Tammarugwattana, Narin
Loading...
Preferred name
Tammarugwattana, Narin
Alternative Name
Tammarugwattana, N.
Main Affiliation
Email
narin.ta@kmitl.ac.th
3 results
Now showing 1 - 3 of 3
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Study of optical and electrical properties of tin doped cobalt-phthalocyanine thin films prepared by thermal co-evaporation(2018-09-05); ; ; The aim of this research is to study the specific properties e.g. surface morphology, optical absorption as well as electrical conductivity of tin-doped cobalt-phthalocyanine (CoPc) thin film prepared by thermal co-evaporation. The concentration of tin metal dopant is controlled via evaporation rate during film's preparation. The change of tin quantity leads to the significant changes not only in morphology but also in molecular packing of the doped films. Moreover, the dramatic increase in both carrier mobility and carrier concentration should provide the enhancement in electrical conductivity of the doped films. By controlling the specific properties of the tin-doped CoPc thin film, the increasing efficiency of optoelectronic applications based on metal-phthalocyanine could be achieved. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Influence of Antimony Species on Electrical Properties of Sb-Doped Zinc Oxide Thin Films Prepared by Pulsed Laser Deposition(2023-06-01); ; ; This study systematically investigates the influence of antimony (Sb) species on the electrical properties of Sb-doped zinc oxide (SZO) thin films prepared by pulsed laser deposition in an oxygen-rich environment. The Sb species-related defects were controlled through a qualitative change in energy per atom by increasing the Sb content in the Sb<inf>2</inf>O<inf>3</inf>:ZnO-ablating target. By increasing the content of Sb<inf>2</inf>O<inf>3</inf> (wt.%) in the target, Sb<sup>3+</sup> became the dominant Sb ablation species in the plasma plume. Consequently, n-type conductivity was converted to p-type conductivity in the SZO thin films prepared using the ablating target containing 2 wt.% Sb<inf>2</inf>O<inf>3</inf>. The substituted Sb species in the Zn site (Sb<inf>Zn</inf><sup>3+</sup> and Sb<inf>Zn</inf><sup>+</sup>) were responsible for forming n-type conductivity at low-level Sb doping. On the other hand, the Sb–Zn complex defects (Sb<inf>Zn</inf>–2V<inf>Zn</inf>) contributed to the formation of p-type conductivity at high-level doping. The increase in Sb<inf>2</inf>O<inf>3</inf> content in the ablating target, leading to a qualitative change in energy per Sb ion, offers a new pathway to achieve high-performing optoelectronics using ZnO-based p–n junctions. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Enhancement of sensing characteristics of Polydimethylsiloxane-based capacitive force sensor by introducing conductive polymer to dielectric layer(2021-01-01); ; ; Jessadaluk, SukittayaA capacitive force sensor is one of the electronics components used in several electronic devices and applications. An improvement of sensing characteristics of the sensor, for example sensitivity and response time, becomes an interesting research topic. The alternative approach to enhance the sensitivity and response time of polydimethylsiloxane-based capacitive force sensors is proposed by introducing poly(3,4-ethylenedioxythiophene) polystyrene sulphonate, a conductive polymer, into polydimethylsiloxane active layer. Two sensors using different active layers, (i) polydimethylsiloxane (conventional sensor) and (ii) poly(3,4-ethylenedioxythiophene) polystyrene sulphonate mixed polydimethylsiloxane (modified sensor), were fabricated and characterised to reveal the sensing enhancement. Interestingly, the modified sensor shows the significant increase in the sensitivity from 0.7 to 1.14 kPa<sup>–1</sup> (+62.86%) and the shortening response time from 1.55 to 0.43 s (−72.26%) with respect to the conventional sensor. In addition, the deterioration in elastic behaviour and the faster charge–discharge behaviour observed from the poly(3,4-ethylenedioxythiophene) polystyrene sulphonate mixed polydimethylsiloxane film indicate the better deformation and charge transport than that from polydimethylsiloxane film. Therefore, it can be concluded that the conductive poly(3,4-ethylenedioxythiophene) polystyrene sulfonate additive plays the role of mechanical and electrical modification of the polydimethylsiloxane active layer leading to the enhancement in sensitivity and response time of the polydimethylsiloxane-based capacitive force sensor.