Rahong, Sakon
Loading...
Preferred name
Rahong, Sakon
Alternative Name
Rahong, S.
Main Affiliation
Email
sakon.ra@kmitl.ac.th
38 results
Now showing 1 - 10 of 38
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, ZnO Nanorods Grown on Heterogenous Ag Seed Layers for Single-Cell Fluorescence Bioassays(2021-07-23) - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Superparamagnetic nanoparticles encapsulation via droplet-based microfluidics for targeted drug delivery system(2019-01-01); ; - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Metal Oxide Nanostructures Enhanced Microfluidic Platform for Efficient and Sensitive Immunofluorescence Detection of Dengue Virus(2023-11-01) - Some of the metrics are blocked by yourconsent settings
Item type:Publication, The enhancement of sensitivity and response times of PDMS-based capacitive force sensor by means of active layer modification(2021-06-01); ; ; Jessadaluk, SukittiyaIn this work, sensitivity and response times of PDMS-based capacitive force sensors are enhanced via the modifications of the PDMS layer. Two modifying approaches are proposed; (i) change PDMS's (elastomer:curing agent) ratio and (ii) adding conductive polymer PEDOT:PSS into the PDMS layer. The change of PDMS (elastomer:curing agent) ratio from (10:1) to (30:1) increases the sensitivity from 0.4 0.08 to 0.72 0.23 kPa-1 (+80%) but it does not significantly affect the response/recovery times. In addition, by adding 1% wt. of PEDOT:PSS to PDMS (30:1), the further increment of sensitivity from 0.72 0.23 to 1.44 0.17 kPa-1 (+100%) and the shorter response time from 1.59 0.02 to 0.45 0.03 s (-72%) are observed. The mechanical and electrical studies reveal that the change of PDMS (elastomer:curing agent) ratio and the adding of PEDOT:PSS to PDMS layer result in the modification of PDMS's deformability and the increase of charge transportation, leading to the enhancement of sensing characteristics of the sensors. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Growth and characterization of novel optoelectronic materials. Based on II-VI inorganic/organic heterostructures(2006-01-01); ; ; Novel optoelectronic materials based on II-VI inorganic/organic low-dimensional heterostructure were successfully grown by electron beam evaporator. The structures were based on ZnSe, tris(8-hydroxyquinoline) aluminum (Alq<inf>3</inf>) and N,N'-bis(3-methylphenyl)-N,N'-diphenyl-benzidine (TPD). The surface morphology of the structures was investigated by atomic force microscopy and field emission scanning electron microscope. The optical and electronic properties were examined by photoluminescence, photocurrent and electroreflectance spectroscopy. Photoluminescence spectra of the ZnSe/Alq <inf>3</inf>/ZnSe structure attributed to the change of exciton energy as a result of quantum confinement showed the formation of single quantum well structure. The luminescence color can be varied by changing the thickness of the Alq<inf>3</inf> layer. The other heterostructure of ZnSe/Alq<inf>3</inf>/TPD was grown on silicon substrate. The wavelength response of this structure shown by photocurrent signal ranged from 450 nm to 1100 nm. Electroreflectance features due to optical transition energy of the single quantum well of this structure were also observed. Under applied voltage, electroreflectance signals showed significant shift due to the quantum confined Stark effect. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Annealed zno/al2o3 core-shell nanowire as a platform to capture rna in blood plasma(2021-07-01); Wuthikhun, TuksadonRNA analytical platforms gained extensive attention recently for RNA-based molecular analysis. However, the major challenge for analyzing RNAs is their low concentration in blood plasma samples, hindering the use of RNAs for diagnostics. Platforms that can enrich RNAs are essential to enhance molecular detection. Here, we developed the annealed ZnO/Al<inf>2</inf>O<inf>3</inf> core-shell nanowire device as a platform to capture RNAs. We showed that the annealed ZnO/Al<inf>2</inf>O<inf>3</inf> core-shell nanowire could capture RNAs with high efficiency compared to that of other circulating nucleic acids, including genomic DNA (gDNA) and cell-free DNA (cfDNA). Moreover, the nanowire was considered to be biocompatible with blood plasma samples due to the crystalline structure of the Al<inf>2</inf>O<inf>3</inf> shell which serves as a protective layer to prevent nanowire degradation. Our developed device has the potential to be a platform for RNA-based extraction and detection. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Electroreflectance and photocurrent measurement of ZnSe/Alq 3/TPD heterostructure on Si-substrate(2005-11-20); ; ; The optical transition energy in ZnSe/tris(8-hydroxyquinoline) aluminum (Alq<inf>3</inf>)/N,N′-bis(3-methylphenyl)-N,N′-diphenyl-benzidine (TPD) heterostructure were investigated by room-temperature electroreflectance (ER) and photocurrent (PC) measurements. PC signal showed wavelength response of the device in the range of 450-1100 nm. ER features due to optical transition energy of the single quantum well of this structure were observed. The transition energies were determined by fitting the ER spectra to the theoretical line-shape expression. The subband transition energy decreased with increasing well thickness. Under applied voltage, both ER signals show significant shift due to the quantum confined Stark effect. © 2005 Elsevier B.V. All rights reserved. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Influence of Dragon Fruit Peels on the Synthesis of Antibacterial Nano Zinc Oxide (Nano-ZnO) via Green Synthesis Method(2026-05-20); ; This research focused on adding value to dragon fruit peel waste by utilizing it in the synthesis of antibacterial nano zinc oxide (Nano-ZnO) through a green synthesis process. In this study, all the dragon fruit peels were extracted using the solvent extraction technique with three different solvents (deionized water, ethanol, and methanol) for 1, 2, 3, 4, and 5 h, respectively. The amount of flavonoids from the extract was determined using UV-Vis spectrophotometer to obtain the optimum extraction time, which was 4 h for DI water as the solvent. Moreover, antibacterial Nano-ZnO was synthesized successfully by a green synthesis process using zinc nitrate Zn(NO3)2 and the extracts. The molecular vibrations as well as the crystal structure and morphology were investigated by Fourier transform infrared spectroscopy (FT-IR), Raman spectroscopy (Raman), X-ray diffraction (XRD), and field emission scanning electron microscopy (FE-SEM), respectively. Additionally, the antibacterial efficacy of the nano-zinc oxide samples was evaluated using disc diffusion method. Gram-positive bacteria (Staphylococcus aureus) and Gram-negative bacteria (Escherichia coli) were the test agents. The research shows that the X-ray diffraction patterns of all synthesized ZnO nanoparticles (NPs) exhibited a wurtzite (hexagonal) crystal structure. FT-IR spectroscopy confirmed the presence of Zn-O stretching vibrations at approximately 500 cm⁻¹. Furthermore, the FE-SEM reveals that ZnO-yellow particles displayed spherical morphologies with an average particle size of 145 nm. At the same time, ZnO-White and ZnO-Red nanoparticles exhibited a combination of rod-like and elliptical morphologies, with average particle sizes of 168 nm and 321 nm, respectively. In addition, the antibacterial activity demonstrates effective inhibition against S. aureus and E. coli in all three ZnO nanoparticle conditions. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Unveiling massive numbers of cancer-related urinary-microRNA candidates via nanowires(2017-12-01) - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Improved Efficiency of Polymer Solar Cells by means of Coating Hole Transporting Layer as Double Layer Deposition(2017-10-20); ; ; Polymer solar cells is one of the promising technologies that gain tremendous attentions in the field of renewable energy. Optimization of thickness for each layer is an important factor determining the efficiency of the solar cells. In this work, the optimum thickness of Poly(3,4-ethylenedioxythione): poly(styrenesulfonate) (PEDOT:PSS), a famous polymer widely used as hole transporting layer in polymer solar cells, is determined through the analyzing of device's photovoltaic parameters, e.g. short circuit current density (J<inf>sc</inf>), open circuit voltage (V<inf>oc</inf>), fill factor (FF) as well as power conversion efficiency (PCE). The solar cells were prepared with multilayer of ITO/PEDOT:PSS/PCDTBT:PC<inf>70</inf>BM/TiO<inf>x</inf>/Al by rapid convective deposition. In such preparation technique, the thickness of the thin film is controlled by the deposition speed. The faster deposition speed is used, the thicker film is obtained. Furthermore, double layer deposition of PEDOT:PSS was introduced as an approach to improve solar cell efficiency. The results obviously reveal that, with the increase of PEDOT:PSS thickness, the increments of J<inf>sc</inf> and FF play the important role to improve PCE from 3.21% to 4.03%. Interestingly, using double layer deposition of PEDOT:PSS shows the ability to enhance the performance of the solar cells to 6.12% under simulated AM 1.5G illumination of 100 mW/cm<sup>2</sup>.