Pongswatd, Sawai
Loading...
Preferred name
Pongswatd, Sawai
Alternative Name
Pongswatd, S.
Main Affiliation
Email
sawai.po@kmitl.ac.th
24 results
Now showing 1 - 10 of 24
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Toward Interoperable SCADA: Node-RED-Based Edge Integration of Heterogeneous PLCs and IoT Devices(2025-01-01); ; This article presents a novel approach to supervisory control and data acquisition (SCADA) design that emphasizes interoperability through edge integration, using Node-RED as an open-source programming platform deployed on an industrial edge computer. The proposed architecture integrates multiple-vendor programmable logic controllers (PLCs) and an Internet of Things (IoT) gateway at the edge layer to enable seamless interoperability across local control systems. A lab-scale case study demonstrates the feasibility of this integration, featuring four remote terminal units (RTUs) communicating concurrently with a SIMATIC IPC327G edge computer via standard protocols. Specifically, a SIMATIC S7-1200 (RTU-1), MELSEC iQ-F FX5U (RTU-2), and CompactLogix 1769-L30ER (RTU-3) control an object sorting station, a parcel sorting station, a water temperature control station, respectively, while a UG65 gateway (RTU-4) enables bidirectional data transfer between the edge computer and LoRaWAN devices. The inclusion of InfluxDB alongside Node-RED supports data logging and reporting functionalities. By distributing protocol translation, data processing, and shop-floor supervisory control to the edge layer, the architecture achieves real-time, vendor-neutral data orchestration while maintaining compatibility with a higher-level SCADA master terminal unit (MTU) or cloud system. Experimental results from both functional and performance testing confirm the system’s viability as a cost-effective, vendor-agnostic solution for modern industrial automation, offering a scalable model for multi-protocol industrial environments. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Foundation fieldbus-based laboratory: A case study of Harmonas-DEO system(2011-01-01); ; ; Julsereewong, PrasitThis paper presents a Foundation Fieldbus-based laboratory for education of automation infrastructure. Design and implementation of a level-control plant model using multi-vendor field devices is proposed. Harmonas-DEO fieldbus system is described as an illustrative case study for configuring and commissioning fieldbus segment, defining control strategy, designing human machine interface (HMI) screen, and troubleshooting. Fieldbus control valve diagnostics based on the use of Valstaff are also included. © 2011 SICE. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Digital fieldbus-Analog system integration for revamping projectsThis paper presents a system integration of modern digital fieldbus and traditional analog devices for revamping projects. Using temperature transmitter with Foundation Fieldbus technology and power regulator with 4-20 mA control input for temperature control based on a PID instruction of programmable logic controller (PLC) is examined as an illustrative case study. A portable plant model was designed and implemented for real hands-on training. In addition, basic network and device configurations as well as ladder logic program and graphical user interface creations are discussed. Experimental results of temperature control in the range of 40-60 °C verifying the proposed concept are also included. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, A voltage/current controlled oscillator using OTAs and RS flip flop(2008-12-01); ; - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Buck converter controlled by using variable switching frequency technique(2008-12-01); ; - Some of the metrics are blocked by yourconsent settings
Item type:Publication, PFD analysis of LNG fuel gas supply system for improving combined-cycle power plant safety(2022-04-01); ; In order to determine an unavailability of each safety function subsystem that influences on an overall unavailability of entire protection system for safety analysis and enhancement, a modeling is required. This article presents a safety system modeling to evaluate the detected–undetected failures and repairable behaviors of each safety function subsystem in the studied fuel gas supply system (FGSS), which is utilized in a combined-cycle power plant. The proposed modeling deals with probability of failure on demand (PFD) analysis for calculation of the unavailability of three safety function subsystems, which are gas analytical subsystem (GAS), fuel gas controller subsystem (FGC), and shutdown valve subsystem (SDV). The interested GAS includes two different groups of gas analyzers in 2-out-of-2 (2oo2) voting scheme, when using three gas analyzers in each group in 2-out-of-3 and diagnosis (2oo3D) voting scheme. The interested FGC consists of two controllers in 2oo2 voting scheme, when the structure of each controller is in 1-out-of-1 and diagnosis (1oo1D) voting scheme. The interested SDV consists of two shutdown valves, which are installed in 1-out-of-2 (1oo2) voting scheme. The reliability block diagram is utilized for representative of combination of all three safety function subsystems, and the fault tree is utilized for calculation of PFD unavailability of each safety function subsystem. As the results obtained from the proposed safety function modeling, the influence of three safety function subsystems on the total unavailability of the FGSS is described. In addition, an example of the proposed modeling application to provide two guidelines for effective engineering design and operation is also presented. The first is a guideline to implement an effective human machine interface (HMI) at an operator workstation for real-time monitoring of the studied FGSS in the presence of failures that can be automatically detected by device diagnosis. The latter is a guideline to maintain and troubleshoot the failures that can be revealed by proof test. Based on diagnostic information and proof test results, operation and maintenance savings can be achieved. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Simple CCO using cciis and S-R latch and its application(2010-06-01); ; ; Sasaki, HlrofumiThis article presents a, simple circuit technique based on commerciallyavailable devices to realize current controlled, oscillator (CCO) with twolow-impedance input terminals. By suitably setting two input signals, the linearfrequency-current relation of the proposed CCO can be either positive ornegative slope in the same circuit configuration. The oscillating outputfrequency linearly proportional to the difference between two input currents canbe obtained. The realization method is employed in second-generation currentconveyors (CCIIs) and, Set-Reset (S-R) latch. Experimental results verifyingperformances of the proposed, CCO are closely agreed, with expected, values. Toshow the usefulness of the proposed, oscillator, an application example incurrent-mode variable- frequency control for buck converter is also included.ICIC International © 2010. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Simple VCO with negative voltage-frequency relation(2008-12-01); ; - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Design and implementation of the laboratory for foundation Fieldbus-Based industrial automation(2012-05-01); ; ; Julsereewong, PrasitThis article focuses on a design and implementation of the laboratory for education of Foundation Fieldbus-based industrial automation. A Centum VP system connected with level-control plant model via field digital network is described as an illustrative case study for configuring and commissioning fieldbus segment, defining control strategy, designing human machine interface (HMI) screen, and troubleshooting. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Design of a dual-input buck-boost converter for mobile back-lighting applications(2012-04-01); ;