Supavarasuwat, Piya
Loading...
Preferred name
Supavarasuwat, Piya
Main Affiliation
Email
piya.su@kmitl.ac.th
11 results
Now showing 1 - 10 of 11
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Synthesis of electronically tunable multifunction biquad filter using voltage differencing differential input buffered amplifiers(2025-02-01); ; ; Biquad filters are commonly used in analog circuits for various purposes in signal processing and communication applications. We synthesize an analog active biquad filter with five types of voltage-mode filtering functions. The filter is synthesized using a parallel passive resistor-inductor-capacitor (RLC) network and unity-gain voltage differencing amplifier. A voltage differencing differential input buffered amplifier (VD-DIBA) is the main active component, and the biquad filter has a three-input single-output (TISO) topology. By replacing the passive inductor and resistor with VD-DIBA-based inductance and resistance simulators with a subtractor, the TISO voltage-mode versatile filter is obtained from two VD-DIBAs, one resistor, and two capacitors connected to the ground. The proposed filter can provide five types of voltage-mode filtering functions: inverting bandpass and lowpass responses as well as noninverting band-stop, high-pass, and all-pass responses. The all-pass filter requires no additional active components. The three input voltage nodes have high impedance, and a low-impedance output voltage node facilitates cascade connections without using additional voltage buffers. In addition, the natural frequency and quality factor can be electronically tuned. The quality factor is controlled without disturbing the passband gain and natural frequency. The proposed filter is simulated and verified experimentally in the Personal Simulation Program with Integrated Circuit Emphasis (PSPICE) and through laboratory tests employing VD-DIBAs implemented using commercially available components. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Reconfigurable Voltage-Mode First-Order Multifunction Filter Employing Second-Generation Voltage Conveyor (VCII) With Complete Standard Functions and Electronically Controllable Modification(2023-01-01); ; - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Single Commercially Available Integrated Circuit-based Sinusoidal Oscillators with Amplitude Adjustability and Electronic Control of Condition(2024-09-01); - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Design of Electronically Controllable Multifunction Active Filter with Amplitude Controllability Using Two Commercially Available ICs(2022-01-01); ; In this contribution, the design and analysis of an active multifunction biquad filter that provides five voltage-mode filtering configurations in the same core filtering circuit are presented. The design emphasizes using the commercially available ICs, LT1228, which are easy for off-the-shelf implementation and cheaper compared with the chip implementation. The proposed multifunction filter is realized from two commercial LT1228 ICs as the active function block, combined with five passive elements (three resistors and two capacitors) with three input voltage nodes and a single output voltage node. The following advantages are given for this design: (i) it provides high-pass (HP), low-pass (LP), band-stop (BS), band-pass (BP), and all-pass (AP) filtering functions; (ii) orthogonal and electronic tuning of the natural frequency ω0 and bandwidth (the quality factor: Q); (iii) output voltage node of the proposed circuit is low impedance; (iv) passband voltage gain is controllable; and (v) matching condition and extra double gain voltage-mode amplifier are not required. The effect of the parasitic element in LT1228 on the filter performance is analyzed and included to strengthen the design idea. The PSpice simulation results using LT1228 with ±5 V and the experimental results tested from the hardware implementation are given to prove the validity of the designed multifunction filter. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Inductance simulators and their application to the 4th order elliptic lowpass ladder filter using cmos vd-dibas(2021-03-02); - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Single-input multiple-output voltage-mode shadow filter based on VDDDAs(2019-05-01); ; ; This paper presents a voltage-mode shadow filter with single-input multiple-output (SIMO) configuration using voltage differencing differential difference amplifiers (VDDDAs). In this design, the low-pass and high-pass output functions of the single-input three-output second order filter are feedback via the voltage amplifier. The proposed filter consists of three VDDDAs, one grounded resistor and two grounded passive elements. The proposed filter uses grounded elements which is attractive for integrated circuit (IC) fabrication. It can simultaneously provide low-pass (LP), high-pass (HP), band-pass (BP), band-reject (BR) and all-pass (AP) responses without matching condition. The proposed circuit has high input impedance. The natural frequency (ω <inf>0</inf> ) and quality factor (Q) can be independently and electronically tuned by changing the external DC bias currents. The effect of the non-ideal and parasitic elements of the VDDDA is studied and investigated. The PSpice simulation and experimental results using CMOS technology and commercially available active devices are given to confirm the workability of the proposed filter. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Cascadable independently and electronically tunable voltage-mode universal filter with grounded passive components(2018-02-01); ; ; Khateb, FabianIn this paper, the voltage-mode universal filter employing the active building block, called voltage differencing differential difference amplifier (VDDDA) is introduced. The proposed circuit configuration has single output voltage node and five input voltage nodes. All input voltage nodes exhibit high impedance with low output impedance of the output voltage node, which is completely cascaded without the use of any external voltage buffer. The proposed filter realizes bandpass (BP), lowpass (LP), highpass (HP), allpass (AP) and bandstop (BS) filtering functions with using the same circuit topology. The output filtering response function can be obtained by appropriately applying input voltage without any matching condition. The control of the natural frequency and the quality factor can be done electronically and independently. The proposed circuit comprises three VDDDAs, two grounded capacitors and single grounded resistor. The workability of the proposed filter is investigated via PSpice simulation program and experimental results. The results agree well with theoretical anticipations. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Design of low input and high output impedance current-mode biquad filter using CDTAs with independent control of quality factor and pole frequency(2013-12-31); ; Jaikhang, WipobhIn this study, a single-input multiple-outputs current-mode analog biquadratic filter, based on current differencing transconducatance amplifier (CDTA) is presented. The proposed filter uses two CDTAs, one resistor and two grounded capacitors, which is well suited for integrated circuit implementation. The circuit simultaneously gives 3 standard transfer functions, namely, lowpass, highpass and bandpass filters with independent control of quality factor and pole frequency by electronic method. By summing of I<inf>HP</inf> and I<inf>LP</inf>, the notch filter can be also achieved. Moreover, the circuit possesses low input and high output impedance which would be an ideal choice for current-mode cascading. The PSPICE simulation results are included verifying the workability of the proposed filter. The given results agree well with the theoretical anticipation. © 2013 IEEE. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Electronically controlled voltage mode first order multifunction filter using low-voltage low-power bulk-driven OTAs(2019-09-01); ; ; In this paper, a new versatile voltage mode first order filter using low-voltage low-power bulk-driven OTAs is presented. The proposed filter with two high impedance input-voltage nodes and single output-voltage node consists of two OTAs, one grounded capacitor and one grounded resistor. Three filtering responses, low-pass (LP), high-pass (HP) and all-pass (AP) are obtained by appropriately applying the input signal into the input nodes. The natural frequency (ω<inf>0</inf>) can be electronically tuned by the bias current. In case of all-pass filter, its phase response is electronically controlled by adjusting only single bias current. With this feature, it doesn't need to simultaneously change two bias currents or two passive element values. The performances of the proposed filter were evaluated via PSPICE simulations using CMOS 0.18 μm TSMC technology parameters (level 7) with ±0.4 V supply voltages. The proposed filter consumes 47.2 μW. To obtain the actual testing results, the proposed filter was also experimented using commercially available IC, LM13700. Moreover, the three phases sinusoidal oscillator based on proposed first order high-pass filter was designed and investigated by PSPICE simulation and experiment. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Electronically tunable current-mode biquad filter employing CCCDTAs and grounded capacitors with low input and high output impedance(2013-12-01); ; ; In this study, a single-input multiple-outputs current-mode analog biquadratic filter, based on current controlled current differencing transconductance amplifier (CCCDTA) is presented. The proposed filter uses two CCCDTAs and two grounded capacitors without any external resistors, which is well suited for integrated circuit implementation. The filter simultaneously gives 3 standard transfer functions, namely, lowpass, highpass and bandpass filters with independent control of quality factor and pole frequency by electronic method. By summing of I<inf>HP</inf> and L<inf>LP</inf>, the notch filter can be also achieved. Moreover, the circuit has low input and high output impedance which would be an ideal choice for cascading in current-mode circuit. The PSPICE simulation results are included verifying the workability of the proposed filter. The given results agree well with the theoretical anticipation. © 2013 Elsevier GmbH.1