Pukkalanun, Tattaya
Loading...
Preferred name
Pukkalanun, Tattaya
Alternative Name
Pukkalanun, T.
Main Affiliation
Email
tattaya.pu@kmitl.ac.th
8 results
Now showing 1 - 8 of 8
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Realization of Lossy Parallel Inductance Simulator Using Single VDGA and a Grounded Capacitor(2022-01-01); ; An active lossy parallel type inductance simulator is proposed in this study. Only a single voltage differencing gain amplifier (VDGA) and a grounded capacitor are used in the proposed design. The realized equivalent resistance (Req) and equivalent inductance (Leq) can be adjusted electronically via the transconductance gain of the VDGA device. The influence of the non-idealities of the VDGA on the realized simulator is examined in detail. The suggested active inductance simulator is used to realize the second order voltage mode highpass filter, which is simulated using the PSPICE simulation program to ensure that it performs as expected. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, High-Input-Impedance Four-Input Single-Output Voltage-Mode Biquadratic Filter with Only VDTAs and Grounded Capacitors(2022-01-01); This paper presents a voltage-mode universal biquadratic filter with voltage differencing transconductance amplifiers (VDTAs) as active components. The proposed filter comprises four inputs and a single output and can perform all five general biquadratic filter functions, namely lowpass, bandpass, highpass, bandstop, and allpass responses, without modifying the circuit architecture. It also offers the advantages of resistorless implementation with only two grounded capacitors, orthogonal adjustment of the natural angular frequency and the quality factor, as well as the absence of any constraint related to the values of input signals. Moreover, because the circuit contains all of the high input impedance levels, it may be cascaded without the requirement of additional buffers. The suggested filter's functioning has been validated by simulations using the PSPICE application. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Design of Mixed-Mode Analog PID Controller with CFOAs(2024-05-01); ; The design of a mixed-mode proportional-integral-derivative (PID) controller circuit using current-feedback operational amplifiers (CFOAs) as active components is proposed. With the same circuit topology, the proposed configuration of three CFOAs, four resistors, and two capacitors is capable of performing the PID controller in each of the following four modes: voltage mode, trans-admittance mode, current mode, and trans-impedance mode. Numerous mathematical analyses are conducted to determine the controller’s performance under both ideal and non-ideal conditions. Additionally, the mixed-mode second-order lowpass filter is suggested and also used to examine the workability of the proposed mixed-mode PID controller in a feedback control structure. The proposed PID controller is implemented with the commercially available IC-type CFOA AD844, and the simulation results are presented to illustrate the functionality of the controller and its closed-loop control system. According to the findings, the total power consumption of the proposed PID controller is 0.348 W, with symmetrical supply voltages of ±9 V. It also has a temperature variation of less than 0.2% over the AD844’s usable range. Monte Carlo statistical analysis results revealed that the gain responses of the controller exhibited a deviation of no more than 7.72% from the theoretical value. The controlled filter in a closed-loop control system has a 43% faster rise time and peak time than the uncontrolled filter in all four modes of operation. It also has a steady-state error less than 0.2 mV for voltage responses and 0.72 µA for current responses. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Differential Difference Gain Amplifier (DDGA) and Its Applications(2025-07-01); This article introduces a CMOS circuit realization of the fully balanced differential difference gain amplifier (DDGA). The proposed DDGA is realized using four floating current sources operating under dual supply voltages of approximately ∓0.9 V. The proposed circuit can function as a differential difference gain amplifier with electronically adjustable gain both in voltage and current-modes. The application designs of the DDGA to implement a single-input three-output universal biquad filter and voltage-mode quadrature oscillator circuit are also suggested. PSPICE simulation results for the proposed DDGA and its applications are provided using 0.18-μm CMOS technology from TSMC. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Electronically tunable current-mode universal filter using VDTAs and grounded capacitors(2013-01-01); In this paper, an electronically tunable current-mode universal filter with three inputs and one output employing two voltage differencing transconductance amplifier (VDTA) and two grounded capacitors is proposed. The presented circuit can configure to realize all the five standard biquadratic filter functions; lowpass, bandpass, highpass, bandstop and allpass without changing the circuit configuration and needing an external passive resistor. The proposed filter is capable of providing an independent current-control of the natural angular frequency (ωo) and quality factor (Q) through the VDTA's transconductance and low incremental active and passive sensitivities. The performance of the proposed filter is tested using PSPICE simulation program, and the results agree well with the theoretical analysis. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Electronically tunable single-input five-output voltage-mode universal filter using VDTAs and grounded passive elements(2013-06-01); This paper presents a possible usage of the voltage differencing transconductance amplifier (VDTA) for the design of an electronically tunable single-input five-output voltage-mode universal filter. The presented filter is constructed using two VDTAs, two capacitors and two resistors that are all grounded. The circuit simultaneously realizes lowpass (LP), bandpass (BP), highpass (HP), bandstop (BS) and allpass (AP) filtering responses, without changing the circuit topology. The circuit is capable of providing an independent electronic control of the natural angular frequency (ω <inf>0</inf>) and the quality factor (Q) through the transconductance gains of the VDTAs. By simply adjusting the transconductance ratio, a high-Q filter can also be obtained. Because of the high-input impedance of the circuit, it is advantageous for cascade connection. To support the theoretical analysis, the properties of the designed filter have been verified by PSPICE simulation results. © 2012 Springer Science+Business Media, LLC. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Current-mode KHN biquad filter using modified CFTAs and grounded capacitors(2011-07-26); In this paper, a current-mode Kerwin-Huelsman-Newcomb (KHN) filter structure employing four modified current follower transconductance amplifiers (MCFTAs) and two grounded capacitors is proposed. The circuit structure has one low-impedance current input and three high-impedance current outputs, and enables realizing lowpass, bandpass and highpass current responses simultaneously. The bandstop and allpass responses can also be obtained by connecting appropriate output currents directly without additional devices. The proposed filter is capable of providing an independent current-control of the natural angular frequency (ω<inf>0</inf>) and quality factor (Q) through the transconductance of the MCFTA. Moreover, high-Q value filter can be realized by simply tuning the ratio of MCFTA's transconductance. To support the theoretical results, the properties of the presented filter have been verified by simulation results. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, LOW-VOLTAGE TEMPERATURE-INSENSITIVE LOGARITHMIC AND EXPONENTIAL FUNCTION CURRENT GENERATORS USING ONLY NPN TRANSISTORS(2025-01-31); ; The continuing reduction of supply voltage for reliable operation of analog integrated circuits is widely recognized. Analog circuits must adhere to this trend. As a result, researchers are currently developing low-voltage analog circuit methodologies. Current-mode signal processing circuits are examples of these concepts. Therefore, the objective of this work is to present circuit realizations of low-voltage current-mode logarithmic and exponential function generators with temperature compensation. Both the input and output signals operate in current mode. The design approach utilizes the current-mode translinear technique to produce the output currents that exhibit a directly proportionality to the absolute values of the logarithmic and exponential functions. By simply adjusting the external bias currents, one can electronically tune the output currents and transfer current gains for both proposed circuits. The proposed circuits utilize only npn bipolar transistors and can operate with low-level supply voltages of ±1 V, which are appropriate for low-power, high-frequency applications. Nonideality performance considerations are also discussed in detail. In order to verify the operational function of the circuits and illustrate their superior thermal stability, the PSPICE simulation has been performed using real transistor models provided for the HFA3096 mixed bipolar array technology. The simulation findings illustrate that the proposed logarithmic and exponential amplifier circuits can compensate for temperature variations, as evidenced by the good stability of their output currents over a temperature range of –40 °C to 100 °C.