Kamoldilok, Surachart
Loading...
Preferred name
Kamoldilok, Surachart
Alternative Name
Kamoldilok, S.
Kamoldilok, Surachat
Main Affiliation
Email
surachart.ka@kmitl.ac.th
27 results
Now showing 1 - 10 of 27
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Analysis of effective numerical aperture in 2-D photonic crystal waveguide(2014-01-01); ; Yupapin, P. P.The effective numerical aperture calculation in two-dimensional Photonic crystal waveguide has been proposed. In this paper we present the analysis of ray optics refracted inside nano rods and at the boundaries between rods, which separates rod gap is much smaller than the incident wavelength assumed to reflect on the region. In operation, the resolving numerical aperture was compared with the finite difference time domain method via OptiFDTD software. Although numerical aperture mentioned above was found to be extremely close to fiber optics, a transmission passes though compartments of the rods are observed due to significant estimation of transmission and reflection of electric field. The compared simulation results will be discussed. By the aforementioned is that in the near future we will modify wave equation in periodic media of waveguide structures reached to the transverse electric equation of beam propagation in the two-dimensional Photonic crystal waveguide analysed. © (2014) Trans Tech Publications, Switzerland. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Growth stage detection for food consumption management in smart cricket farming using a deep learning technique(2025-11-01); ; ; This research proposed a novel method for tracking and predicting the growth stages of two-spotted crickets, reared in a temperature-controlled box at different growth stages using the YOLOv5s model. The images of crickets feeding inside the rearing box were taken with an infrared camera above the feeding point every hour. Images of the cricket were used to train a YOLOv5s model to detect crickets for each growth stage in the rearing box. The experimental results showed that the trained deep learning had an average accuracy of 95.7%. The relationship between the ratio of crickets at each growth stage throughout the 45-day rearing period was plotted and discussed. The results also showed a clear relationship between the amount of food consumed by crickets per day and their growth stage, which could be useful for appropriately managing food consumption according to the growth stage of crickets. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, A nano-scale transducer using a PANDA type ring resonator for gas sensor applications(2012-03-01); ; - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Accurate RMS calculations for periodic signals by Trapezoidal rule with the least data amount(2013-11-12); ; ; The purpose of this research is to present a simple method using the least data amount to calculate root mean square (RMS) values of periodic signals (constructed from Fourier series) which the highest harmonic order is known or able to be estimated. In the research, trapezoidal rule with the least data amount was proved and tried to calculate definite integral values of sinusoidal signals from a lot of trial runs until a significant property was found. Then the property would be deployed to calculate RMS values. Results of the research can provide not only more convenient processes of simple trapezoidal rule but also more accurate results than the patented Simpson's rule in the same least data amount. © 2013 Sompop Poomjan et al. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Elongation measurement using 1-dimensional image correlation method(2016-01-01); Aim of this paper was to study, setup, and calibrate an elongation measurement by using 1- Dimensional Image Correlation method (1-DIC). To confirm our method and setup correctness, we need calibration with other methods. In this paper, we used a small spring as a sample to find a result in terms of spring constant. With a fundamental of Image Correlation method, images of formed and deformed samples were compared to understand the difference between deformed process. By comparing the location of reference point on both image's pixel, the spring's elongation were calculated. Then, the results have been compared with the spring constants, which were found from Hooke's law. The percentage of 5 percent error has been found. This DIC method, then, would be applied to measure the elongation of some different kinds of small fiber samples. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Micro stirling engine controlled by light(2011-01-01); ; Yupapin, P. P.This paper proposes a new technique for a micro Stirling engine operation using leaky light resonant or whispering gallery modes (WGMs) in a nano-waveguide, in which the nano-waveguide is designed and configured by a nanoring resonator. By using the Optiwave programming based on Finite Difference Time-Domain (FDTD) method, an InGaAsP/InP nanoring resonator was designed and simulated. The simulation results obtained have shown that the leaky light resonant modes can be controlled by the ring radius variations, whereas the maximum resonant peak of nanoring resonator is occurred at the inner and outer ring radii of 0.775 and 1.55 μm respectively. The maximum peak intensity of the nanoring resonator is 12000 W/m<sup>2</sup>. Finally, the use of leaky light mode resonant peak of the center nanoring resonator for micro-Stirling engine is discussed in details. © 2011 Published by Elsevier Ltd. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Design and simulation of asymmetric Y-junction beam splitter with controllable splitting based on adjusted air-hole defect(2022-01-01); ; ; We report a construction of a new asymmetric Y-junction beam splitter with a controllable splitting ratio and simulate this splitter. The splitter is based on InP, has the area 65.0 µm<sup>2</sup> and operates at the light wavelengths 1.48 and 1.55 µm. Under condition of no air-hole defect, the splitting ratio for the output ports 1 and 2 is equal to 92/8 at the both wavelengths. To control the splitting ratio, air-hole defects with different (diamond, square and cylinder) shapes are introduced at the junction between the two output ports. Our simulations confirm that the splitting ratio of the beam splitter can be efficiently controlled by changing the size and the shape of the air-hole defect. The maximal splitting ratios at our operating wavelengths are equal to 10/90 and 14/86 and the appropriate average insertion losses amount to 0.36 and 0.31 dB for all of defect shapes. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, The effect of substrate temperature on structure and optical properties of copper (II) phthalocyanine (CuPc) thin films prepared by organic evaporation(2007-08-28); ; - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Laser-Carved Legacy: Exploring the Scientific Construction and Cultural Significance of the World’s Largest Golden Buddha in Thailand Through a Tourist Perspective(2025-10-01); - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Low-cost tunable light source using RGB-LED module for absorption spectroscope(2019-01-01);