Supavarasuwat, Piya

Preferred name

Supavarasuwat, Piya

Main Affiliation

School of Industrial Education and Technology

piya.su@kmitl.ac.th

Now showing 1 - 5 of 5

Some of the metrics are blocked by your
consent settings
Reconfigurable Voltage-Mode First-Order Multifunction Filter Employing Second-Generation Voltage Conveyor (VCII) With Complete Standard Functions and Electronically Controllable Modification
(2023-01-01)
Jaikla, Winai
;
Sangyaem, Surasak
;
Supavarasuwat, Piya
;
Khateb, Fabian
;
Minaei, Shahram
In this contribution, the realization of a first-order, two-input, single-output voltage-mode multifunction filter employing a second-generation voltage conveyor (VCII) is described. The proposed first-order versatile filter is extremely simple, composed of a single VCII and three passive devices. Because of its low output impedance, the output voltage node can be easily cascaded with other voltage-mode configurations without the requirement of any buffers. In the same circuit topology, the proposed first-order filter provides various filtering functions: inverting and non-inverting low-pass (LPF), inverting and non-inverting high-pass (HPF), as well as inverting and non-inverting all-pass (APF). The digital method allows the selection of output first-order filtering functions without the need for additional circuits such as inverting or double-gain amplifiers. Furthermore, the pass-band gain of the low-pass and high-pass responses can be adjusted by varying the resistance or capacitance values without influencing the pole frequency as well as the phase response. The influence of VCII's current/voltage gain errors and parasitic elements on filtering performance is also investigated. Moreover, the modification of the proposed lagging phase all-pass filter to achieve electronic controllability is also proposed by replacing the passive resistor with the operational transconductance amplifier (OTA). The 0.18μm TSMC CMOS structure of the VCII employed in the proposed filter operates in the subthreshold region and utilizes the bulk-driven technique (BD), enabling it to operate with 0.4V supply voltage and consuming 383 nW of power. The total harmonic distortion (THD) of the LPF with an applied input voltage Vinpp=300 mV @ 50Hz is -49.5 dB. An application example as a quadrature sinusoidal oscillator realized from the proposed first-order allpass filter and lossless integrator is also included. The performance of the proposed reconfigurable voltage-mode first-order filter is simulated and experimentally tested using a commercially available AD844 IC-based VCII with ±5 V power supply.
Some of the metrics are blocked by your
consent settings
Inductance simulators and their application to the 4th order elliptic lowpass ladder filter using cmos vd-dibas
(2021-03-02)
Jaikla, Winai
;
Bunrueangsak, Sirigul
;
Khateb, Fabian
;
Kulej, Tomasz
;
Suwanjan, Peerawut
This paper presents inductance simulators using the voltage differencing differential input buffered amplifier (VD-DIBA) as an active building block. Three types of inductance simulators, including floating lossless inductance, series inductance-resistance, and parallel inductance-resistance simulators, are proposed, in addition to their application to the 4th order elliptic lowpass ladder filter. The simple design procedures of these inductance simulators using a circuit block diagram are also given. The proposed inductance simulators employ two VD-DIBAs and two passive elements. The complementary metal oxide semiconductor (CMOS) VD-DIBA used in this design utilizes the multiple-input metal oxide semiconductor (MOS) transistor technique in order to achieve a compact and simple structure with a minimum count of transistors. Thanks to this technique, the VD-DIBA offers high performances compared to the other CMOS structures presented in the literature. The CMOS VD-DIBAs and their applications are designed and simulated in the Cadence environment using a 0.18 µm CMOS process from Taiwan semiconductor manufacturing company (TSMC). Using a supply voltage of ±0.9 V, the linear operation of VD-DIBA is obtained over a differential input range of −0.5 V to 0.5 V. The lowpass (LP) ladder filter realized with the proposed inductance simulators shows a dynamic range (DR) of 80 dB for a total harmonic distortion (THD) of 2% at 1 kHz and a 1.8 V peak-to-peak output. In addition, the experimental results of the floating inductance simulators and their applications are obtained by using VD-DIBA constructed from the available commercial components LM13700 and AD830. The simulation results are in agreement with the experimental ones, confirming the advantages of the inductance simulators and their application.
Some of the metrics are blocked by your
consent settings
Single-input multiple-output voltage-mode shadow filter based on VDDDAs
(2019-05-01)
Huaihongthong, Pintira
;
Chaichana, Amornchai
;
Suwanjan, Peerawut
;
Siripongdee, Surapong
;
Sunthonkanokpong, Wisuit
This paper presents a voltage-mode shadow filter with single-input multiple-output (SIMO) configuration using voltage differencing differential difference amplifiers (VDDDAs). In this design, the low-pass and high-pass output functions of the single-input three-output second order filter are feedback via the voltage amplifier. The proposed filter consists of three VDDDAs, one grounded resistor and two grounded passive elements. The proposed filter uses grounded elements which is attractive for integrated circuit (IC) fabrication. It can simultaneously provide low-pass (LP), high-pass (HP), band-pass (BP), band-reject (BR) and all-pass (AP) responses without matching condition. The proposed circuit has high input impedance. The natural frequency (ω <inf>0</inf> ) and quality factor (Q) can be independently and electronically tuned by changing the external DC bias currents. The effect of the non-ideal and parasitic elements of the VDDDA is studied and investigated. The PSpice simulation and experimental results using CMOS technology and commercially available active devices are given to confirm the workability of the proposed filter.
Some of the metrics are blocked by your
consent settings
Cascadable independently and electronically tunable voltage-mode universal filter with grounded passive components
(2018-02-01)
Supavarasuwat, Piya
;
Kumngern, Montree
;
Sangyaem, Surasak
;
Jaikla, Winai
;
Khateb, Fabian
In this paper, the voltage-mode universal filter employing the active building block, called voltage differencing differential difference amplifier (VDDDA) is introduced. The proposed circuit configuration has single output voltage node and five input voltage nodes. All input voltage nodes exhibit high impedance with low output impedance of the output voltage node, which is completely cascaded without the use of any external voltage buffer. The proposed filter realizes bandpass (BP), lowpass (LP), highpass (HP), allpass (AP) and bandstop (BS) filtering functions with using the same circuit topology. The output filtering response function can be obtained by appropriately applying input voltage without any matching condition. The control of the natural frequency and the quality factor can be done electronically and independently. The proposed circuit comprises three VDDDAs, two grounded capacitors and single grounded resistor. The workability of the proposed filter is investigated via PSpice simulation program and experimental results. The results agree well with theoretical anticipations.
Some of the metrics are blocked by your
consent settings
Electronically tunable current-mode biquad filter employing CCCDTAs and grounded capacitors with low input and high output impedance
(2013-12-01)
Jaikla, Winai
;
Khateb, Fabian
;
Siripongdee, Surapong
;
Supavarasuwat, Piya
;
Suwanjan, Peerawut
In this study, a single-input multiple-outputs current-mode analog biquadratic filter, based on current controlled current differencing transconductance amplifier (CCCDTA) is presented. The proposed filter uses two CCCDTAs and two grounded capacitors without any external resistors, which is well suited for integrated circuit implementation. The filter simultaneously gives 3 standard transfer functions, namely, lowpass, highpass and bandpass filters with independent control of quality factor and pole frequency by electronic method. By summing of I<inf>HP</inf> and L<inf>LP</inf>, the notch filter can be also achieved. Moreover, the circuit has low input and high output impedance which would be an ideal choice for cascading in current-mode circuit. The PSPICE simulation results are included verifying the workability of the proposed filter. The given results agree well with the theoretical anticipation. © 2013 Elsevier GmbH.
1

Supavarasuwat, Piya

Filters

Settings

Sort By

Results per page