Mano, Kitipong
Loading...
Preferred name
Mano, Kitipong
Main Affiliation
Email
kitipong.ma@kmitl.ac.th
3 results
Now showing 1 - 3 of 3
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Study on optical and electronic properties of Sn-doped ZnPc(2013-10-29); ; Sn doped ZnPc films were deposited on intrinsic Si and glass substrates by organic source thermal co-evaporation technique with different deposition rates. Optical properties and electronic structure were characterized by UV-Vis spectroscopy and X-ray photoelectron spectroscopy (XPS) respectively. The UV-Vis results showed that phase transition of ZnPc from α- phase to β-phase occurred when Sn:ZnPc deposition rate is 0.3:0.7 or higher. XPS results indicated that the outer s electron of Sn atom is transferred to the ZnPc. Broadening of the C 1s spectra is observed with the increasing of Sn deposition rate. This broadening corresponds to the change of molecular environment surrounding carbon atoms in the Sn-doped ZnPc films. © (2013) Trans Tech Publications, Switzerland. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Influence of Antimony Species on Electrical Properties of Sb-Doped Zinc Oxide Thin Films Prepared by Pulsed Laser Deposition(2023-06-01); ; ; This study systematically investigates the influence of antimony (Sb) species on the electrical properties of Sb-doped zinc oxide (SZO) thin films prepared by pulsed laser deposition in an oxygen-rich environment. The Sb species-related defects were controlled through a qualitative change in energy per atom by increasing the Sb content in the Sb<inf>2</inf>O<inf>3</inf>:ZnO-ablating target. By increasing the content of Sb<inf>2</inf>O<inf>3</inf> (wt.%) in the target, Sb<sup>3+</sup> became the dominant Sb ablation species in the plasma plume. Consequently, n-type conductivity was converted to p-type conductivity in the SZO thin films prepared using the ablating target containing 2 wt.% Sb<inf>2</inf>O<inf>3</inf>. The substituted Sb species in the Zn site (Sb<inf>Zn</inf><sup>3+</sup> and Sb<inf>Zn</inf><sup>+</sup>) were responsible for forming n-type conductivity at low-level Sb doping. On the other hand, the Sb–Zn complex defects (Sb<inf>Zn</inf>–2V<inf>Zn</inf>) contributed to the formation of p-type conductivity at high-level doping. The increase in Sb<inf>2</inf>O<inf>3</inf> content in the ablating target, leading to a qualitative change in energy per Sb ion, offers a new pathway to achieve high-performing optoelectronics using ZnO-based p–n junctions. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Growth and characterizations of tin-doped nickel-phthalocyanine thin film prepared by thermal co-evaporation as a novel nanomaterialThe aim of this research is to control specific properties of nickel-phthalocyanine (NiPc) thin film by doping with tin (Sn). The hybrid thin films, Sn-doped NiPc, were fabricated by thermal co-evaporation as a function of Sn concentration. The quantity of Sn in NiPc matrix was controlled via the different deposition rate between Sn and NiPc. The specific properties of the hybrid films, e.g. morphology, optical absorption, chemical bonding as well as electrical characteristics of the devices used such hybrid material as an active layer were characterized by combinations of microscopic and spectroscopic techniques. The experimental results evidently present the modification of thin film properties by adding Sn into NiPc matrix, i.e. the change of morphology from granules to fibers, the increase of beta-phase formation in the films as well as the enhancement of electrical properties resulting from the increase of both charge carrier mobility and carrier concentration in the hybrid material. Moreover, the internal formation of the Sn-doped NiPc reveals that Sn dopants are embedded in the NiPc matrix as Sn metal clusters coated with derivative metal oxide of Sn (SnO<inf>x</inf>). This research demonstrates that the doping metal-phthalocyanine with metal is an alternative approach to control the specific properties that possibly suit for organic electronic applications.