolds numbers (Re) spanning from 6000 to 20,000. The utilization of RS-MTTs with s/y = 0.0, 0.25, 0.5, 0.75, and 1.0 augmented heat transfer rates up to 1.74, 1.80, 1.85, 1.90, and 2.15 times given by the plain tube alone while the friction factors increased by 4.22, 4.61, 3.87, and 4.05 times, respectively. At the lowest Reynolds number of 6000, the thermal enhancement factors of the tube containing the RS-MTTs with s/y = 0.0, 0.25, 0.5, 0.75, and 1.0 reached the maximum values of 1.42, 1.35, 1.31, 1.27, and 1.23, respectively. Among the RS-MTTs tested, the RS-MTT with s/y = 0.0 showed the best thermal enhancement factor of 4.56%, corresponding to the heat transfer augmented of 11.52% with a friction penalty of 8.71%.
  • Loading...
    Thumbnail Image
    Some of the metrics are blocked by your 
    consent settings
    Item type:Publication,
    Characterization of Heat Transfer Enhancement and Flow Topology in a Three-Start Spirally Corrugated Tube
    (2025-12-01)
    Du, Yuexiang
    ;
    Phila, Arnut
    ;
    Promthaisong, Pitak
    ;
    Chuwattanakul, Varesa
    ;
    Eiamsa-ard, Smith
    The article provides a numerical analysis of the heat transfer characteristics and laminar periodic flow in a three-dimensional 3-start spirally corrugated tube. The working fluid is air, with a flow rate in terms of Reynolds numbers (Re) that ranges from 200 to 2,000. The investigation is conducted at six different pitch ratios (PR = 0.75, 1.0, 1.25, 1.5, 2.0, and 2.5) and five different depth ratios (DR = 0.02, 0.04, 0.06, 0.08, and 0.10). The results indicated that the spiral flow along the tube length was generated by the 3-start spirally corrugated tube. The swirl flow is divided into two components: the primary swirl flow, which is visible at the core, and the secondary swirl flow, which is visible at the near wall. These components contribute to the enhancement of fluid mixing, boundary layer disruption, and heat transfer on the tube wall. The Nusselt number (Nu) and friction factor (f) were increased as a result of the decrease in PR and the increase in Re and DR. The range of the Nu/Nu₀, f/f₀, and thermal performance factor (TPF) in a range analysis is 1.02 - 15.90, 0.97 - 5.52, and 0.73 - 2.33, respectively. At Re = 2,000, the corrugated tube with DR = 0.10 exhibited the greatest TPF of 2.33. Additionally, the results indicate that the 3-start spirally corrugated tube significantly improves heat transfer compared to the corresponding straight tube. The findings suggest that the structural characteristics of the flow path within the tube can be changed by a suitable PR and DR to optimize the overall heat transfer rate and thermal performance factor.