Petchmaneelumka, Wandee
Loading...
Preferred name
Petchmaneelumka, Wandee
Alternative Name
Petchmaneelumka, W.
Main Affiliation
Email
wandee.pe@kmitl.ac.th
66 results
Now showing 1 - 10 of 66
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Electronically adjustable phase shifter using OTAs(2010-12-01); ; First-order phase shifter using operational transconductance amplifiers (OTAs) as active elements is presented in this paper. The corner frequency of the proposed phase shifter can be adjusted by electronic means. The purpose of this paper is emphasized on simple configuration and low cost. The phase response between input and output signals against the operating frequency is varied from 180 to 0 degrees of phase lead. The principle of the proposed circuit is confirmed by simulation and experimental results. To verify the proposed circuit performance, the sinusoidal oscillator is provided for circuit application. ©ICROS. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Linear Variable Differential Transformer Signal Conditioning Circuit Based on Phase-Locked LoopThe purpose of this paper is to propose a novel technique for extracting the position signal from an inductive displacement transducer named a linear variable differential transformer (LVDT). In general, the movement of the LVDT core causes its primary inductance change in linear form. The primary winding of the LVDT is used as a time-dependent element for the triangular and square wave generator, which can be called self-oscillation, to generate frequency. The advantage of the proposed technique is that it can measure the displacement using the LVDT without an external oscillator. The change in primary inductance causes the frequency deviation generated by the oscillator. The deviated frequency is captured and converted into a voltage signal using the principle of the phase-locked loop. All the components used in this study are commercially available. The merits of this proposed technique are simple configuration, small size, and low cost. Moreover, the operating range of the LVDT can be extended without the limitation of the nonlinear transfer characteristic. The performance of the proposed technique is discussed in detail and confirmed by experimental implementation. Experimental results show that the maximum error from the proposed technique is about 0.42% and the operating range of the LVDT can be extended to more than 200%. It can be seen that the proposed technique is suitable for embedded measurement in small or micro robots. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Temperature Compensation for Transformer-type TransducerA novel technique to compensate the temperature effect of a transformer-type transducer is proposed in this paper. The effect of the ambient temperature on the transformer-type transducer is investigated from a primary-winding current. The advantage of the proposed technique is that the temperature effect is compensated without requiring a temperature sensor, making it suitable for applications in robotic and automation systems operated in harsh environments. The primary-winding current of the transducer is generated using a second-generation current conveyor (CCII). The excitation signal of the transformer-type transducer is driven by the CCII and the current flowing through the primary winding is transferred to an output signal of the CCII. The deviation of the primary-winding current due to the temperature effect is evaluated from the output signal of the CCII. The temperature effect on the transducer is manipulated by a closed-loop principle using a subtract-and-sum action instead of a traditional proportional-plusintegral action to eliminate the deviation of the primary-winding current. Therefore, the temperature effect on the transducer is compensated. A linear variable differential transformer (LVDT) is used to demonstrate the proposed technique, whose performance is discussed in detail and confirmed experimentally. All devices used in this experiment are commercially available. Experimental results show that the measured error of the output signal from the LVDT at 70 C can be reduced from 6.2% without temperature compensation to 0.06% by using the proposed technique, which has the advantages of a low cost, simple configuration, and high performance. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Wireless Carbon Monoxide Level Control and Monitoring SystemThis paper proposes an online carbon monoxide control and monitoring system. The proposed system comprises an MQ-7 CO gas sensor module, a DHT11 digital temperature and humidity sensor module, an ESP8266 module, and a Relay Module. The ThingSpeak platform is used to create HMI for online monitoring of CO level, temperature, humidity, and status of the ventilation fan. This proposed system can measure CO and monitor all parameters of measurement data, alert users when CO values exceed the set value. In addition, the measured CO values are used to control the ventilation system operation (ON or OFF) to maintain the CO at a non-harmful level. The experiment testing and results with three conditions show that the proposed system can measure and monitor CO level, temperature, and humidity online with satisfying values. The ventilation fan can operate with function as a design procedure and maintain CO at a non-harmful level. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Enhanced sinusoidal amplitude detector for fast response applications(2013-03-28); In this paper, an enhanced sinusoidal-amplitude detector suitable for fast response applications is proposed. Implementation method based on commercially available devices employs a novel control signal generator to improve operation speed of previously reported sinusoidal amplitude detector. The control signal generator used consists of a time-delay circuit, AND logic gate, and three comparators. The enhanced amplitude detector provides faster amplitude detection as well as smaller operation error for amplitude input changes. Experimental results verify a good agreement with theoretical expectation. © 2013 ICIC International. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Power monitoring circuit using operational amplifiers(2010-12-01); ; - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Enhanced differential voltage-to-Frequency converter for telemetry applications(2010-01-01); This paper presents an enhanced differential voltage-to-Frequency (dVFC) suitable for telemetry applications. The realization method employs op-amps in conjunction with current conveyors and Set-Reset latch. The converter gain can be easily adjusted through the variation of a single resistor. Compared to the previous dVFC using only current conveyors and Set-Reset latch, the proposed converter offers significant improvements in accuracy and circuit configuration. Its benefits are higher accuracy, simpler structure, fewer components, and lower costs. Experimental results verifying performances of the proposed dVFC are closely agreed with expected values. © 2010 SICE. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, 8-Electrode data collection system for electrical capacitance tomography(2006-12-01); - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Advanced planning for multi-product across a supply chain(2009-04-23) - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Simple LVDT signal to DC converter(2017-02-18); ; A simple technique to produce a linear signal from a displacement transducer, linear variable differential transformer (LVDT), is introduced in this paper. The two-quadrant divider is used to precede the ratio of a different and sum of the two winding signals from the LVDT instead of a four-quadrant divider of a recent approach. The two- quadrant divider is obtained by an operational transcondutance amplifier (OTA) in the form of a voltage-tocurrent converter. The signal from the divider is held by the sample and hold circuit (SHC) controlled by the peak-amplitude finder. As a result, the held signal is achieved without using a low-pass filter. The temperature effect of both OTA and LVDT are compensated. The merit of the proposed technique is that the circuit requires without the low-pass filter. Therefore, the fast response is obtained. The performance of the proposed scheme is confirmed by the experimental results using commercial devices.